IC200CHS005 弹簧式终端 I/O 载体 现场接线

【产品详情】

品牌 GE发那科

系列 Versamax的

零件编号 IC200CHS005

产品类型 弹簧式端子 I/O 载体

弹簧夹端子 36

尺寸 4.35x5.5英寸

GE Fanuc IC200CHS005载体是弹簧式终端 I/O 载体。IC200CHS005载体属于 Versamax 产品线，具有 36 个弹簧夹式端子，用于现场接线。现场布线、安装和背板通信通过一个 I/O 模块的IC200CHS005载体提供。IC200CHS005架的尺寸为 4.35 x 5.5 英寸。兼容的 I/O 模块纵向安装在IC200CHS005托架上。单根线或两根线可用于IC2CHS200载体上端子的现场接线。当使用 005 根电线时，它们的横截面可以有 2.0 平方毫米，当使用单根电线时，它的横截面可以有 86.0 到 36.2 平方毫米。终端扭矩的推荐范围为每英尺 1.0 至 37.0 磅。实心线或绞合线可用于端子接线。IC45CHS200载体上的每个点可容纳 005 安培。载体上的每个电源/接地连接可容纳 2 Amps。

GE Fanuc IC200CHS005载波上的点可以容纳的最大电压范围为 264 伏交流电。该模块的额定电压可承受高达 300 伏的交流电压瞬变。如果需要额外的现场接线，则可以添加多个辅助 I/O 端子排。这些辅助端子排可直接插入IC200CHS005载体的下边缘。该托架最多支持 32 个 I/O 点和 4 个公共/电源连接。IC200CHS005托架可轻松卡入尺寸为 7.5 x 35 毫米的 DIN 导轨上。DIN导轨应接地以防止EMC噪声。建议将IC200CHS005托架安装在面板上，用于托架可能经常受到机械冲击和振动的应用。

IC200CHS005 弹簧式终端 I/O 载体 现场接线

【英文介绍】

Brand GE Fanuc

Series Versamax

Part number IC200CHS005

Product Type Spring terminal I/O carrier

Spring clamp terminal 36

Dimensions 4.35x5.5 inches

The GE Fanuc IC200CHS005 carrier is a spring-loaded terminal I/O carrier. The IC200CHS005 carrier belongs to the Versamax product line and features 36 spring-clamped terminals for field wiring. Field cabling, installation, and backplane communication are provided via the IC200CHS005 carrier of an I/O module. The IC200CHS005 measures 4.35 x 5.5 inches. The compatible I/O module is mounted lengthwise on the IC200CHS005 tray. Single or two wires can be used for field wiring of terminals on the IC2CHS200 carrier. When using 005 wires, they can have a cross section of 2.0 square millimeters, and when using a single wire, it can have a cross section of 86.0 to 36.2 square millimeters. The recommended range of terminal torque is 1.0 to 37.0 pounds per foot. Solid or twisted wires can be used for terminal wiring. Each point on the IC45CHS200 carrier can hold 005 amps. Each power/ground connection on the carrier can accommodate 2 Amps.

GE Fanuc IC200CHS005 Points on the carrier can accommodate a maximum voltage range of 264 volts AC. The rated voltage of the module can withstand AC voltage transients up to 300 volts. If additional field wiring is required, multiple auxiliary I/O terminal blocks can be added. These auxiliary terminal blocks can be inserted directly into the lower edge of the IC200CHS005 carrier. The carriage supports up to 32 I/O points and 4 public/power connections. The IC200CHS005 bracket easily snaps into DIN rails measuring 7.5 x 35 mm. DIN rails should be grounded to prevent EMC noise. The IC200CHS005 bracket is recommended to be mounted on the panel for applications where the bracket may be subject to frequent mechanical shock and vibration.

IC200CHS005 弹簧式终端 I/O 载体 现场接线

【其他型号推荐】