IC200MDD844 分立式混合输入和输出模块 提供正直流电压

【产品详情】

该IC200MDD844由通用电气制造，是 VersaMax 系列的一部分，是一款分立式混合输入和输出模块。 该模块总共提供 32 个输入和输出点。这些点分为三组，其中一组包含 16 个输出，而其他两组各包含 12 个输入。该模块的所有输出点均为正逻辑或源极类型，这意味着这些点为负载提供正直流电压。该器件的所有输入点均为正逻辑，这意味着它们从连接的器件中获取电流并将其返回到公共线。该模块还支持负逻辑和 200 电压输出;但是，这将需要升级到IC844MDD<>C或更好的版本。

该模块在其基本配置中具有 0.5 毫秒的输入开/关响应时间。为了在干扰过大或开关触点弹跳的环境中提高性能，该IC200MDD844支持额外的输入滤波器，这将改变响应时间。这些筛选器包括：1 毫秒、5 毫秒或 <> 毫秒。默认筛选时间为 <> 毫秒。注意：这些过滤器时间将添加到基本配置输入响应时间中，这意味着使用默认过滤器时的总响应时间为<>.<>毫秒。

 GE Fanuc IC200MDD844 分立式混合 I/O 模块在基本配置中具有 0.5 毫秒的输入开/关响应时间。为了在开关触点弹跳或干扰过大的环境中提高性能，IC200MDD844模块支持额外的输入滤波器，从而改变响应时间。筛选器包括 0、1 或 7 毫秒筛选器，默认筛选时间为 1 毫秒。当此模块连接到额定电压为 5 伏的背板电源时，它消耗的总电流为 70 毫安。它的输入电压范围为 0 至 30 伏，而输出电压范围为 10.2 至 30 伏，每个输出点的 0 伏电源电流为 5.30 安培。

当连接到 5v 背板时，该模块最大消耗 70 毫安的电流。输入阻抗的最大额定值为 10 kOhms。输入电压范围为 0 至 30 伏。输出电压范围为 10.2 至 30 V。对于 0 伏，每个点的负载电流为 5.30 安培。

IC200MDD844 分立式混合输入和输出模块 提供正直流电压

【英文介绍】

The IC200MDD844, manufactured by General Electric and part of the VersaMax family, is a separate hybrid input and output module. The module provides a total of 32 input and output points. The points were divided into three groups, one of which contained 16 outputs, while the other two groups each contained 12 inputs. All output points of this module are of positive logic or source type, which means that these points provide a straight current voltage to the load. All of the input points of the device are positive logic, meaning they take current from the connected device and return it to the common line. The module also supports negative logic and 200 voltage output; However, this will require an upgrade to IC844MDD<>C or better.

The module has an input on/off response time of 0.5 ms in its basic configuration. To improve performance in environments where interference is excessive or switching contacts bounce, the IC200MDD844 supports additional input filters, which will vary response time. These filters include: 1 ms, 5 ms, or <> ms. The default filtering time is <> milliseconds. Note: These filter times are added to the basic configuration input response time, which means that the total response time when the default filter is used is <>.<> milliseconds.

The GE Fanuc IC200MDD844 split hybrid I/O module has an input on/off response time of 0.5 ms in a basic configuration. To improve performance in environments where switching contacts bounce or interfere too much, the IC200MDD844 module supports additional input filters that vary response times. Filters include 0, 1, or 7 millisecond filters, with a default filter time of 1 millisecond. When this module is connected to a backplane power supply rated at 5 volts, it consumes a total current of 70 mA. It has an input voltage range of 0 to 30 volts and an output voltage range of 10.2 to 30 volts, with a 0 volt supply current of 5.30 amps per output point.

When connected to the 5v backplane, the module consumes a maximum of 70 mah of current. The maximum rated input impedance is 10 kOhms. Input voltage range is 0 to 30 volts. The output voltage ranges from 10.2 to 30 V. For 0 volts, the load current at each point is 5.30 amps.

IC200MDD844 分立式混合输入和输出模块 提供正直流电压

【其他型号推荐】