IC200ALG260 模拟输入模块 分布式I/O模块

【产品详情】

 IC200ALG260是 VersaMax 模拟输入模块。该模块以前由 GE Fanuc Automation 制造，现在隶属于 Emerson Automation。该模拟量输入模块具有八 （8） 个模拟输入，可专门配置为电压或电流信号、4-20 mA 电流输入信号和 -10VDC / +10 VDC 电压输入信号，通道分辨率为 12 位。

技术规格

不。通道数： 8 个单端，一组

电压范围： -10 至 +10 伏直流，0 - 10 伏直流电

电流范围： 4 - 20 毫安

更新速率： 0.4 毫秒

输入滤波器响应： 5.0 毫秒

功耗： +130V总线为5 mA

IC200ALG260模拟量输入模块属于GE Fanuc Versamax系列分布式I/O模块。它可以接收来自电流和电压供电输入设备的信号。模块的通道数为8个。它没有外部电源。该模块的额定功耗为 130 毫安，来自 5 伏总线电压源。用户收发器必须使用外部电源供电。IC200ALG260 模拟输入模块有 2 个 LED 指示灯，分别是“INT PWR”LED 和“OK”LED，分别指示模拟现场侧电路中是否存在内部产生的场电和背板电源。

IC200ALG260 模拟输入模块具有 0.4 毫秒的额定更新时间和 5 毫秒的额定输入滤波时间。其诊断功能可以检测现场侧电路中的内部电源故障。电压和电流模式配置可以通过载波端子上的 2 个跳线完成。其模拟输入数据可以配置为在发生故障时保持最后状态。如果模块是自动配置的，则输入的默认值为 0。该模块的电流模式输入特性包括 4 至 20 毫安的输入电流范围、200 欧姆的输入阻抗、4 微安的分辨率、5 毫秒的滤波器响应时间和每个模块 0.4 毫秒的更新速率。它提供 8 个电压输入或 8 个电流输入的接口。它使用背板电源的电源进行模块操作。IC200ALG260模块的尺寸为 4.3 x 2.63 x 1.956 英寸。它支持热插入（带电插入）。它可用于扩展 Versamax 系统的输入功能。

IC200ALG260 模拟输入模块 分布式I/O模块

【英文介绍】

IC200ALG260 is the VersaMax analog input module. The module was previously manufactured by GE Fanuc Automation and is now part of Emerson Automation. The analog input module has eight (8) analog inputs that can be configured specifically for voltage or current signals, 4-20 mA current input signals, and -10VDC / + 10VDC voltage input signals with a channel resolution of 12 bits.

Technical specification

Nooooo. Number of channels: 8 single-ended channels in a group

Voltage range: -10 to +10 volts DC, 0-10 volts DC

Current range: 4-20 MA

Update rate: 0.4 ms

Input filter response: 5.0 ms

Power consumption: 5 mA for the +130V bus

The IC200ALG260 analog input module belongs to GE Fanuc Versamax series distributed I/O modules. It can receive signals from current and voltage supplied input devices. The number of channels for a module is 8. It has no external power source. The module has a rated power consumption of 130 mA from a 5 volt bus voltage source. The user transceiver must be powered by an external power source. The IC200ALG260 analog input module has two LED indicators, respectively "INT PWR" LED and "OK" LED, indicating whether there is internal generated field electricity and backplane power supply in the analog field side circuit.

The IC200ALG260 analog input module has a rated update time of 0.4 ms and a rated input filtering time of 5 ms. Its diagnostic function can detect internal power supply failures in field side circuits. Voltage and current mode configuration can be done with 2 jumpers on the carrier terminal. Its analog input data can be configured to maintain the last state in the event of a failure. If the module is automatically configured, the default value entered is 0. The module's current mode input features include an input current range of 4 to 20 mA, an input impedance of 200 ohms, a resolution of 4 microamps, a filter response time of 5 ms, and an update rate of 0.4 ms per module. It provides interfaces with 8 voltage inputs or 8 current inputs. It uses the power supply of the backplane power supply for module operation. The IC200ALG260 module measures 4.3 x 2.63 x 1.956 inches. It supports hot insertion (live insertion). It can be used to extend the input capabilities of the Versamax system.

IC200ALG260 模拟输入模块 分布式I/O模块

【其他型号推荐】