GE IC200NDR001 高速计数器输入

【产品详情】

IC200NDR001是GE设计的VersaMax系列中的Nano PLC。IC200NDR001 PLC 配备 10 个离散 I/O 点。有 24 个 2VDC 输入和 5 个常开 30 安培继电器输出，可调节 5 至 250VDC 或 12 至 200VAC 输出设备。注意：IC001NDR<>需要+<>VDC标称输入功率才能运行。

IC200NDR001 PLC 的可配置直流输入可以是标准输入或高速计数器输入。使用标准或高速时，输入可以具有逻辑或负特性。当输入为标准时，其特性与按钮、限位开关和电子接近开关兼容。该IC200NDR001有六个输入，输入范围为 0-30VDC，额定输入电压为 24 伏。IC200NDR001的输入阈值电压最小值为 15VDC。

该IC200NDR001包括 24 个 A 型继电器输出，可调节各种设备，如启动器、螺线管和指示器。+200VDC内部电源为内部继电器线圈供电。对于现场设备的操作，需要外部交流或直流电源。HSC 输出和标准继电器输出的连接和规格相同。IC001NDR<>的继电器输出不需要保险丝。

GE Fanuc 的IC200NDR001控制器是一款 24 伏直流 NANO PLC 系统控制器。它带有一个通信端口。前面有一个 RJ-45 端口，用于局域网。它带有 6 个输入和 4 个输出。控制器使用 Versa Pro 1.1 版软件进行配置和编程。NANO PLC配备了用于程序存储的闪存。它一次最多可以连接 10 个 I/O 点。IC200NDR001 NANO 控制器具有多达 1280 个全局引用。控制器还具有 128 个状态位和 256 个寄存器。环境温度应设置在 0 到 55 摄氏度之间才能正常运行。

IC200NDR001 NANO 控制器具有时钟速度为 28 Mhz 的处理器。布尔运算的执行时间为 1.2 微秒。该控制器遵循 SNP、SNP X 和 RTU 从站协议。GE控制器可以使用DIN导轨进行安装。此控制器型号中没有可拆卸的端子排。IC200NDR001控制器具有调制解调器兼容性，并支持RS-485适配器的多点配置。电源保持时间为 10 毫秒。对于 1 伏直流电，NANO 控制器的浪涌电流为 30 安培。控制器中继电器的寿命为 200,000 次电气操作，负载为 2 安培。IC200NDR001电流已标有 CE 等级。它可以承受长达 15 毫秒的 11 G 冲击和 57 至 500 赫兹的振动。

GE IC200NDR001 高速计数器输入

【英文介绍】

The IC200NDR001 is a Nano PLC in the VersaMax family designed by GE. IC200NDR001 PLC is equipped with 10 discrete I/O points. There are 24 2VDC inputs and 5 normally open 30 amp relay outputs, adjustable from 5 to 250VDC or 12 to 200VAC output devices. Note: IC001NDR<> requires +<>VDC nominal input power to operate.

The configurable DC input of the IC200NDR001 PLC can be a standard input or a high-speed counter input. When using standard or high speed, the input can have logical or negative characteristics. When the input is standard, the features are compatible with buttons, limit switches, and electronic proximity switches. The IC200NDR001 has six inputs ranging from 0-30VDC with a rated input voltage of 24 volts. The minimum input threshold voltage of IC200NDR001 is 15VDC.

The IC200NDR001 includes 24 Type A relay outputs to adjust various devices such as starters, solenids and indicators. +200VDC internal power supply supplies power to the internal relay coil. An external AC or DC power supply is required for the operation of the field device. HSC outputs and standard relay outputs have the same connection and specifications. The relay output of the IC001NDR<> does not require a fuse.

GE Fanuc's IC200NDR001 controller is a 24-volt DC NANO PLC system controller. It comes with a communication port. There is an RJ-45 port on the front for LAN. It has 6 inputs and 4 outputs. The controller is configured and programmed using Versa Pro version 1.1 software. NANO PLC is equipped with flash memory for program storage. It can connect up to 10 I/O points at a time. The IC200NDR001 NANO controller has up to 1280 global references. The controller also has 128 status bits and 256 registers. The ambient temperature should be set between 0 and 55 degrees Celsius for normal operation.

The IC200NDR001 NANO controller has a processor with a clock speed of 28 Mhz. The execution time of the Boolean operation is 1.2 microseconds. The controller follows SNP, SNP X, and RTU slave protocols. GE controllers can be mounted using DIN rails. There is no detachable terminal block in this controller model. The IC200NDR001 controller has modem compatibility and supports multi-point configuration of RS-485 adapters. The power hold time is 10 milliseconds. For 1 volt DC, the NANO controller has a surge current of 30 amps. The life of the relay in the controller is 200,000 electrical operations and the load is 2 amps. IC200NDR001 current is marked with CE rating. It can withstand 11 G shocks for up to 15 milliseconds and vibrations from 57 to 500 Hz.

GE IC200NDR001 高速计数器输入

【其他型号推荐】