GE IC755ACCBATTNL 工业操作终端的替换电池组

【产品详情】

 GE Fanuc IC755ACCBATTNL 组是用于 10、12 和 15 英寸 Quickpanel+ 端子的替换电池组。只能使用IC755ACCBATTNL组来更换这些 Quickpanel+ 装置上的电池。

IC755ACCBATTNL组是GE Fanuc的10英寸、12英寸和15英寸Quickpanel+工业操作终端的替换电池组。所有这些 Quickpanel+ 终端都配有 512 KB 电池备份 SRAM，用于存储有价值的数据。IC755ACCBATTNL组可用于更换端子上预装的电池，这些电池会因反复充电和放电而随着时间的推移而退化，最终在适当的时间内无法为SRAM提供备用电源。不同端子上的电池只能用IC755ACCBATTNL组更换。终端后盖上的7颗螺丝需要卸下，才能更换电池。然后需要通过轻轻按压标签的任一侧来松开后盖。之后，可以通过抬起后盖将其取下。

执行上述步骤后，旧电池将暴露在外。然后可以从IC755ACCBATTNL电池组电池中取出并更换为新电池，同时注意确保新电池的安装极性正确。最后，可以更换后盖并拧紧螺丝以将其固定到位。有故障的电池应按照当地和州法规进行处理。为最大限度地降低火灾和爆炸的风险，这些锂纽扣电池不应被压碎、拆卸、短路或在火灾中处置。更换活动只能由经验丰富且训练有素的技术人员在非危险场所进行。

GE IC755ACCBATTNL 工业操作终端的替换电池组

【英文介绍】

The GE Fanuc IC755ACCBATTNL pack is a replacement battery pack for 10, 12, and 15 inch Quickpanel+ terminals. You can only use the IC755ACCBATTNL group to replace the battery on these Quickpanel+ devices.

The IC755ACCBATTNL pack is a replacement battery pack for GE Fanuc's 10 ", 12 "and 15" Quickpanel+ industrial operating terminals. All of these Quickpanel+ terminals are equipped with 512 KB battery backup SRAM for storing valuable data. The IC755ACCBATTNL group can be used to replace pre-installed batteries on terminals that degrade over time due to repeated charging and discharging, eventually failing to provide backup power to the SRAM for the appropriate amount of time. Batteries on different terminals can only be replaced with the IC755ACCBATTNL group. The seven screws on the rear cover of the terminal need to be removed before the battery can be replaced. Then you need to release the back cover by gently pressing on either side of the tag. After that, it can be removed by lifting the back cover.

After performing the above steps, the old battery will be exposed. It can then be removed from the IC755ACCBATTNL battery pack and replaced with a new battery, taking care to ensure that the new battery is installed with the correct polarity. Finally, the back cover can be replaced and screwed to hold it in place. Faulty batteries should be handled in accordance with local and state regulations. To minimize the risk of fire and explosion, these lithium button batteries should not be crushed, disassembled, short-circuited, or disposed of in a fire. Replacement activities should only be carried out by experienced and trained technicians in non-hazardous locations.

GE IC755ACCBATTNL 工业操作终端的替换电池组

【其他型号推荐】