IC200CHS001 屏障式 I/O 载体模块 提供现场布线

【产品详情】

GE Fanuc VersaMax IC200CHS001模块是一种屏障式 I/O 载体模块。IC36CHS200载体模块上有 001 个屏障式端子。该模块为一个 I/O 模块提供现场布线、背板通信和安装。IC200CHS001载板模块上的端子可容纳 1 或 2 根绞合线或实心线，规格从 AWG 22 到 AWG 14。GE Fanuc 建议使用额定温度为 90 摄氏度的铜线。必须注意确保当 2 根电线插入同一位置时，两根电线的类型和尺寸相同。IC200CHS001载波模块可以承受 2 安培/点或 8 安培/电源/接地连接。该模块可以承受高达 264 伏交流电的电压，高达 300 伏交流电的瞬态不会损坏IC200CHS001载波模块。

IC200CHS001 是 GE Fanuc 为其 VersaMax 系列制造的屏障式 I/O 载体。 它由 36 个屏障式端子组成，为一个输入输出模块提供背板通信和现场布线。

突出功能包括将模块牢固地固定到托架上的闩锁孔和为接线端子提供覆盖的铰链透明门。每个输入输出模块上都贴有印刷接线卡，可以折叠并插入铰链门中。下边缘的槽口专门用于在需要额外的总线连接点时连接辅助输入输出端子排。

IC200CHS001可轻松卡入 7.5 mm x 35 mm DIN 导轨上。为了确保电磁兼容性 （EMC），将 DIN 导轨接地非常重要。导轨必须具有导电耐腐蚀的表面处理，最好是未上漆的。IC200CHS001 还必须安装在面板上，以用于需要最大抗机械振动能力的应用。

该IC200CHS001每个电源和接地可容纳 8 安培，或每点最多可容纳 2 安培的电流水平，或电压范围高达 264 伏交流电。 高达 300 伏交流电的电涌不太可能损坏该载波。如果需要，可以添加额外的辅助输入输出端子排，以提供额外的现场接线连接。辅助输入输出端子排直接插入输入输出载体的下边缘。

IC200CHS001托架模块的推荐端子扭矩为每英尺 0.37 至 0.5 磅。IC200CHS001托架模块安装在尺寸为 7.5 x 35 毫米的 DIN 导轨上。I/O与安装在托架上纵向兼容，使其与DIN导轨平行。GE Fanuc 建议 DIN 导轨电气接地，并具有耐腐蚀的导电表面。IC200CHS001 载波模块支持最多 32 个 I/O 点和 4 个公共/电源连接的接线。IC200CHS001 托架模块配有易于设置的键控旋钮，可确保将正确类型的 I/O 模块安装到托架上。提供了一个模块闩锁孔，可将 I/O 模块牢固地固定在IC200CHS001载体模块上。IC200CHS001载体模块的下边缘还设有槽口，用于连接辅助 I/O 端子排

IC200CHS001 屏障式 I/O 载体模块 提供现场布线

【英文介绍】

The GE Fanuc VersaMax IC200CHS001 module is a screwed-down I/O carrier module. 001 screen terminals on the IC36CHS200 carrier module. This module provides field cabling, backplane communication, and installation for an I/O module. The terminals on the IC200CHS001 carrier module can accommodate 1 or 2 stranded or solid wires in sizes from AWG 22 to AWG 14. GE Fanuc recommends copper wire with a temperature rating of 90 degrees Celsius. Care must be taken to ensure that when 2 wires are inserted in the same place, both wires are of the same type and size. The IC200CHS001 carrier module can withstand 2 amps/points or 8 amps/power/ground connections. The module can withstand voltages up to 264 volts AC and transients up to 300 volts AC will not damage the IC200CHS001 carrier module.

The IC200CHS001 is a screwed-down I/O carrier manufactured by GE Fanuc for its VersaMax family. It consists of 36 screen terminals that provide backplane communication and field wiring for an input/output module.

Prominent features include latch holes that securely secure the module to the carrier and hinged transparent doors that provide cover for the terminal. Each input/output module is affixed with a printed wiring card that can be folded and inserted into the hinged door. The notch on the lower edge is specifically used to connect the secondary I/O terminal block when additional bus connection points are required.

The IC200CHS001 easily snaps into the 7.5mm x 35 mm DIN rail. To ensure electromagnetic compatibility (EMC), it is important to ground the DIN rail. The guide must have a conductive, corrosion-resistant surface finish, preferably unpainted. The IC200CHS001 must also be mounted on the panel for applications that require maximum resistance to mechanical vibration.

The IC200CHS001 can accommodate 8 amps per power supply and ground, or a current level of up to 2 amps per point, or a voltage range up to 264 volts AC. Power surges of up to 300 volts AC are unlikely to damage this carrier. If required, additional auxiliary input/output terminal blocks can be added to provide additional field wiring connections. The auxiliary I/O terminal block is inserted directly into the lower edge of the I/O carrier.

The recommended terminal torque for the IC200CHS001 bracket module is 0.37 to 0.5 pounds per foot. The IC200CHS001 bracket module is mounted on DIN rails measuring 7.5 x 35 mm. I/O is longitudinally compatible with mounting on the bracket so that it is parallel to the DIN rail. GE Fanuc recommends DIN rails to be electrically grounded and have a corrosion-resistant conductive surface. The IC200CHS001 carrier module supports wiring up to 32 I/O points and 4 public/power connections. The IC200CHS001 bracket module is equipped with an easy-to-set keyser knob to ensure that the correct type of I/O module is mounted to the bracket. A module latch latch is provided to securely attach the I/O module to the IC200CHS001 carrier module. The lower edge of the IC200CHS001 carrier module is also provided with notches for connecting the auxiliary I/O terminal block

IC200CHS001 屏障式 I/O 载体模块 提供现场布线

【其他型号推荐】