GE IC755ACC10MNT  操作员界面终端 设备连接附件

【产品详情】

 GE Fanuc IC755ACC10MNT附件套件包括多个安装和设备连接附件。这些附件可在 Quickpanel 操作界面端子上实现正确连接。

IC755ACC10MNT套件是由 GE Fanuc 设计的附件套件，用于 Quickpanel+ 操作员界面终端，特别是带有 10 英寸屏幕的终端。该套件包括将操作员界面端子安装在适当表面上的必要部件。该套件中包含的一些部件是安装夹。这些夹子有助于将操作界面安装到垫圈上和将要安装的表面上，以便开始操作。GE Fanuc IC755ACC10MNT附件套件还包括一个电源连接器和一个串行端口连接器。串行端口连接器由一根与 RS-232 端口连接的电缆组成，该电缆是 Tyco electronics 1-284539-0 电缆，其配对连接器是 Tyco Electronics 1-284510-0 连接器。此连接器是 5 针连接器，操作员界面上的 RS-232 端口是 COM1。

GE Fanuc IC755ACC10MNT 附件套件随附一根 24 伏直流 3 针电源连接器电缆。通过该电缆，操作界面应连接到其各自的电源。电源连接器是 30 至 14 AWG 电线。该电缆的额定温度为 75 摄氏度，并且与 USB 键盘和鼠标兼容。GE Fanuc IC755ACC10MNT 附件套件仅包括一组安装夹、一个串行端口连接器和一个电源连接器。此外，所有这些附件对于安装任何操作界面都是必不可少的，并且是确保其正确使用所必需的。温度范围必须保持在 50 摄氏度以下，相对湿度水平必须保持在 80% 以下。

GE IC755ACC10MNT  操作员界面终端 设备连接附件

【英文介绍】

The GE Fanuc IC755ACC10MNT Accessory Kit includes multiple mounting and device connection accessories. These accessories connect correctly on the Quickpanel operating interface terminals.

The IC755ACC10MNT kit is an accessory kit designed by GE Fanuc for use with Quickpanel+ Operator interface terminals, especially those with 10-inch screens. The kit includes the necessary parts to mount the operator interface terminals on the appropriate surface. Some of the parts included in the kit are mounting clips. These clamps help to mount the operating interface to the gasket and to the surface to be installed in order to begin operation. The GE Fanuc IC755ACC10MNT accessory kit also includes a power connector and a serial port connector. The serial port connector consists of a cable connected to the RS-232 port, which is the Tyco electronics 1-284539-0 cable, and its pairing connector is the Tyco Electronics 1-284510-0 connector. This connector is a 5-pin connector, and the RS-232 port on the operator interface is COM1.

The GE Fanuc IC755ACC10MNT accessory kit comes with a 24-volt DC 3-pin power connector cable. Through this cable, the operating interface should be connected to its respective power supply. The power connector is 30 to 14 AWG wire. The cable is rated at 75 degrees Celsius and is compatible with a USB keyboard and mouse. The GE Fanuc IC755ACC10MNT accessory Kit consists only of a set of mounting clips, a serial port connector, and a power connector. In addition, all of these accessories are essential for the installation of any operating interface and are necessary to ensure its proper use. The temperature range must be kept below 50 degrees Celsius and the relative humidity level must be kept below 80 percent.

GE IC755ACC10MNT  操作员界面终端 设备连接附件

【其他型号推荐】