IC200ALG432 混合模拟模块 直流电源供电

【产品详情】

GE Fanuc IC200ALG432模块是一个混合模拟模块，采用 10 伏直流电源供电。它是一个 12 位模块，配备 4 个通道和 2 个输出通道。模拟模块的更新速率时间为0.4毫秒，输入的响应时间为5毫秒。该模拟模块需要外部电源为输出供电。该模块的输入由收发器的外部电源供电。处理操作的模块中存在 CPU。IC200ALG432模块的正面有 LED 指示灯，可显示电源和背板电流。该混合模块中不会发生热降额。IC200ALG432模块在正常运行时总共消耗 160 毫安的电流，包括负载电流。该模块的诊断功能有助于检测用户侧电源的损耗。

GE Fanuc IC200ALG432模块带有可配置的警报，可以针对不同的事件进行设置。在安装过程中，应保护模块免受电磁噪声和空气污染物的影响。安装区域的温度不应超过60摄氏度。模块的精度取决于环境温度。在 25 摄氏度时，它具有满量程精度的 +/-0.3%，在 60 摄氏度时，它的最大精度为 +/-1%。IC200ALG432模块的分辨率为 8 个计数。模块的共模电压为 0 伏。IC200ALG432模块消耗 60 毫安的电流，来自使用 5 V 电源运行的总线。

客户问答

问题：什么是IC200ALG432？答：IC200ALG432是GE Fanuc Versamax系列的12位、4通道、输入电压和2通道、输出电压模拟混合模块。

问：渠道有哪些特点？ 答： 有 4 个单端通道用于输入电压，2 个单端通道用于输出电压IC200ALG432。

问： FLD PWR LED 表示什么？ 答： 此 LED 指示用户侧电源已接通。

问：OK LED 表示什么？ 答： 此 LED 指示背板电源已存在。

问：背板电流消耗是多少？ 答：5V输出：最大60mA

问：有外接电源吗？答：是的，输出需要外部 24V 电源。

问：配置参数是什么？ 答： 输出默认值

问：什么是过滤器响应？ 答案：5.0 毫秒

问：每个模块的更新速率是多少？ 答案：0.4 毫秒

问：输入电压是多少？ 答：-10 至 +10 VDC

IC200ALG432 混合模拟模块 直流电源供电

【英文介绍】

The GE Fanuc IC200ALG432 module is a hybrid analog module powered by a 10 volt DC power supply. It is a 12-bit module equipped with 4 channels and 2 output channels. The update rate time of the analog module is 0.4 ms and the response time of the input is 5 ms. The analog module requires an external power supply for output power. The input to the module is powered by the transceiver's external power supply. Cpus exist in the module that processes operations. The front of the IC200ALG432 module has LED indicators that show the power supply and backplane current. No heat derating occurs in the hybrid module. The IC200ALG432 module consumes a total of 160 milliamps of current, including load current, during normal operation. The module's diagnostic function helps detect the loss of the power supply on the user side.

The GE Fanuc IC200ALG432 module comes with configurable alarms that can be set for different events. During installation, the module should be protected from electromagnetic noise and air pollutants. The temperature in the installation area should not exceed 60 degrees Celsius. The accuracy of the module depends on the ambient temperature. At 25 degrees Celsius, it has a full scale accuracy of +/-0.3%, and at 60 degrees Celsius, it has a maximum accuracy of +/-1%. The IC200ALG432 module has a resolution of 8 counts. The common mode voltage of the module is 0 volts. The IC200ALG432 module consumes 60 mah of current from the bus running on a 5 V power supply.

Customer question and answer

Question: What is IC200ALG432? A: The IC200ALG432 is a 12-bit, 4-channel, input voltage and 2-channel, output voltage analog hybrid module of the GE Fanuc Versamax series.

Q: What are the characteristics of channels? A: There are 4 single-ended channels for input voltage and 2 single-ended channels for output voltage IC200ALG432.

Q: What does FLD PWR LED stand for? A: This LED indicates that the power on the user side is connected.

Q: What does OK LED stand for? A: This LED indicates that the backplane power supply is present.

Q: What is the backplane current consumption? A: 5V output: up to 60mA

Q: Is there an external power supply? A: Yes, the output requires an external 24V power supply.

Q: What are the configuration parameters? A: The default value is displayed

Q: What is Filter response? Answer: 5.0 milliseconds

Q: What is the update rate for each module? Answer: 0.4 milliseconds

Q: What is the input voltage? Answer: -10 to +10 VDC

IC200ALG432 混合模拟模块 直流电源供电

【其他型号推荐】