IC200ALG261 模拟输入模块  背板电源供电

【产品详情】

技术规格

不。通道数： 8 个差速器，一组

电压范围： -10 至 +10 伏直流电

电流范围： 不适用

更新速率： 7.5 毫秒

输入滤波器响应： 不适用

功耗： +200V总线为5mA

GE Fanuc Versamax IC200ALG261模块是具有 8 个差分通道的模拟输入模块。它可用于可编程逻辑控制器或PLC。由于 IC8ALG200 模拟量输入模块具有 261 个通道，因此最多可用作 8 个差分电压输入的接口设备。IC200ALG261模拟量输入模块由 Versamax PLC 中的背板电源供电，这意味着它不需要外部电源即可正常运行。但是，如果用户将模块安装在带有收发器的系统中，则用户还必须为收发器安装外部电源。该输入模块在 200 V 电压下消耗 5 毫安的背板电流。

GE Fanuc Versamax IC200ALG261模拟量输入模块可以支持PLC的CPU或NIU设备的智能处理。该模块有一个绿色 LED 指示灯，标记为“OK”LED，它亮起告诉操作员有背板电源，内部产生的现场电源工作正常，并且模块已正确配置并被背板识别。IC200ALG261模拟输入模块可以报告其现场侧电路的内部电源损失，作为诊断功能。该输入模块没有组到组或通道到通道的隔离，但它在用户输入与逻辑或框架接地之间的隔离是 1500 分钟的 1 伏交流隔离电压和 250 伏交流连续隔离电压。

IC200ALG261 模拟输入模块  背板电源供电

【英文介绍】

Technical specification

Nooooo. Number of channels: 8 differentials, one set

Voltage range: -10 to +10 volts DC

Current range: Not applicable

Update rate: 7.5ms

Input filter response: Not applicable

Power consumption: +200V bus is 5mA

The GE Fanuc Versamax IC200ALG261 module is an analog input module with 8 differential channels. It can be used with programmable logic controllers or PLCS. Since the IC8ALG200 analog input module has 261 channels, it can be used as an interface device for up to 8 differential voltage inputs. The IC200ALG261 analog input module is powered by the backplane power supply in the Versamax PLC, which means that it does not require an external power supply to operate properly. However, if the user installs the module in a system with a transceiver, the user must also install an external power supply for the transceiver. The input module consumes 5 mA of backplane current at 200 V voltage.

The GE Fanuc Versamax IC200ALG261 analog input module can support intelligent processing of PLC CPU or NIU devices. The module has a green LED indicator, labeled "OK" LED, which lights up to tell the operator that there is backplane power, that the internally generated field power is working properly, and that the module is correctly configured and recognized by the backplane. The IC200ALG261 analog input module can report the internal power loss of its field side circuit as a diagnostic function. The input module does not have group to group or channel to channel isolation, but its isolation between user input and logic or frame ground is 1500 minutes of 1 volt AC isolation voltage and 250 volts AC continuous isolation voltage.

IC200ALG261 模拟输入模块  背板电源供电

【其他型号推荐】