IC200CHS014  I/O 插入盒式热电偶冷端补偿

【产品详情】

IC200CHS014是 GE Fanuc 为其 Versamax 系列制造的 I/O 插入盒式热电偶冷端补偿。 该IC200CHS014用作接口，并配有一个连接器，用于连接连接器式 I/O 载体和 36 个盒式端子的电缆。该IC200CHS014为热电偶输入测量提供局部冷端补偿。

IC200CHS014有一个透明的保护铰链门，覆盖接线端子。本机中的每个 I/O 模块都配有一块板，可以折叠并插入此门中。

有两种安装IC200CHS014的方法。它可以安装在与连接器式 I/O 托架相同的 DIN 导轨上，也可以安装在单独的 DIN 导轨上。无论哪种方式都需要最大的抗机械振动和冲击能力;因此，该装置也必须安装在面板上。DIN 导轨应使用间隔约 6 英寸（5.24 厘米）的螺钉安装在面板上。

建议在站的两端安装 DIN 导轨夹，以帮助将IC200CHS014锁定到正确的位置。推荐的 clamp 本机被编为IC200ACC313。在这种情况下，DIN导轨必须电气接地，以提供EMC保护。

IC200CHS014  I/O 插入盒式热电偶冷端补偿

【英文介绍】

The IC200CHS014 is an I/O plug-in box thermocouple cold end compensation manufactured by GE Fanuc for its Versamax series. The IC200CHS014 is used as an interface and is equipped with a connector for connecting a connector type I/O carrier and a cable with 36 box terminals. The IC200CHS014 provides local cold end compensation for thermocouple input measurements.

The IC200CHS014 has a transparent protective hinged door that covers the terminal. Each I/O module in the unit is equipped with a board that can be folded and inserted into this gate.

There are two methods for installing the IC200CHS014. It can be mounted on the same DIN rail as the connector type I/O bracket or on a separate DIN rail. Either way, maximum resistance to mechanical vibration and shock is required; Therefore, the device must also be mounted on the panel. DIN rails should be mounted to the panel using screws spaced approximately 6 inches (5.24 cm) apart.

It is recommended to install DIN rail clamps at both ends of the station to help lock the IC200CHS014 into the correct position. The recommended clamp machine is coded as IC200ACC313. In this case, the DIN rail must be electrically grounded to provide EMC protection.

IC200CHS014  I/O 插入盒式热电偶冷端补偿

【其他型号推荐】