IC200CPU005 CPU模块 无需使用串行端口转换

【产品详情】

IC200CPU005 CPU 是具有用户可配置内存的 CPU。它由 GE Fanuc 为 Versamax 系列制造。它设计有用于内部网络的 RS-232 和 RS-485 串行端口。通过使用串口，可以将CPU连接到编程器或个人计算机进行配置。CPU 一次最多可以处理 64 个模块，最多 2048 个输入和输出点。它的布尔执行速度为 0.8 m sec/k。IC200CPU005 CPU 采用小尺寸设计。CPU 宽 4.20 英寸，长 5.04 英寸，深 2.72 英寸。CPU 以 35 至 135 毫安的背板电流运行 5 伏电源。它有一个开放的外壳，应远离喷水。

IC200CPU005 CPU 已通过包括 CE 在内的不同标准认证。它在 35 伏输出电压下总共消耗 5 毫安，而无需使用串行端口转换器。使用转换器时，它消耗 135 毫安的电流和 5 伏输出电压。DIN导轨安装底座用于安装CPU模块。IC200CPU005 CPU 配备了一个可拆卸电池，用于为 RAM 和实时时钟供电。实时时钟在操作期间存储不同的时间事件。CPU 应正确接地，以保护其免受电气损坏。IC200CPU005 CPU 采用对流冷却方式进行冷却，因此流向 CPU 模块的气流不应受到阻碍。

IC200CPU005是GE为Versamax系列设计的CPU。该IC200CPU005具有两个串行端口，并拥有 64 KB 的可配置存储器。IC200CPU005可以自动配置，也可以使用软件手动配置。

该IC200CPU005支持 64 个模块，范围高达 2048 个 I/O 点。CPU设计有RUN/STOP开关，并具有浮点数据功能。IC200CPU005背板的电流消耗为5V输出：35mA（不带串口转换器或EZ程序存储设备），输出5V：135mA（带串口转换器或EZ程序存储设备）。

将IC200CPU005安装在DIN导轨上时，CPU和连接器必须安装在35mm x 7.5mm DIN导轨的同一部分上。导轨上的饰面不应涂漆，必须接地以保护 EMC。安装 DIN 导轨时，螺钉应间隔约 6 英寸以确保稳定性。IC200CPU005可轻松卡入DIN导轨上，无需工具即可安装或接地到DIN导轨。

IC200CPU005  CPU模块 无需使用串行端口转换

【英文介绍】

The IC200CPU005 CPU is a CPU with user-configurable memory. It was manufactured by GE Fanuc for the Versamax family. It is designed with RS-232 and RS-485 serial ports for internal networking. By using a serial port, the CPU can be connected to a programmer or a personal computer for configuration. The CPU can process up to 64 modules at a time and up to 2048 input and output points. It has a Boolean execution speed of 0.8 m sec/k. The IC200CPU005 CPU is designed with a small size. The CPU is 4.20 inches wide, 5.04 inches long, and 2.72 inches deep. The CPU runs a 5-volt power supply with a backplane current of 35 to 135 mA. It has an open shell and should be kept away from water spray.

The IC200CPU005 CPU has been certified by different standards, including CE. It consumes a total of 5 MA at 35 volts of output voltage without the use of a serial port converter. When using the converter, it consumes 135 mA of current and 5 volts of output voltage. DIN rail mounting base is used to mount the CPU module. The IC200CPU005 CPU is equipped with a removable battery to power the RAM and real-time clock. The real-time clock stores different time events during an operation. The CPU should be properly grounded to protect it from electrical damage. The IC200CPU005 CPU is cooled by convection cooling, so the airflow to the CPU module should not be hindered.

The IC200CPU005 is a CPU designed by GE for the Versamax family. The IC200CPU005 has two serial ports and 64 KB of configurable memory. The IC200CPU005 can be configured automatically or manually using software.

The IC200CPU005 supports 64 modules with a range of up to 2048 I/O points. The CPU is designed with a RUN/STOP switch and a floating-point data function. The current consumption of the IC200CPU005 backplane is 5V output: 35mA (without serial converter or EZ program storage device) and 5V output: 135mA (with serial converter or EZ program storage device).

When mounting the IC200CPU005 on a DIN rail, the CPU and connector must be mounted on the same part of the 35mm x 7.5mm DIN rail. The finish on the guide rail should not be painted and must be grounded to protect the EMC. When installing DIN rails, screws should be spaced approximately 6 inches apart to ensure stability. The IC200CPU005 easily snaps into the DIN rail and can be installed or grounded to the DIN rail without tools.

IC200CPU005  CPU模块 无需使用串行端口转换

【其他型号推荐】