IC200PWR101 交流电源模块 模块供电

【产品详情】

GE Fanuc IC200PWR101模块是一个 120/240 伏交流电源模块，用于为安装在 PLC 机架背板上的设备和模块供电，包括网络接口单元、I/O 单元和中央处理器。该模块既可以作为主电源运行，也可以作为补充电源运行。如果连接到电源升压器载体，则此模块将用作补充电源。GE Fanuc IC200PWR101电源的输入功率和输入电压采用交流电（AC），而其他Versamax系列电源模块主要采用直流电（DC）。本机的输入电压额定值为 120/240 伏交流电，额定输入功率为 27 伏安培。它的输出电压为 5 伏直流电或 3.3 伏直流电。它既没有扩展电源，也没有隔离电源。该装置的保持时间约为 20 毫秒。

GE Fanuc Versamax IC200PWR101电源模块提供过载和短路保护。模块的总输出电流不应超过 1.5 Amps。如果输出电压额定值为 3.3 伏，则输出电流将达到 0.25 安培，而 5 伏输出电压将导致 1.5 安培的输出电流减去 3.3 伏的已用电流。它的频率范围在 47 到 63 赫兹之间。跳线安装和电压范围决定了IC200PWR101电源模块的输入电压。此电源模块的尺寸为 49 毫米（1.93 英寸）x 133.4 毫米（5.25 英寸）x 39 毫米（1.54 英寸）。

IC200PWR101 交流电源模块 模块供电

【英文介绍】

The GE Fanuc IC200PWR101 module is a 120/240 volt AC power module used to power devices and modules mounted on the backplane of the PLC rack, including the network interface unit, I/O unit, and central processing unit. The module can operate as either a primary power supply or a supplementary power supply. If connected to a power booster carrier, this module will be used as a supplementary power supply. The input power and input voltage of the GE Fanuc IC200PWR101 power supply use alternating current (AC), while other Versamax series power modules mainly use direct current (DC). The input voltage rating of the unit is 120/240 volts AC and the rated input power is 27 volts ampere. It has an output voltage of 5 volts DC or 3.3 volts DC. It has neither an extended power source nor an isolated power source. The holding time of the device is about 20 milliseconds.

The GE Fanuc Versamax IC200PWR101 power module provides overload and short circuit protection. The total output current of the module should not exceed 1.5 Amps. If the output voltage is rated at 3.3 volts, the output current will be 0.25 amps, while the 5 volt output voltage will result in 1.5 amps of output current minus 3.3 volts of used current. Its frequency range is between 47 and 63 Hertz. The jumper installation and voltage range determine the input voltage of the IC200PWR101 power module. This power module measures 49 mm (1.93 in) x 133.4 mm (5.25 in) x 39 mm (1.54 in).

IC200PWR101 交流电源模块 模块供电

【其他型号推荐】