GE IC755ACC10GAS 替换垫片 操作员界面端子的模块

【产品详情】

GE Faunc IC755ACC10GAS 替换垫片专为 10 英寸 Quickpanel+ 端子而设计。它是一种提供支撑并能够正确安装端子的结构。

IC755ACC10GAS垫片是 GE Fanuc 制造的 10 英寸 Quickpanel+ 端子的替换垫片。该垫圈旨在覆盖 Quickpanel+ 操作员界面端子的模块，同时，它用作覆盖屏幕和界面每个端口的结构。原装垫圈预装在操作员界面端子中。某些条件和环境会导致该垫片的退化，这也是更换垫片包含在同一系列中的主要原因。用于 755 英寸 Quickpanel+ 端子的 GE Fanuc IC10ACC10GAS 更换垫圈需要正确安装在位于设备侧面的挡板通道中。需要根据垫圈所保护的端子的尺寸从垫圈上切出空间。面板厚度从 1.6 毫米到 5 毫米不等。

用于 755 英寸 Quickpanel+ 端子的 GE Fanuc IC10ACC10GAS 更换垫圈需要使用顺时针方向拧紧的螺钉进行固定。为避免 GE Fanuc IC755ACC10GAS 10 英寸 Quickpanel+ 端子的更换垫圈退化和磨损，建议避免频繁插入和拆卸面板，并定期检查安装螺钉，因为这些螺钉需要偶尔拧紧。端子需要插入垫圈中，而没有任何连接、电缆或任何其他会阻止其正确安装到垫圈中的连接。还建议将垫圈周围的温度和湿度水平保持在可接受的范围内，以免热和水损坏影响垫圈。

GE IC755ACC10GAS 替换垫片 操作员界面端子的模块

【英文介绍】

GE Faunc IC755ACC10GAS replacement gaskets are designed for use with 10-inch Quickpanel+ terminals. It is a structure that provides support and enables the proper installation of terminals.

The IC755ACC10GAS gasket is a replacement gasket for the 10-inch Quickpanel+ terminal manufactured by GE Fanuc. The washer is designed to cover the module of the Quickpanel+ operator interface terminal, and at the same time, it serves as a structure to cover each port of the screen and interface. The original washer is pre-installed in the operator interface terminal. Certain conditions and environments can lead to the degradation of the gasket, which is the main reason for replacing the gasket included in the same series. The GE Fanuc IC10ACC10GAS replacement gasket for the 755 "Quickpanel+ terminals needs to be properly installed in the baffle channel located on the side of the unit. Space needs to be cut from the washer according to the size of the terminal protected by the washer. Panel thicknesses range from 1.6 mm to 5 mm.

GE Fanuc IC10ACC10GAS Replacement washers for 755 "Quickpanel+ terminals need to be secured using clockwise screws. To avoid degradation and wear of replacement washers for GE Fanuc IC755ACC10GAS 10-inch Quickpanel+ terminals, it is recommended to avoid frequent insertion and removal of panels and to check the mounting screws regularly, as these screws need to be tightened occasionally. The terminals need to be inserted into the gasket without any connection, cable, or any other connection that would prevent it from fitting properly into the gasket. It is also recommended to keep the temperature and humidity levels around the gasket within an acceptable range so that heat and water damage does not affect the gasket.

GE IC755ACC10GAS 替换垫片 操作员界面端子的模块

【其他型号推荐】