IC200MDL644 正/负逻辑输入模块 正逻辑输入

【产品详情】

IC200MDL644 分立式输入模块是由 GE Fanuc 设计的 5/12 伏直流 Versamax 正/负逻辑输入模块。该模块的输入既可以用作正逻辑输入，也可以用作负逻辑输入。IC200MDL644 Versamax 离散输入模块有 4 个输入组，每个组有 8 个离散输入。它可以通过可连接在公共端子和输入端子之间的输入设备接收或发送电流。建议将输入配置为负逻辑，以便与TTL器件兼容。它还提供输入响应时间配置功能以及 0 毫秒、1.0 毫秒或 7.0 毫秒的软件可配置滤波时间。

IC200MDL644 分立式输入模块适合与各种输入设备配合使用，以将数据传送到系统。接收数据的智能处理由连接到模块的CPU完成。该模块提供 0 至 15 伏直流电和 5/12 伏直流电输入电压、1.8 毫安的用户输入电流和 2.4k 欧姆的输入阻抗。用户可以将每组输入连接到正逻辑或负逻辑，并且所有组都有一个公共连接。在安装过程中，请确保断开模块的现场电源。模块的公共端子将接地。IC200MDL644 分立式输入模块具有 4.2 至 15 V DC 的导通电压和 0 至 2.6 V 的关断电压。模块操作的电源由背板提供。在 140 V 输出电压下，背板电流消耗最大为 5 毫安。

IC200MDL644 正/负逻辑输入模块 正逻辑输入

【英文介绍】

The IC200MDL644 split input module is a 5/12 volt DC Versamax positive/negative logic input module designed by GE Fanuc. The input to this module can be used as either a positive or a negative logic input. The IC200MDL644 Versamax discrete input module has 4 input groups, each with 8 discrete inputs. It can receive or send current through an input device that can be connected between the common terminal and the input terminal. It is recommended that the input be configured with negative logic for compatibility with TTL devices. It also provides input response time configuration capabilities and software configurable filtering times of 0 ms, 1.0 ms or 7.0 ms.

The IC200MDL644 discrete input module is suitable for use with various input devices to transmit data to the system. The intelligent processing of the received data is done by the CPU connected to the module. The module offers 0 to 15 volts DC and 5/12 volts DC input voltages, 1.8 MA user input current, and 2.4k ohm input impedance. Users can connect each set of inputs to either positive or negative logic, and all groups have a common connection. During the installation, ensure that the onsite power supply of the module is disconnected. The common terminals of the module will be grounded. The IC200MDL644 discrete input module has an on-voltage of 4.2 to 15 V DC and a turn-off voltage of 0 to 2.6 V. The midplane provides power for module operation. At 140 V output voltage, the backplane current consumption is up to 5 mA.

IC200MDL644 正/负逻辑输入模块 正逻辑输入

【其他型号推荐】