GE IC755ACCBATT 提供备用电源 存储器供电

【产品详情】

 IC755ACCBATT电池组是 7 英寸 Quickpanel+ 端子的替换电池组。IC755ACCBATT电池为 Quickpanel+ 端子上的 SRAM 提供备用电源。

GE IC755ACCBATT 电池组是带有 7 英寸显示屏的 Quickpanel+ 装置的替换电池组。Quickpanel+ 单元上的电池为 SRAM 存储器供电，并在电源故障期间保护已保存的数据。为防止火灾和化学灼伤，旧电池不应被压碎或丢入火中。只能使用指定用于 Quickpanel+ 产品（如 IC755ACCBATT 电池组）的电池。锂电池只能按照当地、州和联邦法规进行处理。Quickpanel+ 端子上的电池更换只能由经过培训的技术人员执行。在更换电池之前，应关闭设备的电源。IC755ACCBATT电池组中的电池应安装正确的极性。不应使用螺丝刀等金属工具取出已安装的电池。

7 英寸 Quickpanel+ 装置上的电池只能更换为部件号为 IC755ACCBATT 的电池。更换电池的第一步是取下电池盖，在向前滑动的同时按下电池盖。然后，应将电池线束连接器连接到接头。应验证正极向下，负极向上。然后，应将线束连接器缠绕起来，以匹配 Quickpanel 用户手册中显示的图表。不应允许线束连接器越过卡舌。最后，应将电池盖滑入到位，同时注意确保线束连接器没有被夹住。7 英寸 Quickpanel+ 装置重约 1.7 磅，尺寸为 7.56 x 5.39 x 1.42 英寸。

GE IC755ACCBATT 提供备用电源 存储器供电

【英文介绍】

The IC755ACCBATT battery pack is a replacement battery pack for the 7-inch Quickpanel+ terminal. The IC755ACCBATT battery provides backup power to the SRAM on the Quickpanel+ terminal.

The GE IC755ACCBATT battery pack is a replacement battery pack for the Quickpanel+ device with a 7-inch display. The battery on the Quickpanel+ unit powers the SRAM memory and protects saved data during a power failure. To prevent fire and chemical burns, old batteries should not be crushed or thrown into the fire. Only batteries specified for Quickpanel+ products such as the IC755ACCBATT battery pack can be used. Lithium batteries can only be handled in accordance with local, state and federal regulations. Battery changes on the Quickpanel+ terminals should only be performed by trained technicians. Power off the device before replacing the battery. The cells in the IC755ACCBATT battery pack should be installed with the correct polarity. Do not use a metal tool such as a screwdriver to remove the installed battery.

Batteries on 7-inch Quickpanel+ devices can only be replaced with batteries with part number IC755ACCBATT. The first step in replacing the battery is to remove the battery cover and press it down while sliding it forward. The battery harness connector should then be connected to the connector. It should be verified that the positive electrode is down and the negative electrode is up. The harness connector should then be wound to match the diagram shown in the Quickpanel user manual. The harness connector should not be allowed to pass over the latch. Finally, the battery cover should be slipped into place, taking care to ensure that the harness connector is not pinched. The 7-inch Quickpanel+ unit weighs about 1.7 pounds and measures 7.56 x 5.39 x 1.42 inches.

GE IC755ACCBATT 提供备用电源 存储器供电

【其他型号推荐】