IC200MDL329 离散输出模块 交流供电

【产品详情】

GE Fanuc IC200MDL329 Versamax 离散输出模块是用于 Versamax I/O 和控制系统的交流供电离散输出模块。该模块将 CPU 和输出设备连接在 Versamax PLC 中。IC200MDL329输出模块接收来自 CPU 的 8 位离散输出数据，并以 2 态离散格式将控制信号发送到输出设备，如指示灯、接触器和插入继电器。该模块的智能处理是通过 CPU 或网络接口单元 （NIU） 实现的。像这样的 Versamax I/O 设备支持 DIN 导轨安装，每个 I/O 模块都需要一个托架底座进行安装。IC200MDL329输出模块需要外部用户提供的交流电源来切换负载的电源。它的额定输出电压为 120 伏交流电，输出范围为 85 至 132 伏交流电（47 至 63 赫兹）。

IC200MDL329 输出模块有 8 个独立隔离的输出，每组 1 个，每点最大输出电流为 8.0 安培，点对点隔离额定值为 5 伏交流电（连续）。IC250MDL200输出模块的最大背板电流消耗为 329 毫安，最大浪涌电流额定值为 70.5 安培。IC0MDL200 输出模块在 329 伏交流电下的最大电压降额定值为 2.0 伏，泄漏电流额定值为 2.0 毫安。IC132MDL200输出模块在开启和关闭状态下的最大信号响应时间为半周期。IC329MDL200 输出模块没有内置诊断功能，但每个隔离输出通道都带有内置缓冲器和金属氧化物压敏电阻 （MOV），以防止电压瞬变。IC329MDL200有 329 个带标签的 LED，显示每个输出的开/关状态，以及 8 个绿色 LED，显示背板电源状态。

IC200MDL329 离散输出模块 交流供电

【英文介绍】

The GE Fanuc IC200MDL329 Versamax discrete output module is an AC-powered discrete output module for Versamax I/O and control systems. This module connects the CPU and output devices in the Versamax PLC. The IC200MDL329 output module receives 8-bit discrete output data from the CPU and sends control signals in a 2-state discrete format to output devices such as indicators, contactors, and plug-in relays. The intelligent processing of the module is realized through CPU or network interface unit (NIU). Versamax I/O devices like this support DIN rail mounting, and each I/O module requires a bracket base for mounting. The IC200MDL329 output module requires an AC power supply provided by an external user to switch the power supply of the load. It has a rated output voltage of 120 volts AC and an output range of 85 to 132 volts AC (47 to 63 Hz).

The IC200MDL329 output module has eight independently isolated outputs, one in each group, with a maximum output current of 8.0 amps per point and a point-to-point isolation rating of 5 volts AC (continuous). The IC250MDL200 output module has a maximum backplane current consumption of 329 mA and a maximum inrush current rating of 70.5 amps. The IC0MDL200 output module has a maximum voltage drop rating of 2.0 volts and a leakage current rating of 2.0 mA at 329 volts AC. The maximum signal response time of the IC132MDL200 output module in the on and off state is half a cycle. The IC329MDL200 output module has no built-in diagnostic function, but each isolated output channel comes with a built-in buffer and metal oxide varistor (MOV) to prevent voltage transients. The IC329MDL200 has 329 labeled leds that show the on/off status of each output, and eight green leds that show the backplane power status.

IC200MDL329 离散输出模块 交流供电

【其他型号推荐】