IC20OALG265 模拟输入模块 具有不同的功能

【产品详情】

技术规格

不。通道数： 15 个单端，一组

电压范围： -10 至 +10 伏直流电

电流范围： 不适用

更新速率： 7.5 毫秒

输入滤波器响应： 不适用

功耗： +150V总线为5mA

 IC200ALG265模块是GE Fanuc Automation的Versamax系列中包含的模拟输入模块。该模块具有不同的功能，有助于改进任何应用过程，并使主设备能够连接到模块范围内的输入设备。该模块带有 15 个电压输入，并提供多达 15 个电流输入的接口。该特定模块是 IC200ALG264 模块的改进版本，它带有过压保护和改进的诊断工具。GE Fanuc Automation IC200ALG265模拟输入模块带有输入保护功能，可保护输入检测电阻器免受功率过大的损坏。如果模块受到射频干扰，精度必须至少降低 +/- 2%。

GE Fanuc Automation IC200ALG265模拟输入模块有 15 个通道，这些通道是单端的，并组织在单个组中。每个通道之间都没有隔离，但该模块在框架和接地之间提供 250 伏交流连续和 1500 伏交流电的隔离水平，持续 1 分钟。该模块包括一个“OK”LED，当所有连接和编程都正确开发时，该 LED 会亮起。GE Fanuc Automation IC200ALG265 模拟输入模块的更新速率为 7.5 毫秒，输入电压范围为 -10 至 10 伏，输入电流范围为 1 至 20 毫安。该模块没有热降额功能，也不支持外部电源（通过背板电源供电）。

IC20OALG265 模拟输入模块 具有不同的功能

【英文介绍】

Technical specification

Nooooo. Number of channels: 15 single-ended, one group

Voltage range: -10 to +10 volts DC

Current range: Not applicable

Update rate: 7.5ms

Input filter response: Not applicable

Power consumption: +150V bus is 5mA

The IC200ALG265 module is an analog input module included in GE Fanuc Automation's Versamax family. The module has different functions that help to improve any application process and enable the main device to connect to input devices within the range of the module. The module comes with 15 voltage inputs and provides interfaces for up to 15 current inputs. This particular module is an improved version of the IC200ALG264 module with overvoltage protection and improved diagnostic tools. GE Fanuc Automation IC200ALG265 analog input module with input protection to protect the input detection resistor from excessive power damage. If the module is subject to RF interference, the accuracy must be reduced by at least +/- 2%.

The GE Fanuc Automation IC200ALG265 analog input module has 15 channels that are single-ended and organized in a single group. There is no isolation between each channel, but the module provides isolation levels of 250 volts AC continuous and 1,500 volts AC between the frame and ground for 1 minute. The module includes an "OK" LED that lights up when all connections and programming are properly developed. The GE Fanuc Automation IC200ALG265 analog input module has an update rate of 7.5 ms with an input voltage range of -10 to 10 volts and an input current range of 1 to 20 mA. The module does not have the heat derating function and does not support external power supplies (powered by the backplane power supply).

IC20OALG265 模拟输入模块 具有不同的功能

【其他型号推荐】