IC200CHS012 盒式插入式 I/O 端子 DIN导轨

【产品详情】

GE Fanuc Versamax IC200CHS012 端子是盒式插入式 I/O 端子。IC200CHS012端子的用途是作为现场接线和连接器式 I/O 端子之间的接口。IC200CHS012端子具有 36 个盒式端子和一个用于连接连接器式 I/O 载体的连接器。需要一根电缆将连接器式 I/O 托架连接到IC200CHS012端子上的连接器。IC200CHS012端子尺寸为 4.35 x 4.15 英寸。建议将铜线用于 36 盒式端子的端接。可以使用实心线或绞合线。如果使用单根电线，它可以具有 AWG #14 到 AWG #22 的导体尺寸。如果使用 2 根电线，那么它们可以具有最大导体尺寸的 AWG #18。

如果需要确保防止机械冲击和振动，建议将IC200CHS012端子安装在面板上。IC200CHS012端子可轻松安装到DIN导轨上，IC200CHS012端子可以安装在单独的DIN导轨上，也可以安装在与连接器式I/O载体相同的DIN导轨上。Versamax 解决方案支持 DIN 导轨安装，每个机架最多 8 个 I/O 和选件模块，每个 Versamax PLC 或 Versamax I/O 站系统最多 8 个机架。Versamax I/O 模块的深度为 70 毫米，占地面积小，安装方便，节省空间。IC200CHS012端子的工作温度范围为-40至60摄氏度。在运输和储存过程中，IC200CHS012端子周围的环境温度应保持在-40至85摄氏度之间。IC200CHS012终端附近的非冷凝相对湿度水平应在 5% 到 95% 之间。

IC200CHS012是GE Fanuc为Versamax系列制造的盒式插入输入输出端子。它重 1.00 磅。该特殊载体与IC200CHS003底座和连接电缆 IC200CBL1xxx 配合使用。连接电缆用于连接连接器式输入/输出载体和 36 个盒式端子。

该装置最突出的特点之一是覆盖所有接线端子的透明保护铰链门和每个 I/O 模块随附的板，该板可以折叠并插入该门中。该IC200CHS012的最大电流水平为每点 2 安培或每个接地和电源 8 安培。电压范围不应超过 264 伏交流电，低于 300 伏交流电的电涌不会损坏此特定载波。必要时，可以添加额外的辅助输入输出端子排，以提供额外的现场接线连接。辅助输入/输出端子条直接插入IC200CHS012的下边缘。

IC200CHS012单元可以安装在与连接器式 I/O 载体相同的 DIN 导轨上，也可以安装在单独的 DIN 导轨上。对于那些需要最大抗冲击和机械振动的应用，IC200CHS012输入/输出端子单元必须安装在面板上。

IC200CHS012 盒式插入式 I/O 端子 DIN导轨

【英文介绍】

The GE Fanuc Versamax IC200CHS012 terminal is a box insert I/O terminal. The IC200CHS012 terminal is intended as an interface between field wiring and connector type I/O terminals. The IC200CHS012 terminal has 36 box terminals and one connector for connecting connector type I/O carriers. A cable is required to connect the connector type I/O bracket to the connector on the IC200CHS012 terminal. The IC200CHS012 terminal measures 4.35 x 4.15 inches. It is recommended that the copper wire be used for terminating the 36 box terminals. Solid wire or twisted wire can be used. If a single wire is used, it can have conductor sizes from AWG #14 to AWG #22. If 2 wires are used, then they can have AWG #18 of the maximum conductor size.

To prevent mechanical shock and vibration, you are advised to install the IC200CHS012 terminal on the panel. The IC200CHS012 terminal can be easily mounted to the DIN rail, and the IC200CHS012 terminal can be mounted on a separate DIN rail or on the same DIN rail as the connector type I/O carrier. The Versamax solution supports DIN rail mounting with up to 8 I/O and option modules per rack and up to 8 racks per Versamax PLC or Versamax I/O station system. With a depth of 70 mm, the Versamax I/O modules have a small footprint and are easy to install and save space. The operating temperature range of the IC200CHS012 terminal is -40 to 60 degrees Celsius. During transportation and storage, the ambient temperature around the IC200CHS012 terminal should be maintained between -40 and 85 degrees Celsius. The non-condensing relative humidity level near the IC200CHS012 terminal should be between 5% and 95%.

The IC200CHS012 is a boxed plug-in input/output terminal manufactured by GE Fanuc for the Versamax family. It weighs 1.00 pounds. The special carrier is used with the IC200CHS003 base and the connection cable IC200CBL1xxx. Connection cables are used to connect connector type input/output carriers and 36 box terminals.

One of the most prominent features of the unit is the transparent protective hinged door that covers all terminal blocks and the board that comes with each I/O module, which can be folded and inserted into the door. The IC200CHS012 has a maximum current level of 2 amps per point or 8 amps per ground and power supply. The voltage range should not exceed 264 volts AC, and surges below 300 volts AC will not damage this particular carrier. If necessary, additional auxiliary input/output terminal blocks can be added to provide additional field wiring connections. The auxiliary input/output terminal strip is inserted directly into the lower edge of the IC200CHS012.

The IC200CHS012 unit can be mounted on the same DIN rail as the connector type I/O carrier or on a separate DIN rail. For those applications that require maximum shock and mechanical vibration resistance, the IC200CHS012 input/output terminal unit must be mounted on the panel.

IC200CHS012 盒式插入式 I/O 端子 DIN导轨

【其他型号推荐】