GE IC200ALG431 混合模块 工业自动化应用 模拟通道连接

【产品详情】

品牌 GE发那科

系列 Versamax的

零件编号 IC200ALG431

描述 模拟混合模块

分辨率 12 位

IC200ALG431模块是GE Fanuc混合模块。它是一款 12 位器件，用于工业自动化应用。模拟模块通过使用单个载波基座将输入和输出组合在一起，从而提供了灵活性。模块的前部有 LED 指示灯，可帮助操作员了解模块中的功率流。该模块具有“FLD PWR”和“OK”LED 指示灯。该模块尺寸紧凑，宽度为 4.30 英寸，深度为 1.95 英寸，高度为 2.63 英寸。IC200ALG431模块重约 4.4 磅。该模块带有 0 至 10 伏直流模拟输入和 0 至 10 伏直流模拟输出。电源由外部电源提供给模块。

IC200ALG431模块使用屏蔽双绞线电缆进行模拟通道连接。在模块安装过程中，模块应正确接地到源设备。如果模块使用连接器式载体连接，则可以将其连接到插入端子。混合模块配备了一个诊断程序，有助于报告电路中的故障。模块中的 I/O 默认值可与跳线一起使用。IC200ALG431模块总共消耗 60 毫安的电流，来自 5 伏总线接口单元。该模块可以通过使用面板安装轻松安装到系统中。它是一种采用开放式架构设计的室内设备。应防止喷水并远离热源。环境温度不应超过60摄氏度。

GE Fanuc IC200ALG431 VersaMax 模拟混合 I/O 模块是一个 6 通道混合模拟 I/O 模块，可从 GE Fanuc VersaMax 控制系统获得。该模块提供四个 0 至 10 伏直流额定模拟输入电路和两个 0 至 10 伏直流额定模拟输出电路。IC200ALG431 模拟混合 I/O 模块需要外部 24 伏直流电源为其所有输出供电，而所有 4 个输入都需要由外部电源供电的用户提供的收发器。所有智能微处理器均由 CPU 模块或网络接口单元 （NIU） 处理，该模块能够处理多达 4 个字的模拟输入和 2 个字的模拟输出。

GE IC200ALG431 混合模块 工业自动化应用 模拟通道连接

【英文介绍】

Brand GE Fanuc

Series Versamax

Part number IC200ALG431

Describe the analog hybrid module

Resolution 12 bits

The IC200ALG431 module is a GE Fanuc hybrid module. It is a 12-bit device for industrial automation applications. Analog modules provide flexibility by combining inputs and outputs using a single carrier base. The front of the module has LED indicators that help the operator understand the power flow in the module. The module has "FLD PWR" and "OK" LED indicators. The module is compact in size with a width of 4.30 inches, a depth of 1.95 inches, and a height of 2.63 inches. The IC200ALG431 module weighs about 4.4 pounds. The module has a 0 to 10 volt DC analog input and a 0 to 10 volt DC analog output. The external power supply is used to supply power to the module.

The IC200ALG431 module uses shielded twisted pair cables for analog channel connections. During module installation, the module is properly grounded to the source device. If the module is connected using a connector carrier, it can be connected to the insert terminal. The hybrid module is equipped with a diagnostic program that helps to report faults in the circuit. The I/O default in the module can be used with jumpers. The IC200ALG431 module consumes a total of 60 MA of current from the 5-volt bus interface unit. The module can be easily installed into the system by using panel mounting. It is an indoor device designed with an open architecture. Avoid water spray and keep away from heat sources. The ambient temperature should not exceed 60 degrees Celsius.

The GE Fanuc IC200ALG431 VersaMax Analog Hybrid I/O module is a 6-channel hybrid analog I/O module available from the GE Fanuc VersaMax control system. The module offers four rated analog input circuits of 0 to 10 volts DC and two rated analog output circuits of 0 to 10 volts DC. The IC200ALG431 analog hybrid I/O module requires an external 24-volt DC power supply to power all of its outputs, while all 4 inputs require a user-supplied transceiver powered by an external power supply. All smart microprocessors are handled by a CPU module or network interface Unit (NIU), which is capable of handling up to 4 words of analog input and 2 words of analog output.

GE IC200ALG431 混合模块 工业自动化应用 模拟通道连接

【其他型号推荐】