GE IC755ACC12GAS 操作界面模块的替换垫片 外部结构

【产品详情】

 GE Fanuc IC755ACC12GAS 替换垫片是一种为 Quickpanel 设备提供保护的垫片。它还提供安装夹，以便可以适应不同的安装表面。

IC755ACC12GAS垫片是GE Fanuc制造的用于Quickpanel+操作界面模块的替换垫片。该垫圈旨在为 Quickpanel+ 模块提供坚固的外部结构，以便可以将其安装到不同的面板和结构中。该垫圈包含在附件目录中，可以作为原装垫片的替代品进行安装。建议采取某些步骤来延长 GE Fanuc IC755ACC12GAS更换垫圈的使用寿命和运行。这些步骤包括将环境条件保持在限制以下，并尽可能不频繁地插入或拆卸面板，以便安装夹保持紧固。推荐温度不得超过 50 摄氏度，相对湿度水平不应超过 85%。

GE Fanuc IC755ACC12GAS 替换垫片使 Quickpanel+ 操作界面模块能够安装在面板或 DIN 导轨上。在插入模块时不要连接任何连接和接线，这一点很重要。需要在垫圈上做一个切口，以便用它所保护的模块填充它，并且需要通过匹配模块的测量值来制作切口，而无需连接。GE Fanuc IC755ACC12GAS更换垫片的退化主要是由于频繁插入和移除模块以及频繁重新拧紧安装夹引起的，并加速了该垫片的降解。如果模块要安装在全新的系统和环境中，建议也更换垫圈以获得全面保护。安装此垫圈的推荐扭矩为 0.5 N-m。

GE IC755ACC12GAS 操作界面模块的替换垫片 外部结构

【英文介绍】

The GE Fanuc IC755ACC12GAS replacement gasket is a gasket that provides protection for Quickpanel devices. It also provides mounting clips so that different mounting surfaces can be adapted.

The IC755ACC12GAS gasket is a replacement gasket manufactured by GE Fanuc for the Quickpanel+ operating interface module. The gasket is designed to provide a robust external structure to the Quickpanel+ module so that it can be installed into different panels and structures. The gasket is included in the accessory catalog and can be installed as a replacement for the original gasket. Certain steps are recommended to extend the service life and operation of GE Fanuc IC755ACC12GAS replacement gaskets. These steps include keeping environmental conditions below limits and inserting or removing panels as infrequently as possible so that the mounting clamps remain tight. The recommended temperature should not exceed 50 degrees Celsius and the relative humidity level should not exceed 85%.

The GE Fanuc IC755ACC12GAS replacement gasket enables the Quickpanel+ operating interface module to be mounted on the panel or DIN rail. It is important that you do not attach any connections and wires when inserting the module. A notch needs to be made in the gasket in order to fill it with the module it protects, and the notch needs to be made by matching the measurements of the module without a connection. The degradation of the GE Fanuc IC755ACC12GAS replacement gasket is mainly caused by the frequent insertion and removal of the module and the frequent re-tightening of the mounting clamp, and accelerates the degradation of the gasket. If the module is to be installed in a completely new system and environment, it is recommended to also replace the gasket for full protection. The recommended torque for installing this washer is 0.5N-m.

GE IC755ACC12GAS 操作界面模块的替换垫片 外部结构

【其他型号推荐】