IC200TBM005 弹簧夹插入 I/O 端子 提供连接

【产品详情】

IC200TBM005端子是 GE Fanuc Automation 的 Versamax 系列中的弹簧夹插入 I/O 端子。此特定终端用于在 I/O 载体和不同设备之间提供连接。该终端可以根据应用特性（如振动水平和机械冲击水平）以不同的方式安装。它可以安装在DIN导轨上，也可以安装在面板上。GE Fanuc Automation IC200TBM005弹簧夹插入 I/O 端子带有一张印刷卡，该卡通过铰链门盖插入，旨在保护卡的入口免受灰尘和灰尘等外部颗粒的影响。该端子适合在高达 8 安培的电流水平和 264 至 300 伏交流电的电压范围内运行。

GE Fanuc IC200TBM005是一款输入/输出 （I/O） 辅助弹簧夹式端子排。IC200TBM005 有 18 个内部总线接线端子。它可用于为插入 I/O 端子和端子式 I/O 载体提供额外的现场接线连接。辅助 I/O 端子排具有安装卡舌，用于连接到以前的载体。它们插入位于插入 I/O 端子或 I/O 载体底部的插槽中，以便快速方便地安装。需要时，以类似的方式连接额外的端子排。

该IC200TBM005还具有面板安装孔，可在高振动位置提供额外的稳定性。辅助 I/O 端子排能够容纳高达 8 A 的电流和高达 264 V AC 的电压电流水平。请注意，卷tage 水平高达 300 V AC 不会对设备造成损坏。插入式 I/O 端子或端子型 I/O 托架与辅助 I/O 端子排之间没有电气连接。因此，任何所需的电气基准都必须由用户提供。

GE Fanuc Automation IC200TBM005弹簧夹插入式 I/O 端子带有 18 个端子，可在 I/O 载体和其他插入端子之间提供额外的现场连接。该终端带有标签和插槽，分别与序列中的前一个载波和下一个终端一起使用。上部和底部标签的位置具有战略意义，因此安装过程快速方便。端子的上边缘插入 I/O 托架底部的插槽中，依此类推。GE Fanuc Automation IC200TBM005弹簧夹插入 I/O 端子还带有面板安装孔，因此可以将其固定在有明显机械振动和冲击的位置。通过这些孔，可以固定端子，以尽量减少因极端运动而造成的损坏。

IC200TBM005 弹簧夹插入 I/O 端子 提供连接

【英文介绍】

The IC200TBM005 terminal is a spring clip inserted into the I/O terminal in GE Fanuc Automation's Versamax series. This particular terminal is used to provide a connection between the I/O carrier and different devices. The terminal can be installed in different ways depending on application characteristics such as vibration level and mechanical shock level. It can be mounted on a DIN rail or on a panel. GE Fanuc Automation IC200TBM005 Spring clip insert I/O terminals come with a printed card that inserts through a hinged door cover and is designed to protect the card's entrance from external particles such as dust and dust. The terminals are suitable for operation in current levels up to 8 amps and voltage ranges from 264 to 300 volts AC.

The GE Fanuc IC200TBM005 is an input/output (I/O) auxiliary spring clip terminal block. The IC200TBM005 has 18 internal bus terminals. It can be used to provide additional field wiring connections for inserting I/O terminals and terminal type I/O carriers. The auxiliary I/O terminal block has mounting latches for connection to previous carriers. They are inserted into a slot located at the bottom of the inserted I/O terminal or I/O carrier for quick and easy installation. When required, connect additional terminal blocks in a similar manner.

The IC200TBM005 also features panel mounting holes to provide additional stability in high vibration locations. The auxiliary I/O terminal block is capable of holding currents up to 8 A and voltage current levels up to 264 V AC. Please note that rolling tage levels up to 300 V AC will not cause damage to the equipment. There is no electrical connection between the plug-in I/O terminal or terminal type I/O carrier and the auxiliary I/O terminal block. Therefore, any required electrical benchmarks must be provided by the user.

GE Fanuc Automation IC200TBM005 Spring Clip insert I/O terminals with 18 terminals provide additional field connections between I/O carriers and other insert terminals. This terminal comes with a label and a slot for use with the previous carrier and the next terminal in the sequence, respectively. The strategic placement of the upper and bottom labels makes the installation process quick and easy. Insert the upper edge of the terminal into the slot at the bottom of the I/O carrier, and so on. GE Fanuc Automation IC200TBM005 Spring clamps into I/O terminals also come with panel mounting holes, so they can be secured in positions where mechanical vibrations and shocks are evident. Through these holes, the terminals can be fixed to minimize damage caused by extreme movement.

IC200TBM005 弹簧夹插入 I/O 端子 提供连接

【其他型号推荐】