IC200ALG240 通道模拟输入模块 具有用户输入到逻辑隔离

【产品详情】

技术规格

不。输入数量： 8 隔离

电压范围： -10 至 +10 伏直流电

电流范围： 4 - 20 毫安

更新速率： 20 毫秒

输入滤波器响应： 不适用

功耗： 15 mA（来自+5V总线）

GE Fanuc IC200ALG240模块是一个具有 8 个通道的 Versamax 模拟输入模块。它设计用作商业或工业自动化应用中完整 Versamax I/O 或 PLC 系统的一部分。IC200ALG240模拟量输入模块是一个智能输入模块，可以接受多达8个不同模拟设备的输入。它还可以提供 16 位输入数据。它没有组间隔离，因为它的 8 个输入都排列在 1 组中，但它具有额定值为 250 伏交流连续和 1500 伏交流电长达 1 分钟的通道间隔离，并且它具有用户输入到逻辑隔离或用户输入到帧接地隔离，其额定电压也为 250 伏交流连续和 1500 伏交流电，最多 1分钟。

GE Fanuc IC200ALG240 Versamax 模拟量输入模块可以在电流模式或电压模式下运行。其在电流模式下的工作输入范围为 1 至 20 毫安电流，其在电压模式下的工作输入范围为 -10 至 10 伏直流电压。如果IC200ALG240模拟输入模块在电流模式下运行，则可能需要安装单独的电源来支持隔离输入。该输入模块易于故障排除和维修，因为它可以诊断欠量程、超量程、现场功率损耗、开路、高报警、低报警和非易失性存储器存储错误。模块上的 LED 指示灯还可以提醒操作员设备错误。

客户问答

问题：什么是IC200ALG240？答：IC200ALG240是GE Fanuc Versamax系列的8个隔离通道、16位、电压/电流、模拟输入模块。

问题：IC200ALG240接受和提供什么？ 答：该智能模块接受来自多达 8 个模拟设备的输入信号，并提供分辨率为 16 位的输入数据。

问：在当前模式下，需要什么？ 答： 在电流模式下，隔离输入可能需要单独的电源。

问：IC200ALG240的功能是什么？ 答：

8 个隔离式 4-20 mA 电流输入通道

16 位转换器分辨率

断线检测

高精度工厂校准

问：IC200ALG240的哪些功能是软件可配置的？ 答：

每通道可选择 4-20 mA 电流或 +/- 10 V 电压输入

可选输入滤波器，用于抑制正常模式交流拾音噪声

选择默认/保持最后状态操作

每通道选择默认值

每通道选择量程不足和量程以上诊断电平

每个通道的报警级别选择

每通道缩放

根据命令进行现场重新校准

问：绿色 FLD PWR LED 表示什么？ 答： 此 LED 指示模拟现场侧电路的背板电源和现场电源的存在。如果没有背板或现场电源，将关闭 FLD PWR LED。

问：OK LED 表示什么？ 答：

此 LED 指示模块状态：

绿色亮表示正常运行

闪烁绿色表示启动模式或更新

琥珀色闪烁表示自诊断错误

问：如果我的IC200ALG240不能正常工作，我该怎么办？ 答：您的IC200ALG240可能需要维修。

IC200ALG240 通道模拟输入模块 具有用户输入到逻辑隔离

【英文介绍】

Technical specification

Nooooo. Number of inputs: 8 Isolation

Voltage range: -10 to +10 volts DC

Current range: 4-20 MA

Update rate: 20 ms

Input filter response: Not applicable

Power consumption: 15 mA (from +5V bus)

The GE Fanuc IC200ALG240 module is a Versamax analog input module with 8 channels. It is designed to be used as part of a complete Versamax I/O or PLC system in commercial or industrial automation applications. The IC200ALG240 analog input module is an intelligent input module that can accept input from up to 8 different analog devices. It can also provide 16-bit input data. It does not have inter-group isolation because its 8 inputs are all arranged in 1 group, but it has inter-channel isolation rated at 250 volts AC continuous and 1500 volts AC for up to 1 minute, and it has user input to logical isolation or user input to frame ground isolation. It is also rated for 250 volts AC continuous and 1500 volts AC for up to 1 minute.

The GE Fanuc IC200ALG240 Versamax analog input module can operate in either current mode or voltage mode. Its operating input range in current mode is 1 to 20 mA current, and its operating input range in voltage mode is -10 to 10 volts DC voltage. If the IC200ALG240 analog input module is operating in current mode, a separate power supply may need to be installed to support isolated inputs. The input module is easy to troubleshoot and repair because it can diagnose underrange, overrange, field power loss, open circuit, high alarm, low alarm, and non-volatile memory storage errors. An LED indicator on the module can also alert the operator to equipment errors.

Customer question and answer

Question: What is IC200ALG240? A: The IC200ALG240 is an 8-channel, 16-bit, voltage/current, analog input module of the GE Fanuc Versamax family.

Question: What does IC200ALG240 accept and offer? A: The smart module accepts input signals from up to eight analog devices and provides input data with a resolution of 16 bits.

Q: In the current mode, what is required? A: In current mode, isolating the input may require a separate power supply.

Q: What is the function of IC200ALG240? A:

8 isolated 4-20 mA current input channels

16 bit converter resolution

Wire break detection

High precision factory calibration

Q: What features of IC200ALG240 are software-configurable? A:

Each channel can choose between 4-20 mA current or +/ -10 V voltage input

Optional input filter to suppress normal mode AC pickup noise

Select Default/Keep Last State action

Select the default value per channel

Select the diagnostic level for short range and above range per channel

Alarm level selection for each channel

Scale per channel

Field recalibration according to command

Q: What does the green FLD PWR LED mean? A: This LED indicates the presence of backplane power supply and field power supply that simulates the field side circuit. If there is no backplane or field power supply, the FLD PWR LED will be turned off.

Q: What does OK LED stand for? A:

This LED indicates module status:

Green on: The system is running properly

Blinking green Indicates startup mode or update

Amber flashing indicates a self-diagnostic error

Q: What should I do if my IC200ALG240 is not working properly? A: Your IC200ALG240 may need repair.

IC200ALG240 通道模拟输入模块 具有用户输入到逻辑隔离

【其他型号推荐】