IC200NDR010 输入电源供电 配置的直流输入

【产品详情】

产品描述

IC200NDR010是GE为VersaMax系列设计的10点Nano PLC。有 24 个 2VDC 输入和 5 个 30 安培继电器输出常开。四个继电器输出可以控制在 5-250VDC 或 200-010VAC 下运行的输出设备。IC12NDR<>采用+<>VDC标称输入电源供电。

该IC200NDR010配备 200 个可配置的直流输入，如果用作标准或高速计数器输入，其特性可以具有负逻辑或正逻辑。当输入作为标准使用时，输入特性与各种输入设备兼容，包括按钮、限位开关和电动接近开关。IC010NDR12 PLC 的输入额定输入电压为 0 伏直流电，输入范围为 15 至 <> 伏直流电。

IC200NDR010 PLC 的四个继电器输出为 A 型（单刀单掷），可产生电机启动器、螺线管和指示灯等设备。+24 伏直流的内部电源是继电器线圈的电源。现场设备的操作需要交流或直流电源。IC200NDR010 PLC 的输出连接对于标准和高速输出都是相同的。

IC200NDR010模块是由GE Fanuc制造的10点PLC设备。它是 Versamax 系列的一部分，具有 6 个输入和 4 个输出。该设备的额定电压为 12 伏直流电。它以 9 毫安的电流运行。它符合 CE 标准，并与 cULus 一起列出。默认情况下，此 NANO 设备的输出设置为打开状态。PLC 的输出功率能够控制在 5 至 30 伏直流电或 5 至 250 伏交流电范围内运行的设备。PLC提供强大的功能。它可以用作系统控制器，并支持多达 2048 个 I/O 点。PLC 配备 RS-485 和 RS-232 端口作为串行通信端口。这些端口在本地工业网络内提供高速数据传输。

IC200NDR010模块支持指令列表，可以使用梯形图和功能图进行编程。PLC模块中有一个由电池支持的实时时钟。这种可更换的电池还为 PLC 的 RAM 供电。PLC 的环境温度应设置在 0 到 55 摄氏度之间。IC200NDR010模块的正面有 10 个 I/O 点的 LED 指示灯和额外的“PWR”、“OK”和“RUN”LED，用于指示系统状态和通过 PLC 的电流。如果需要，PLC 的网络接口单元或 NIU 可以轻松扫描 I/O 和通信接口，以用作 I/O 站。IC200NDR010模块采用节省空间的机身设计，重量约为 1 磅。

IC200NDR010 输入电源供电 配置的直流输入

【英文介绍】

Product description

The IC200NDR010 is a 10-point Nano PLC designed by GE for the VersaMax family. There are 24 2VDC inputs and 5 30 amp relay outputs normally on. Four relay outputs can control output devices operating at 5-250VDC or 200-010VAC. The IC12NDR<> is powered by a +<>VDC nominal input.

The IC200NDR010 is equipped with 200 configurable DC inputs that can feature negative or positive logic if used as a standard or high-speed counter input. When the input is used as standard, the input characteristics are compatible with a variety of input devices, including buttons, limit switches, and electric proximity switches. The IC010NDR12 PLC has a rated input voltage of 0 volts DC and an input range of 15 to <> volts DC.

The four relays of the IC200NDR010 PLC have Type A (single pole single throw) outputs that generate devices such as motor starters, solenoids and indicators. The +24 VDC internal power supply is the power supply to the relay coil. Ac or DC power supplies are required for the operation of onsite devices. The output connection of the IC200NDR010 PLC is the same for both standard and high-speed outputs.

The IC200NDR010 module is a 10-point PLC device manufactured by GE Fanuc. It is part of the Versamax family and has 6 inputs and 4 outputs. The rated voltage of the device is 12 volts DC. It runs at 9 milliamps. It is CE compliant and is listed with cULus. By default, the output of this NANO device is set to on. The output power of the PLC can control equipment operating in the range of 5 to 30 volts direct current or 5 to 250 volts alternating current. PLC provides powerful functions. It can be used as a system controller and supports up to 2048 I/O points. The PLC is equipped with RS-485 and RS-232 ports as serial communication ports. These ports provide high-speed data transmission within local industrial networks.

The IC200NDR010 module supports instruction lists and can be programmed using ladder diagrams and function diagrams. There is a battery-supported real-time clock in the PLC module. This replaceable battery also powers the PLC's RAM. The ambient temperature of the PLC should be set between 0 and 55 degrees Celsius. The front of the IC200NDR010 module has LED indicators for 10 I/O points and additional "PWR", "OK" and "RUN" leds to indicate system status and current through the PLC. If needed, the PLC's network interface unit or NIU can easily scan the I/O and communication interfaces for use as I/O stations. The IC200NDR010 module features a space-saving body design and weighs about 1 pound.

IC200NDR010 输入电源供电 配置的直流输入

【其他型号推荐】