IC670MDL642 控制模块 具有真实值的信号

【产品详情】

IC670MDL642场控制模块由GE Fanuc设计和制造，包括正输入和负输入。用户可以为模块的 16 个输入选择外部逻辑电源，该外部电源与输入和分配的 I/O 接线端子相结合。当主开关闭合时，IC670MDL642现场控制模块发送具有真实值的信号。正输入将电流引导至电源总线，该总线为公共或负电流类型。这意味着负输入接收来自电源总线的电流，该总线是公共或正电流类型。IC670MDL642现场控制模块的输入电压范围为 0 至 150 伏直流电，在额定电压下，用户输入电流为每点 2.5 毫安。

IC670MDL642现场控制模块的额定电压为 125 伏直流电，其隔离电压为 250 伏交流电（连续运行）和 1500 伏交流电（持续 1 分钟）。输入阻抗最小为 40K，响应时间为 6 毫秒（典型值），设备开启时最大为 10 毫秒。关闭状态的响应时间包括 6 毫秒的典型时间和 20 毫秒的最大时间。除此之外，IC670MDL642场控制模块的导通电流为 0.3 至 3 毫安，关断电流为 0 至 0.5 毫安。正逻辑的导通状态电压为 +79 至 +150 V，负逻辑的导通状态电压为 -79 至 -150 V。正逻辑的关断状态电压为 0 至 30 V，负逻辑的关断状态电压为 0 至 -30 V。

IC670MDL642 控制模块 具有真实值的信号

【英文介绍】

The IC670MDL642 field control module is designed and manufactured by GE Fanuc and includes both positive and negative inputs. The user can select an external logic power supply for the module's 16 inputs, which is combined with input and assigned I/O terminals. When the main switch is closed, the IC670MDL642 field control module sends a signal with a true value. The positive input directs the current to the power bus, which is a public or negative current type. This means that the negative input receives the current from the power bus, which is a public or positive current type. The input voltage range of the IC670MDL642 field control module is 0 to 150 volts DC, and the user input current is 2.5 MA per point at rated voltage.

The IC670MDL642 field control module has a rated voltage of 125 volts DC, and its isolation voltage is 250 volts AC (continuous operation) and 1500 volts AC (continuous 1 minute). The minimum input impedance is 40K, the response time is 6 ms (typical), and the maximum is 10 ms when the device is turned on. The response time for the off state includes a typical time of 6 milliseconds and a maximum time of 20 milliseconds. In addition, the IC670MDL642 field control module has a turn-on current of 0.3 to 3 mA and a turn-off current of 0 to 0.5 Ma. The on-state voltage of positive logic is +79 to +150 V, and the on-state voltage of negative logic is -79 to -150 V. The turn-off voltage for positive logic is 0 to 30 V, and the turn-off voltage for negative logic is 0 to -30 V.

IC670MDL642 控制模块 具有真实值的信号

【其他型号推荐】