IC200CPU001 紧凑型控制器 DIN导轨或面板安装

【产品详情】

该IC200CPU001是艾默生自动化 VersaMax 系列的紧凑型控制器，前身为 GE 智能平台 （GE IP）。这是一款DIN导轨或面板安装的中央处理器（CPU）模块，能够处理多达2048个离散输入、2048个离散输出和34 KB的存储器，可分配给用户程序、模拟输入和模拟输出数据以及内部寄存器。该 CPU 还配备了 1024 点离散内部位、256 点离散临时位和 1280 点全局离散位。

IC200CPU001具有 1.8 ms / K 的典型布尔执行速度。它支持浮点数学计算和数据处理、覆盖功能，并配有电池备份的实时时钟 （RTC），精度为 100ppm （0.01%） 或 +/- 9 秒/天，适用于内部定时器和计数器指令，精度为 23ppm （.0023%） 或 +/- 2 秒/天 @ 30C;100 ppm （（0.01%） 或 +/- 9 秒/天 @ 全温度范围，适用于逻辑调度或基于调度的逻辑序列。

IC200CPU001可用的集成通信端口是一 （1） 个 RS232 和一 （1） 个 RS485 通信接口。这些接口支持多种工业通信协议，如SNP从站、RTU从站和串行I/O，可用于实现分布式I/O架构、人机界面（HMI）、监控和数据采集（SCADA）系统以及其他适用和兼容的合作伙伴设备之间的数据交换。这些 CPU 模块使用 CIMPLICITY Machine Edition Logic Developer、VersaPro 或 Control programmer 进行配置。

IC200CPU001 CPU 是由 GE Fanuc 制造的用户可配置 CPU。它带有 2 个串行端口和 34 KB 的可配置内存。CPU 使用非易失性存储器来存储程序。它支持梯形图和指令列表中的编程。它带有 1024 个分立内部位点和 256 个临时位点。CPU 的全局离散位包括 1280 个点。CPU 的布尔执行速度为 1.8 ms/K。IC200CPU001 CPU 支持浮点和覆盖。CPU 配备内置 RS-232 和 RS-485 端口。对于内部通信，CPU 使用 SNP 从站和串行 I/O 协议。CPU的内存是电池供电的，并具有实时时钟。时钟时间戳在操作期间对关键时间事件进行标记。在整个温度范围内，如果为100 ppm，则实时时钟精度。

GE Fanuc Versamax IC200CPU001 CPU 可以通过使用DIN导轨和电源轻松安装。IC200CPU001 CPU 设计有 32 个 modbus 寄存器、增强的 PID 功能块和比其他 CPU 更高的通信输出。CPU 的背板额定电流消耗为 140 毫安（5 伏）和 100 毫安（3.3 伏）。正面有用于不同系统事件的 LED 指示灯。IC200CPU001 CPU 的串行端口可由用户使用软件进行配置。这些端口可以在需要时在 RTU 和 SNP 从模式之间自动切换。CPU 运行/停止模式开关位于模块门后面的正面。它用于启动或停止 CPU。

IC200CPU001 紧凑型控制器 DIN导轨或面板安装

【英文介绍】

The IC200CPU001 is a compact controller in Emerson Automation's VersaMax family, formerly known as GE Intelligence Platform (GE IP). It is a DIN rail or panel mounted central processing unit (CPU) module capable of handling up to 2048 discrete inputs, 2048 discrete outputs, and 34 KB of memory that can be allocated to user programs, analog input and analog output data, and internal registers. The CPU is also equipped with 1024-point discrete internal bits, 256-point discrete temporary bits, and 1280-point global discrete bits.

The IC200CPU001 has a typical Boolean execution speed of 1.8 ms/K. It supports floating-point math calculations and data processing, overwriting capabilities, and comes with a battery-backed real-time clock (RTC) with an accuracy of 100ppm (0.01%) or +/ -9 seconds/day for internal timer and counter instructions. Accuracy of 23ppm (.0023%) or +/- 2 seconds/day @ 30C; 100 ppm ((0.01%) or +/- 9 seconds/day @ full temperature range for logical scheduling or scheduling-based logic sequences.

The available integrated communication ports for IC200CPU001 are one (1) RS232 and one (1) RS485 communication interface. These interfaces support a variety of industrial communication protocols, such as SNP slave, RTU slave, and serial I/O, and can be used to enable data exchange between distributed I/O architectures, human machine interfaces (HMI), supervisory control and data acquisition (SCADA) systems, and other applicable and compatible partner devices. These CPU modules are configured using CIMPLICITY Machine Edition Logic Developer, VersaPro, or Control programmer.

The IC200CPU001 CPU is a user-configurable CPU manufactured by GE Fanuc. It comes with 2 serial ports and 34 KB of configurable memory. The CPU uses non-volatile memory to store programs. It supports programming in ladder diagrams and instruction lists. It has 1024 discrete internal sites and 256 temporary sites. The CPU's global discrete bits consist of 1280 points. The CPU has a Boolean execution speed of 1.8 ms/K. IC200CPU001 CPU supports floating point and overlay. The CPU comes with built-in RS-232 and RS-485 ports. For internal communication, the CPU uses SNP slave and serial I/O protocols. The CPU's memory is battery powered and has a real-time clock. Clock timestamps mark critical time events during an operation. Over the entire temperature range, if 100 ppm, real-time clock accuracy.

The GE Fanuc Versamax IC200CPU001 CPU can be easily installed by using DIN rails and power supplies. The IC200CPU001 CPU is designed with 32 modbus registers, an enhanced PID block, and a higher communication output than other cpus. The CPU's backplane has rated current consumption of 140 mA (5 volts) and 100 MA (3.3 volts). There are LED indicators on the front for different system events. The serial port of the IC200CPU001 CPU can be configured by the user using software. These ports can automatically switch between RTU and SNP slave modes when needed. The CPU run/Stop mode switch is located on the front behind the module door. It is used to start or stop the CPU.

IC200CPU001 紧凑型控制器 DIN导轨或面板安装

【其他型号推荐】