IC200EBI001 以太网网络接口单元  分布式 I/O 架构

【产品详情】

IC200EBI001是 VersaMax 系列的以太网网络接口单元 （ENIU），由 GE Fanuc（现为 Emerson Automation）制造。该模块的主要功能是通过以太网连接I/O模块，并充当托管I/O模块的本地控制器。这允许实现分布式 I/O 架构。

该IC200EBI001在两 （2） 个版本中可用。模块版本 1.0 支持安装多达 8 个 I/O 模块，但不支持扩展机架，但是，模块版本 1.1 及更高版本的模块最多可支持 64 个 I/O，并允许安装多达 7 个扩展机架。它支持高达 1024 字节的 I/O，其中可配置多达 512 字节的输入和 512 字节的输出，以及总计 128 字节的故障数据。

可以为IC200EBI001分配任何有效的 IP 地址，具体取决于此模块将加入的网络。模块的默认 IP 地址为 195.0.0.x，x 表示旋转开关分配的位置。对于 IP 地址的配置，提供的标记为 X3、X1 和 X10 的三 （100） 个旋转开关设置为向该模块提供 IP 地址。或者，可以使用 DOS 命令提示符和 arp-s 命令来定义 IP 地址。

该IC200EBI001提供单个以太网通信接口，支持 10/100 mbps 传输速度和自动协商功能。该模块带有模块 LED 状态指示灯，例如 PWR、OK 和 FAULTS。还嵌入了通信 LED 状态指示灯，例如 LAN 和 STAT。 IC200EBI001以太网网络接口单元 （ENIU） 是 GE 智能平台/GE Fanuc 的产品，是 Versamax 系列的一部分。

ENIU 被归类为以太网从站模块，用作一组输入和输出模块的控制器。GE Fanuc IC200EBI001单元要求将电源直接安装在其上。它具有 5 个 LED 指示灯，用于显示模块及其组件的状态。该模块最好的一点是其简单明了的安装过程，操作员只需将设备卡入到位即可。安装此以太网网络接口单元的电源时，闩锁应处于解锁位置。此外，所有连接器以及闩锁柱都需要对齐。按下电源模块并将 2 个卡舌卡入到位后，闩锁需要处于锁定位置，以增强电源的安全性。

IC200EBI001 以太网网络接口单元  分布式 I/O 架构

【英文介绍】

The IC200EBI001 is the Ethernet Network Interface Unit (ENIU) of the VersaMax family, manufactured by GE Fanuc (now Emerson Automation). The main function of the module is to connect the I/O module via Ethernet and act as a local controller for hosting the I/O module. This allows for a distributed I/O architecture.

The IC200EBI001 is available in two (2) versions. Module version 1.0 supports the installation of up to 8 I/O modules but does not support expansion racks, however, modules in module version 1.1 and later support up to 64 I/ OS and allow the installation of up to 7 expansion racks. It supports up to 1024 bytes of I/O, which can be configured with up to 512 bytes of input and 512 bytes of output, and a total of 128 bytes of fault data.

IC200EBI001 can be assigned any valid IP address, depending on the network that this module will join. The default IP address of the module is 195.0.0.x, where x indicates the location assigned by the rotary switch. For the configuration of IP addresses, the three (100) rotary switches provided, labeled X3, X1, and X10, are set to provide IP addresses to this module. Alternatively, you can use the DOS command prompt and the arp-s command to define the IP address.

The IC200EBI001 provides a single Ethernet communication interface with 10/100 mbps transmission speeds and auto-negotiation capabilities. The module has module LED status indicators such as PWR, OK and FAULTS. Communication LED status indicators such as LAN and STAT are also embedded. The IC200EBI001 Ethernet Network Interface Unit (ENIU) is a product of GE Intelligent Platform /GE Fanuc and is part of the Versamax family.

The ENIU is classified as an Ethernet slave module and is used as a controller for a set of input and output modules. The GE Fanuc IC200EBI001 unit requires the power supply to be installed directly on it. It has 5 LED indicators to show the status of the module and its components. The best thing about the module is its straightforward installation process, where the operator simply snaps the device into place. When installing the power supply for this Ethernet network interface unit, the latch should be in the unlocked position. In addition, all connectors and latch posts need to be aligned. After pressing the power module and clamping the two latches into place, the latch must be locked to enhance the security of the power supply.

IC200EBI001 以太网网络接口单元  分布式 I/O 架构

【其他型号推荐】