IC200MDL631 输入模块 支持正逻辑和负逻辑操作

【产品详情】

GE Fanuc 的 IC200MDL631 输入模块是 Versamax 系列输入模块。该模块带有 8 个隔离输入点，支持正逻辑和负逻辑操作。IC200MDL631输入模块上的输入都是相互隔离的，它们不像其他一些GE Versamax模块上的输入或输出那样分组。这些隔离输入均为离散输入。当IC200MDL631隔离式输入模块上的输入配置为作为正逻辑输入运行时，它们接收来自不同输入器件的电流，并在返回时返回。当IC200MDL631输入模块上的输入配置为负逻辑输入时，它们以与正逻辑输入相反的方式工作，它们接收来自返回的电流，然后将其返回到输入器件。

GE Fanuc Versamax IC200MDL631隔离输入模块与之交互的输入设备连接到输入端子和返回端子之间的 Versamax PLC 或可编程逻辑控制器系统。IC200MDL631输入模块的电源来自系统背板，它从 PLC 的 NIU 或 CPU 接收智能处理。该输入模块可提供 8 位最大离散输入数据。IC200MDL631输入模块上的 LED 是“OK”LED 和每个输入点的 LED。“OK”LED 让用户知道背板电源是否连接到模块，单独的输入 LED 让用户知道哪些 LED 已通电和断电。仅当背板电源连接到模块时，输入 LED 才能亮起。

IC200MDL631是GE Fanuc为Versamax系列制造的分立式输入模块。 该IC200MDL631提供 <> 个分立式远程输入，可以是正逻辑输入或负逻辑输入。这些输入接收来自返回的电流，并将返回电流返回到输入设备。它们连接在返回端子和输入端子之间。

该模块从背板接收电源以运行。CPU 或 NIU 执行所有智能流程。单独的绿色 LED 指示每个输入点的开/关状态。当模块中背板电源可用时，OK LED 会发出绿色信号。

重要的是要知道，在任何方向上，8 点模块都不需要降额。对于 16 伏直流电下的 125 点模块，也不需要降额。对于运行 16 伏直流电的 150 点模块，可以同时接通的点数取决于许多因素，包括环境温度、外部电压以及模块和 DIN 导轨的方向。

IC200MDL631 输入模块 支持正逻辑和负逻辑操作

【英文介绍】

GE Fanuc's IC200MDL631 input module is a Versamax series input module. The module has 8 isolated input points and supports both positive and negative logic operations. The inputs on the IC200MDL631 input module are isolated from each other, they are not grouped like the inputs or outputs on some other GE Versamax modules. These isolated inputs are discrete inputs. When the inputs on the IC200MDL631 isolated input module are configured to run as positive logic inputs, they receive currents from different input devices and return them on return. When the inputs on the IC200MDL631 input module are configured as negative logic inputs, they work in the opposite way to positive logic inputs, they receive the current from the return and then return it to the input device.

GE Fanuc Versamax IC200MDL631 Isolates the input module with which the input device interacts connected to the Versamax PLC or programmable logic controller system between the input terminal and the return terminal. The power supply for the IC200MDL631 input module comes from the system backplane, which receives intelligent processing from the PLC's NIU or CPU. The input module provides a maximum of 8 bits of discrete input data. The LED on the IC200MDL631 input module is the "OK" LED and the LED for each input point. An "OK" LED lets the user know if the backplane power supply is connected to the module, and a separate input LED lets the user know which leds are powered on and off. The input LED lights up only when the backplane power supply is connected to the module.

The IC200MDL631 is a discrete input module manufactured by GE Fanuc for the Versamax family. The IC200MDL631 provides <> discrete remote inputs, which can be positive or negative logic inputs. These inputs receive the current from the return and return the return current to the input device. They are connected between the return terminal and the input terminal.

The module receives power from the backplane to operate. The CPU or NIU executes all intelligent processes. A separate green LED indicates the on/off status of each input point. When the backplane power is available in the module, the OK LED will emit a green signal.

It is important to know that the 8-point module does not require derating in any direction. For 125-point modules at 16 volts DC, derating is also not required. For a 150-point module running 16 volts DC, the number of points that can be switched on at the same time depends on a number of factors, including ambient temperature, external voltage, and the orientation of the module and the DIN rail.

IC200MDL631 输入模块 支持正逻辑和负逻辑操作

【其他型号推荐】