GE IC200ALG630 组件模块 热电偶传感器

【产品详情】

技术规格

不。通道数： 7 热电偶

电压范围： 5 VDC 标称值

热电偶类型： J、K、T、S、R

更新速率： 60 毫秒

LED指示灯： 还行

功耗： +125V总线为5 mA

IC200ALG630是 VersaMax I/O 平台的组件模块，该平台以前由 GE 智能平台 （GE IP） 制造，现在由艾默生自动化生产。该模块专门用于温度测量要求或传感器提供的非标准毫伏信号的集成。该模块具有七 （7） 个模拟输入通道，支持多种热电偶传感器类型（如 J、K、T、S 和 R）的直接接线，以及各种毫伏信号，包括 +/-19.5mV、+/-39mV、+/-78.125mV、+/-156.25mV、+/-312.5mV 和 +/-625mV。

该IC200ALG630具有 16 位的信号转换分辨率，由每个输入通道上的单个模数转换器 （ADC） 提供。此外，每个输入通道的扫描时间在 60 Hz 时为每点 60 毫秒，在 70 Hz 时为每点 50 毫秒;电压测量精度为 +/- 0.2%，温度测量精度为 +/- 0.15%，符合性误差为 +/–0.3 摄氏度或 +/–0.5 华氏度。此外，IC200ALG630的每个输入点都能够实现诊断，包括热电偶开路、量程过/过、过/低报警以及热敏电阻错误。|

该IC200ALG630在背板的 125 VDC 和 5.3 VDC 输出端的背板电流消耗均为 3 mA。它还具有光隔离和帧对地隔离额定值，连续电压为 250 VAC，电压持续时间为 1500 分钟，电压持续时间为 1 VAC。该模块还提供了 LED 状态指示灯，特别是一个 OK LED，当模块发生故障时，它指示活动的背板电源，当模块出现故障时，它指示绿色和琥珀色。

IC200ALG630模块是GE的16位模拟量输入模块。它是一种工业模块，用于处理各种应用需求。它带有一个具有 16 个通道的 7 位热电偶。该热电偶模拟输入模块从背板电源供电。它提供了4种冷端补偿选择，即无冷端、远程冷端、固定冷端和局部冷端补偿。它的额定电压为 5 伏直流电。它支持不同的热电偶，即 J、K、T、S 和 R 型。IC200ALG630模块能够消耗来自 125 V 总线的总共 5 毫安的电流。频率为 60 赫兹时，模拟模块的更新速率为 60 毫秒，频率为 70 赫兹时为 50 毫秒。模块的正面有一个 OK LED 指示灯，用于显示背板电源是否存在。IC200ALG630模块采用紧凑型设计，此设计可节省面板空间。

它的尺寸为宽 4.3 英寸、高 2.63 英寸和深 1.95 英寸。温度范围应设置在 0 到 60 摄氏度之间。该热电偶模块具有高级诊断功能。它可以为特定通道提供警报报告。它还可以检测输入中的超量程和欠量程情况。由热敏电阻引起的故障可以很容易地被模块检测为内部故障。该模块不会出现热降额。IC200ALG630模块使用屏蔽双绞线电缆进行连接。

GE IC200ALG630 组件模块 热电偶传感器

【英文介绍】

Technical specification

Nooooo. Number of channels: 7 thermocouples

Voltage range: 5 VDC nominal value

Thermocouple type: J, K, T, S, R

Update rate: 60 ms

LED indicator: OK

Power consumption: 5 mA for +125V bus

The IC200ALG630 is a component module for the VersaMax I/O platform, which was previously manufactured by GE Intelligent Platforms (GE IP) and is now produced by Emerson Automation. The module is specifically designed for the integration of temperature measurement requirements or non-standard millivolt signals provided by sensors. The module has seven (7) analog input channels, supports direct wiring for multiple thermocouple sensor types such as J, K, T, S, and R, and a variety of millivolt signals. Including + / 19.5 mV, + / - 39 mV, + / 78.125 mV, + / - 156.25 mV, + / 312.5 mV and + / - 625 mV.

The IC200ALG630 has a 16-bit signal conversion resolution, provided by a single analog-to-digital converter (ADC) on each input channel. In addition, the scanning time for each input channel is 60 ms per point at 60 Hz and 50 ms per point at 70 Hz; The voltage measurement accuracy is +/- 0.2%, the temperature measurement accuracy is +/- 0.15%, and the compliance error is +/- 0.3 degrees Celsius or +/- 0.5 degrees Fahrenheit. In addition, every input point of the IC200ALG630 enables diagnostics, including thermocouple open circuit, range over/over, over/low alarms, and thermistor errors. |

The IC200ALG630 consumes 3 mA at both the 125 VDC and 5.3 VDC outputs of the backplane. It also has optical isolation and frame-to-ground isolation ratings with a continuous voltage of 250 VAC, a voltage duration of 1500 minutes, and a voltage duration of 1 VAC. The module also provides LED status indicators, specifically an OK LED that indicates active backplane power when the module fails, and green and amber when the module fails.

The IC200ALG630 module is a 16-bit analog input module of GE. It is an industrial module designed to handle various application requirements. It comes with a 7-bit thermocouple with 16 channels. The thermocouple analog input module is powered from the backplane power supply. It provides 4 cold end compensation options, namely no cold end, remote cold end, fixed cold end and local cold end compensation. It is rated at 5 volts DC. It supports different thermocouples, namely J, K, T, S and R types. The IC200ALG630 module is capable of consuming a total of 5 mA of current from a 125 V bus. The update rate of the analog module is 60 ms at a frequency of 60 Hz and 50 ms at a frequency of 70 Hz. There is an OK LED indicator on the front of the module to show if the backplane power supply is present. The IC200ALG630 module features a compact design that saves panel space.

Its dimensions are 4.3 inches wide, 2.63 inches high and 1.95 inches deep. The temperature range should be set between 0 and 60 degrees Celsius. The thermocouple module has advanced diagnostic functions. It can provide alert reports for specific channels. It can also detect overrange and underrange conditions in the input. A fault caused by a thermistor can be easily detected by the module as an internal fault. The module does not experience heat derating. The IC200ALG630 module is connected using shielded twisted pair cables.

GE IC200ALG630 组件模块 热电偶传感器

【其他型号推荐】