IC200MDL240  I/O 平台的分立式输入模块 DIN导轨安装

【产品详情】

该IC200MDL240是 VersaMax I/O 平台的分立式输入模块，以前由 GE 智能平台生产，现在由艾默生自动化制造。该模块是十六 （16） 点分立输入模块，支持正逻辑或源极接线配置。它可用于连接提供二进制或开/关信号状态的现场和电气设备，例如辅助触点、接近传感器、按钮设备、限位开关和类似设备。

该 16 点模块接受 0-132 VAC、47-63 Hz 的输入信号电压范围，标称信号电压为 120 VAC，最小导通电流为 7 mA。输入通道分为两 （2） 个，每组都有一个专用的公共通道，每个通道由八 （8） 个通道组成。它的组间隔离额定值为 250 VAC（连续）和 1500 VAC（持续 1 分钟）。同样，该模块的光隔离（即用户输入到逻辑隔离）和框架接地隔离均为 1500 VAC（持续 1 分钟）和 250 VAC（连续）。

每个通道的导通响应时间为 1 个周期（最小值），而关断响应时间为 2 毫秒（最小值）。导通状态电压为 70-132 VAC，关闭状态电压范围为 0-40 VAC。此外，导通状态电流最小值为7 mA，而关断状态电流最大值为1.5 mA。

IC200MDL240采用DIN导轨安装，支持水平和垂直方向。当模块垂直安装时，不会出现性能降额，但在 132 VAC 时会出现降额。

GE Fanuc IC200MDL240 Versamax 离散输入模块是一个 16 点离散输入模块 IC200MDL240 输入模块以 2 态信号格式（开/关或闭/开）接受来自传感器、按钮和开关的交流输入信号，并将它们发送到 CPU 模块或 NIU 模块，以 16 位离散数据格式进行智能处理。IC200MDL240输入模块采用紧凑的模块化设计，可提供应用灵活性，并节省布线和工程成本。IC200MDL240 输入模块安装在具有咬接功能的 I/O 载体底座上，支持热模块的插入和拔出以及简化的现场布线。

IC200MDL240 输入模块提供 16 个离散源输入，分为 2 组，每组 8 个输入。IC200MDL240 输入模块没有点对点隔离，但每组之间有 250 伏交流连续隔离。IC200MDL240 输入模块具有 120 伏交流电的额定电压，输入范围为 0 至 132 伏交流电。IC200MDL240 输入模块具有 70 至 132 伏交流电导通状态范围和 0 至 20 伏交流电的短关断状态范围。该模块从背板电源中汲取所有操作功率。它在 110 V 电压下的最大背板电流消耗为 5 毫安，最小导通状态额定值为 5 毫安。IC200MDL240 输入模块在 8 赫兹时具有 6.60 千欧的额定阻抗。IC200MDL240 输入模块有 16 个带标签的 LED，用于显示各个输入点的状态更新，以及一个显示背板状态的绿色 LED 指示灯。

IC200MDL240  I/O 平台的分立式输入模块 DIN导轨安装

【英文介绍】

The IC200MDL240, a discrete input module for the VersaMax I/O platform, was previously manufactured by GE Intelligent Platforms and is now manufactured by Emerson Automation. The module is a sixteen (16) discrete input module that supports either positive logic or source wiring configurations. It can be used to connect field and electrical devices that provide binary or on/off signal states, such as auxiliary contacts, proximity sensors, push button devices, limit switches and similar devices.

The 16-point module accepts input signal voltages ranging from 0-132 VAC to 47-63 Hz, with a nominal signal voltage of 120 VAC and a minimum conduction current of 7 mA. The input channels are divided into two (2), each group has a dedicated public channel, and each channel consists of eight (8) channels. It has inter-group isolation ratings of 250 VAC (continuous) and 1500 VAC (lasting 1 minute). Similarly, the module's optical isolation (i.e. user input to logical isolation) and frame ground isolation are both 1500 VAC (for 1 minute) and 250 VAC (continuous).

Each channel has a turn-on response time of 1 cycle (minimum) and a turn-off response time of 2 milliseconds (minimum). The on-state voltage is 70-132 VAC and the off state voltage range is 0-40 VAC. In addition, the minimum on-state current is 7 mA, while the maximum on-state current is 1.5 mA.

The IC200MDL240 is mounted with DIN rail and supports horizontal and vertical orientation. Performance derating does not occur when the module is installed vertically, but it does occur at 132 VAC.

The GE Fanuc IC200MDL240 Versamax discrete input module is a 16-point discrete input module The IC200MDL240 input module accepts AC input signals from sensors, buttons and switches in a 2-state signal format (on/off or off/on). They are sent to the CPU module or NIU module for intelligent processing in 16-bit discrete data format. The compact modular design of the IC200MDL240 input module provides application flexibility and saves wiring and engineering costs. The IC200MDL240 input module is mounted on the I/O carrier base with bite function, and supports hot module insertion and removal and simplified field wiring.

The IC200MDL240 input module provides 16 discrete source inputs, divided into 2 groups of 8 inputs each. The IC200MDL240 input module has no point-to-point isolation, but there is continuous 250V AC isolation between each group. The IC200MDL240 input module has a rated voltage of 120 volts AC and an input range of 0 to 132 volts AC. The IC200MDL240 input module has an on-state range of 70 to 132 volts AC and a short-off state range of 0 to 20 volts AC. The module draws all operating power from the midplane power supply. It has a maximum backplane current consumption of 5 mA at 110 V and a minimum on-state rating of 5 mA. The IC200MDL240 input module has a rated impedance of 6.60 kω at 8 Hz. The IC200MDL240 input module has 16 labeled leds that display status updates at individual input points, and a green LED indicator that shows the status of the backplane.

IC200MDL240  I/O 平台的分立式输入模块 DIN导轨安装

【其他型号推荐】