GE STXCAN001 RSTi网络适配器模块

【产品详情】

STXCAN001 CANopen网络适配器属于GE Fanuc制造的PACSystems RSTi网络适配器模块系列。它构成了 I/O 设备与现场总线和现场设备之间的链接。它一次最多可以处理 32 个 I/O 设备。它必须安装在 I/O 站中 RSTi 模块的左侧。它带有一个可拆卸的端子组件，该组件具有 8 个端子。STXCAN001 CANopen 网络适配器有 4 个 LED 指示灯，分别是“CAN-RUN”、“CAN-ERR”、“Bus”和“Field Power”LED。该模块的一般规格包括 24 伏直流电源电压、11 至 28.8 伏直流电源电压范围、100 伏直流电下的 24 毫安额定功率耗散和 1 伏直流电下 I/O 模块的 5.5 安培电流。

STXCAN001 CANopen网络适配器模块有99个节点。最大输入大小为 32 个字，最大输出大小也是 32 个字。它具有每秒 10 千比特到 1 兆比特/秒的支持通信速率。它提供网络到逻辑侧隔离和逻辑到现场电源隔离。模块重量为 155 克，模块尺寸为 45 x 99 x 70 毫米。STXCAN001 CANopen网络适配器模块有8个发送和接收PDO。它有 1 个标准 SDO。建议使用符合 ISO 11898 标准中定义的要求的电缆、终端电阻器和连接器。模块的工作温度为 -20 至 55 摄氏度。确保在开始适配器操作之前设置模块的波特率。该模块是 cUL 列出的工业控制设备，还带有 CE 认证，以表明它符合所有相关的工业标准。

GE STXCAN001 RSTi网络适配器模块

【英文介绍】

The STXCAN001 CANopen network adapter belongs to the PACSystems RSTi network adapter module family manufactured by GE Fanuc. It forms the link between the I/O devices and the fieldbus and field devices. It can handle up to 32 I/O devices at a time. It must be installed on the left side of the RSTi module in the I/O station. It comes with a detachable terminal assembly that has 8 terminals. The STXCAN001 CANopen network adapter has four LED indicators, namely "CAN-RUN", "CAN-ERR", "Bus" and "Field Power" LED. The general specifications of the module include 24 volts DC supply voltage, 11 to 28.8 volts DC supply voltage range, 24 MA rated power dissipation at 100 volts DC, and 5.5 amps of current for the I/O module at 1 volt DC.

The STXCAN001 CANopen network adapter module has 99 nodes. The maximum input size is 32 words, and the maximum output size is also 32 words. It has a supported communication rate of 10 kilobits per second to 1 megabit per second. It provides network-to-logical side isolation and logical-to-field power isolation. The module weighs 155 grams and the module dimensions are 45 x 99 x 70 mm. The STXCAN001 CANopen Network adapter module has 8 send and receive Pdos. It has a standard SDO. Cables, terminal resistors and connectors that meet the requirements defined in ISO 11898 are recommended. Modules operate at -20 to 55 degrees Celsius. Make sure to set the baud rate of the module before starting the adapter operation. The module is a cUL listed industrial control device and also carries CE certification to show that it complies with all relevant industry standards.

GE STXCAN001 RSTi网络适配器模块

【其他型号推荐】