GE  IC755ACC15PRO  终端的替换屏幕保护膜

【产品详情】

GE Fanuc IC755ACC15PRO 包是一套用于 15 英寸 Quickpanel+ 装置的屏幕保护膜。此包装中有 3 个屏幕保护膜。

IC755ACC15PRO包是一套用于 GE 15 英寸 Quickpanel+ 终端的替换屏幕保护膜。IC755ACC15PRO包中的屏幕保护膜旨在保护 Quickpanel+ 装置上的敏感触摸屏显示器免受硬物划伤。触摸屏是操作员输入的主要方式，IC755ACC15PRO包中的屏幕保护膜延长了显示器的使用寿命，从而延长了 Quickpanel+ 端子的使用寿命。在使用屏幕保护膜之前，需要取下 Quickpanel+ 屏幕上的保护膜。显示器上还需要清除灰尘和指纹。然后，在将屏幕保护膜应用于显示器之前，需要将屏幕保护膜从IC755ACC15PRO包装中剥离粘合面的背衬。用户应开始在显示器的 1 个角应用屏幕保护膜，然后慢慢将其按下显示器的其余部分。最后，应将绿色固化膜从屏幕保护膜上剥离。

使用 GE Fanuc IC755ACC15PRO屏幕保护膜的 GE Fanuc Quickpanel+ 终端是使用 ARM Cortex A8 微处理器并运行 Windows Embedded Compact 7 操作系统的工业计算机。15 英寸终端配备 1 GB DDR3 SDRAM、512 MB ROM 和 512 KB SRAM。系统中提供了多种通信接口，包括以太网、串行和 USB 接口。QuickPanel+ 装置需要直流电源输入，+12 和 +24 伏直流输入都可用于为系统供电。最大额定功耗为 30 瓦。端子上的框架接地在内部连接到信号接地。端子的工作温度范围为 32 至 131 华氏度。

GE  IC755ACC15PRO  终端的替换屏幕保护膜

【英文介绍】

The GE Fanuc IC755ACC15PRO package is a screen protector for 15-inch Quickpanel+ devices. There are 3 screen protectors in this package.

The IC755ACC15PRO package is a replacement screen protector for GE 15-inch Quickpanel+ terminals. The screen protector in the IC755ACC15PRO package is designed to protect the sensitive touchscreen displays on Quickpanel+ devices from scratches from hard objects. The touch screen is the primary means of operator input, and the screen protector in the IC755ACC15PRO package extends the life of the display, thereby extending the life of the Quickpanel+ terminals. Before using the screen protector, you need to remove the screen protector from the Quickpanel+ screen. The monitor also needs to be cleaned of dust and fingerprints. Then, before applying the screen protector to the display, the screen protector needs to be stripped of the adhesive backing from the IC755ACC15PRO packaging. The user should start by applying the screen protector on 1 corner of the display and then slowly press it down on the rest of the display. Finally, the green curing film should be removed from the screen protective film.

The GE Fanuc Quickpanel+ terminal using the GE Fanuc IC755ACC15PRO screen protector is an industrial computer using an ARM Cortex A8 microprocessor and running the Windows Embedded Compact 7 operating system. The 15-inch terminal comes with 1 GB DDR3 SDRAM, 512 MB ROM, and 512 KB SRAM. The system provides a variety of communication interfaces, including Ethernet, serial and USB interfaces. QuickPanel+ devices require DC power input, and both +12 and +24 volt DC inputs can be used to power the system. The maximum rated power consumption is 30 watts. The frame ground on the terminal is internally connected to the signal ground. The operating temperature range of the terminals is 32 to 131 degrees Fahrenheit.

【其他型号推荐】