IC200CHS011 屏障式插入式 I/O 端子 连接到连接器

【产品详情】

GE Fanuc IC200CHS011 端子是一款Versamax系列屏障式插入式I/O端子模块。IC200CHS011端子允许在连接器式 I/O 载体和现场接线之间连接。IC200CHS011端子有一个连接器，连接器式 I/O 载体的电缆连接到该连接器。此外，IC200CHS011终端还有36个屏障式终端。这些屏障式端子中的每一个都可以容纳 1 或 2 根横截面达 2.1 平方毫米的实心/绞合铜线。提供了一个透明的铰链保护盖，用于覆盖接线端子。IC200CHS011端子可以安装在单独的DIN导轨上，也可以安装在与连接器式I/O载体相同的DIN导轨上。IC200CHS011端子的尺寸为 110.5 x 105.4 毫米。

IC200CHS011端子是GE Fanuc Versamax产品线的一部分，该产品线包括CPU模块、网络接口单元、电源、I/O模块、载波、扩展模块和通信模块。IC200CHS011端子的额定振动为 1 G，频率为 57 至 150 赫兹。IC200CHS011端子的冲击等级为 15 G，持续时间为 11 毫秒。推荐的工作和存储温度范围分别为 -40 至 140 华氏度和 -40 至 185 华氏度。相对湿度水平应保持在 5% 到 95% 之间。用于安装IC200CHS011端子的外壳应由钢制成，并应具有 IP 54 环保等级。外壳应提供防尘和防溅水保护。Versamax 模块的静电放电额定值为空气 8 kV，接触 4 kV。射频敏感度额定值为 10 伏 RMS，频率为 80 至 1000 兆赫兹。

IC200CHS011 是 GE Fanuc 为 VersaMax 系列制造的 36 屏障插入 I/O 载体。 它提供了一个接口，连接到连接器式 I/O 载体到现场布线。它的尺寸为 4.350 英寸。x 5.500 英寸x 2.750 英寸

IC200CHS011的特点包括能够提供不同类型的卡扣式输入/输出载体、提供卓越灵活性的插入端子以及热插拔。此外，该载体还支持屏障式、EIC盒式和弹簧式端子。

该装置中的每个端子可容纳一根或两根 AWG 为 22 或 AWG 为 14 的实心或绞合线。该IC200CHS011可容纳 14 AWG 的绞合线。

该IC200CHS011可承受高达 264 VAC 的电压范围和每点高达 2 安培或每个电源和接地高达 8 安培的电流水平。高达 300 VAC 的电涌不会损坏该载波。如果需要，可以添加多个辅助输入输出端子排，以提供额外的现场接线连接。辅助输入输出端子排直接插入 I/O 载体的下边缘。

IC200CHS011可以安装在与连接器式输入输出载体相同的DIN导轨上，也可以安装在单独的DIN导轨上。有些应用需要对机械振动和冲击具有最大的抵抗力。在这种情况下，IC200CHS011必须安装在面板上。 

IC200CHS011 屏障式插入式 I/O 端子 连接到连接器

【英文介绍】

The GE Fanuc IC200CHS011 terminal is a Versamax series screen plug-in I/O terminal module. The IC200CHS011 terminal allows connections between connector type I/O carriers and field wiring. The IC200CHS011 terminal has a connector to which a cable of the connector type I/O carrier is connected. In addition, the IC200CHS011 terminal has 36 screen terminals. Each of these screen terminals can accommodate 1 or 2 solid/stranded copper wires with a cross-section of up to 2.1 square mm. A transparent hinged protective cover is provided to cover the terminal. The IC200CHS011 terminals can be mounted on a separate DIN rail or on the same DIN rail as the connector type I/O carrier. The IC200CHS011 terminal measures 110.5 x 105.4 mm.

The IC200CHS011 terminal is part of the GE Fanuc Versamax product line, which includes CPU modules, network interface units, power supplies, I/O modules, carriers, expansion modules, and communication modules. The IC200CHS011 terminals are rated for vibration of 1 G and frequencies of 57 to 150 Hz. The IC200CHS011 terminal has an impact rating of 15 G and a duration of 11 ms. The recommended operating and storage temperature ranges are -40 to 140 degrees Fahrenheit and -40 to 185 degrees Fahrenheit, respectively. Relative humidity levels should be maintained between 5% and 95%. The housing for mounting IC200CHS011 terminals shall be made of steel and shall have IP 54 environmental protection rating. The housing shall provide dust and splash protection. The Versamax module has an electrostatic discharge rating of 8 kV for air and 4 kV for contact. The RF sensitivity rating is 10 volt RMS and the frequency is 80 to 1000 MHZ.

The IC200CHS011 is a 36-barrier insertion I/O carrier manufactured by GE Fanuc for the VersaMax family. It provides an interface to connect connector type I/O carriers to field wiring. It measures 4.350 inches. x 5.500 inches x 2.750 inches

Features of the IC200CHS011 include the ability to provide different types of snap-in input/output carriers, insertion terminals for excellent flexibility, and hot swapping. In addition, the carrier supports screen, EIC box and spring terminals.

Each terminal in the device can accommodate one or two solid or twisted wires with AWG of 22 or AWG of 14. The IC200CHS011 can accommodate 14 AWG stranded wire.

The IC200CHS011 can withstand voltage ranges up to 264 VAC and current levels up to 2 amps per point or up to 8 amps per power supply and ground. Power surges up to 300 VAC will not damage this carrier. If required, multiple auxiliary input/output terminals can be added to provide additional field wiring connections. The auxiliary I/O terminal block is inserted directly into the lower edge of the I/O carrier.

The IC200CHS011 can be mounted on the same DIN rail as the connector type input/output carrier or on a separate DIN rail. Some applications require maximum resistance to mechanical vibration and shock. In this case, the IC200CHS011 must be mounted on the panel.

IC200CHS011 屏障式插入式 I/O 端子 连接到连接器

【其他型号推荐】