IC200MDL140 交流输入模块 该模块接收来自传感器

【产品详情】

GE Fanuc IC200MDL140 Versamax 交流输入模块是属于 Versamax 模块化 I/O 和控制系统的 8 点离散输入模块。该模块接收来自传感器、按钮和开关的 2 态交流信号，并将这些信号作为 8 位离散输入返回给 CPU。IC200MDL140输入模块的输入排列在一组 8 个输入中，每个输入点可作为正逻辑输入或源出离散输入。IC200MDL140 输入模块使用 I/O 基本托架安装在 Versamax 背板上。Versamax I/O 基座托架具有插入端子和卡入式设计，可提供最大的接线灵活性，并支持热模块的插入和拔出。

IC200MDL140 是 VersaMax 交流输入模块。 该分立式输入模块具有正逻辑或源极型输入。这意味着它们将从交流输入设备接收电流，然后返回公共端的电流。为此，输入设备连接在输入端子和公共端子之间。

该IC200MDL140提供一组 <> 个离散输入。该模块的电源来自背板，智能处理由 CPU 或 NIU 执行。每个模块都标配 LED 指示灯，用于指示输入上每个点的开/关状态，以及用于背板电源的 OK 指示灯。

安装前，用户应仔细检查IC200MDL140模块的所有部件。如果发现损坏，应更换零件。将损坏的单元放入 CPU 中可能会产生更多问题。此外，不正确的热插入会影响同一背板上其他模块的性能。无论方向如何，8 点模块都不需要降额。对于隔离，用户对逻辑和框架接地的输入为250 VAC连续或1500 VAC一分钟。该模块的输入电压为 0 至 132 VAC，标称值为 120 VAC。同样重要的是要注意，该模块具有爆炸危险，不应更换任何组件。

与 Versamax 输出模块不同，IC200MDL140 输入模块和每个 Versamax 输入模块都从背板获取电源，不需要外部电源。IC200MDL140 输入模块的额定电压为 120 伏交流电，工作范围在 0 至 132 伏交流电之间。该模块具有 70 至 132 伏交流电的通态电压范围和 0 至 20 伏的交流电关断状态范围。IC200MDL140 输入模块的最大背板额定电流为 55 毫安（5 伏时），8 赫兹时的输入阻抗为 6.60 千欧姆。IC200MDL140 输入模块有 8 个非隔离的离散输入，排列在一组 8 个输入通道中。它有 16 个单独编号的 LED，用于指示每个输入通道的开/关状态，以及 1 个 LED，用于指示背板电源状态。IC200MDL140 输入模块可以安装在合适的 Versamax I/O 托架上，其尺寸约为 110 x 66.8 x 50.0 毫米（4.3 x 2.63 x 1.956 英寸）。

IC200MDL140 交流输入模块 该模块接收来自传感器

【英文介绍】

The GE Fanuc IC200MDL140 Versamax AC input module is an 8-point discrete input module for the Versamax modular I/O and control system. The module receives 2-state AC signals from sensors, buttons, and switches and returns these signals to the CPU as 8-bit discrete inputs. The inputs of the IC200MDL140 input module are arranged in a set of 8 inputs, and each input point can be used as a positive logic input or a source discrete input. The IC200MDL140 input module is mounted on the Versamax backplane using the I/O base bracket. The Versamax I/O pedestal bracket has insertion terminals and snap-in design for maximum wiring flexibility and support for hot module insertion and removal.

The IC200MDL140 is the VersaMax AC input module. The separate input module has positive logic or source type input. This means that they will receive current from the AC input device and then return the current to the common end. For this purpose, the input device is connected between the input terminal and the common terminal.

The IC200MDL140 provides a set of <> discrete inputs. The power supply of the module comes from the backplane, and intelligent processing is performed by the CPU or NIU. Each module comes standard with an LED indicator indicating the on/off status of each point on the input, as well as an OK indicator for the backplane power supply.

Before installation, you should carefully check all components of the IC200MDL140 module. If damage is found, parts should be replaced. Putting a broken unit into the CPU can create more problems. In addition, incorrect hot insertion can affect the performance of other modules on the same backplane. Regardless of direction, the 8-point module does not require derating. For isolation, the user's input to the logic and frame grounding is 250 VAC continuously or 1500 VAC for one minute. The input voltage of the module is 0 to 132 VAC and the nominal value is 120 VAC. It is also important to note that this module is an explosion hazard and no components should be replaced.

Unlike the Versamax output module, the IC200MDL140 input module and each Versamax input module draw power from the backplane and do not require an external power supply. The IC200MDL140 input module is rated at 120 volts AC and operates between 0 and 132 volts AC. The module has an on-state voltage range of 70 to 132 volts AC and an off state range of 0 to 20 volts AC. The IC200MDL140 input module has a maximum backplane current rating of 55 mA (5 V h) and an input impedance of 6.60 kohms at 8 Hz. The IC200MDL140 input module has eight non-isolated discrete inputs arranged in a set of eight input channels. It has 16 individually numbered leds to indicate the on/off status of each input channel, and 1 LED to indicate the backplane power status. The IC200MDL140 input module can be mounted on a suitable Versamax I/O carrier and measures approximately 110 x 66.8 x 50.0 mm (4.3 x 2.63 x 1.956 inches).

IC200MDL140 交流输入模块 该模块接收来自传感器

【其他型号推荐】