IC200MDL331 离散输出模块 分立式输出模块

【产品详情】

IC200MDL331是 VersaMax I/O 平台的分立式输出模块。这是一款 8 通道独立隔离输出模块，能够在 120-0 VAC 的输出电压范围内和 132-47 Hz 的频率范围内提供 63 VAC 的标称输出电压。与其他分立式输出模块相比，它还提供相对较高的输出电流，因为该IC200MDL331提供 2.0 安培的最大输出电流和最小 10 mA 的电流。这使得该模块能够与具有更高电流的电气设备兼容。通常，该模块可用于为继电器线圈、指示灯、螺线管驱动设备和其他在二进制或开/关状态下运行的类似负载供电。

该IC200MDL331以前由GE智能平台制造，由于最近收购了前者，现在隶属于艾默生自动化。该 I/O 系列非常适合实现分布式 I/O 架构，消除了长距离信号电缆，显著降低了电缆成本、安装和维护成本。该模块接收控制命令，并通过本地总线接口模块提供的工业协议从中央处理器 （CPU） 发送状态数据。

该模块的通道间隔离额定连续电压为 250 VAC，连续电压为 1500 VAC，连续电压为 1 VAC，而光隔离和帧对地隔离电压也是连续 250 VAC，1500 分钟额定电压为 1 VAC。该模块从本地背板汲取最大 85 mA 的电流。该背板电源为模块电路供电，以实现功能。必须将外部 85-132 VAC、47-63 Hz 连接到模块，IC200MDL331使用该模块来产生额定输出电压tage 和电流。

GE Fanuc IC200MDL331输出模块是GE Versamax系列的隔离输出模块。它设计为在 120 伏交流电的电压下运行，该交流电压必须来自外部电源，以便可以将电源切换到模块上的负载。IC200MDL331输出模块有8个输出点，由于是隔离模块，所以所有8个输出点都是相互隔离的。从用户输入到光学逻辑和框架接地的隔离额定值为 250 伏交流电（用于连续隔离），1500 分钟隔离额定值为 1 伏交流电。IC200MDL331输出模块上没有组到组隔离，因为输入未排列成单独的组。

GE Fanuc IC200MDL331隔离式 8 点输出模块除了支持 85 伏交流电的额定电压外，还支持 132 至 47 伏交流电、63 至 120 赫兹频率的输出电压范围。最大输出电压降为 2 伏，模块的负载电流额定值为每点最小电流 10 毫安、每点最大电流 2 安培和 20 个最大浪涌电流周期为 1 安培。IC200MDL331输出模块上的 LED 是 OK LED，用于指示模块的背板电源是否存在，以及用于显示哪些输出打开或关闭的各个 LED。输出 LED 由系统逻辑供电，系统逻辑独立于模块所经历的负载条件。

IC200MDL331 离散输出模块 分立式输出模块

【英文介绍】

The IC200MDL331 is a discrete output module for the VersaMax I/O platform. It is an 8-channel independent isolated output module capable of delivering a nominal output voltage of 63 VAC in the output voltage range of 120-0 VAC and in the frequency range of 132-47 Hz. It also offers a relatively high output current compared to other discrete output modules, as the IC200MDL331 offers a maximum output current of 2.0 amps and a minimum current of 10 mA. This makes the module compatible with electrical devices with higher currents. Typically, the module can be used to power relay coils, indicator lights, solenoid drive devices, and other similar loads operating in binary or on/off states.

The IC200MDL331 was previously manufactured by GE Intelligent Platforms and is now owned by Emerson Automation due to its recent acquisition of the former. The I/O family is ideally suited to implement distributed I/O architectures, eliminating long-distance signal cables and significantly reducing cable costs, installation and maintenance costs. The module receives control commands and sends status data from the central processing unit (CPU) via an industrial protocol provided by the local bus interface module.

The module has an inter-channel isolation rating of 250 VAC for continuous voltage, 1500 VAC for continuous voltage and 1 VAC for continuous voltage, while the optical isolation and frame-to-ground isolation voltage is also 250 VAC for continuous voltage and 1 VAC for 1500 minutes. The module draws up to 85 mA of current from the local backplane. The backplane power supply supplies power to the module circuit to achieve functions. The external 85-132 VAC, 47-63 Hz must be connected to the module, which the IC200MDL331 uses to generate rated output voltage tage and current.

The GE Fanuc IC200MDL331 output module is an isolated output module of the GE Versamax family. It is designed to operate at a voltage of 120 volts AC, which must come from an external power supply so that the power can be switched to the load on the module. The IC200MDL331 output module has 8 output points, and since it is an isolated module, all 8 output points are isolated from each other. The isolation rating from user input to optical logic and frame grounding is 250 volts AC (for continuous isolation), and the isolation rating is 1 volt AC for 1500 minutes. There is no group to group isolation on the IC200MDL331 output module because the inputs are not arranged into separate groups.

The GE Fanuc IC200MDL331 isolated 8-point output module supports an output voltage range of 132 to 47 volts AC and 63 to 120 Hz frequencies in addition to a rated voltage of 85 volts AC. The maximum output voltage drop is 2 volts, and the module's load current rating is 10 mA per point minimum, 2 amps per point maximum, and 1 amp for 20 maximum inrush current periods. The LED on the IC200MDL331 output module is the OK LED, which is used to indicate whether the backplane power supply of the module is present, and the individual LED to show which outputs are turned on or off. The output LED is powered by the system logic, which is independent of the load conditions experienced by the module.

IC200MDL331 离散输出模块 分立式输出模块

【其他型号推荐】