IC200CHS112 GE Fanuc 的继电器式插入式 I/O 端子扩展底座

【产品详情】

Versamax IC200CHS112底座是 GE Fanuc 的继电器式插入式 I/O 端子扩展底座。IC200CHS112座上使用的继电器具有以下特性：最大接触电阻为 30 毫欧姆，最长设定时间为 15 毫秒，直流电压最大释放时间为 5 毫秒，交流电压最大释放时间为 10 毫秒tage，最大机械工作频率为每小时 18000 次操作， 最大电气工作频率为每小时 1800 次操作，绝缘电阻为 1000 兆欧姆，最低机械预期寿命为 20 万次操作，最低电气预期寿命为 100,000 次操作，-40 至 70 摄氏度工作温度范围无冰，-40 至 70 存储温度范围无冰， 工作相对湿度范围为 35% 至 85%，存储相对湿度范围为 35% 至 85%。

IC200CHS112底座上的继电器是单极设备，在 100 伏直流电下最小额定负载为 5 毫安，感性负载的最大开关功率为 120 瓦和 1500 VA，电阻负载的最大开关功率为 240 瓦和 2000 VA，最大开关电流为 8 安培，承载电流最大为 8 安培。IC200CHS112底座上的继电器线圈的电源由额定电压为 24 伏直流的外部电源供电。IC17CHS18底座上的端子编号 B200 和 B112 用于连接到此电源。IC200CHS112基座上的继电器由 Versamax 输出模块控制，包括 IC200MDL740 和 IC200MDL750 模块。IC200CHS112底座设计用于 17 点IC32MDL32模块的第 200 至 750 点。IC50CHS200底座上有 112 个盒式端子，用于现场 I/O 接线和电源连接。IC200CHS112底座包括一根带状电缆，用于连接到主底座。

IC200CHS112 GE Fanuc 的继电器式插入式 I/O 端子扩展底座

【英文介绍】

The Versamax IC200CHS112 base is GE Fanuc's relay plug-in I/O terminal expansion base. The relays used on IC200CHS112 have the following characteristics: The maximum contact resistance is 30 milliohm, the maximum setting time is 15 ms, the maximum DC voltage release time is 5 ms, the maximum AC voltage release time is 10 ms tage, the maximum mechanical operating frequency is 18,000 operations per hour, the maximum electrical operating frequency is 1800 operations per hour, and the maximum DC voltage release time is 10 ms TAGE. Insulation resistance of 1000 megaohms, minimum mechanical life expectancy of 200,000 operations, minimum electrical life expectancy of 100,000 operations, ice-free operating temperature range of -40 to 70 degrees Celsius, ice-free storage temperature range of -40 to 70 degrees Celsius, operating relative humidity range of 35% to 85%, Storage relative humidity ranges from 35% to 85%.

The relays on the IC200CHS112 base are unipolar devices with a minimum rated load of 5 mA at 100 volts DC, a maximum switching power of 120 watts and 1500 VA at inductive loads, a maximum switching power of 240 Watts and 2000 VA at resistive loads, and a maximum switching current of 8 amps. The maximum carrying current is 8 amps. The relay coil on the IC200CHS112 base is powered by an external power supply rated at 24 volts DC. The terminal numbers B200 and B112 on the IC17CHS18 base are used to connect to this power supply. The relays on the IC200CHS112 base are controlled by Versamax output modules, including the IC200MDL740 and IC200MDL750 modules. The IC200CHS112 base is designed for the 200th to 750th points of the 17-point IC32MDL32 module. The IC50CHS200 base has 112 box terminals for field I/O wiring and power connections. The IC200CHS112 base includes a ribbon cable for connecting to the main base.

IC200CHS112 GE Fanuc 的继电器式插入式 I/O 端子扩展底座

【其他型号推荐】