GE IC755ACC07MNT 电源连接器 串行端口连接器

【产品详情】

 GE Fanuc IC755ACC07MNT套件是用于 7 英寸 Quickpanel+ 终端的附件套件。它配有电源连接器、串行端口连接器和替换安装夹。

IC755ACC07MNT套件是 GE Fanuc 7 英寸 Quickpanel+ 终端的附件套件。该套件由 GE Fanuc 设计，并包含在 Quickpanel+ 系列中。该套件包括替换安装夹，用于正确安装模块并固定电源和串行端口连接器。端口连接器由一个 5 针连接器组成，该连接器用于 RS-232 UART 接口。该连接器是一个欧式端子，由 Tyco Electronics 284539-5 连接器组成，其配对连接器是 Tyco Electronics 284510 或等效连接器。用于 755 英寸 Quickpanel+ 端子的 GE Fanuc IC07ACC7MNT 附件套件还具有电源连接器。该连接器配有螺丝夹和安装夹。

要为 755 英寸 Quickpanel+ 端子安装 GE Fanuc IC07ACC7MNT 附件套件，请务必确保设备首先完全断电并断开连接。电源线需要固定在配套连接器上，需要注意极性，并且需要拧紧螺丝夹。将电源连接器连接到设备后，即可应用直流电源。用于 755 英寸 Quickpanel+ 端子的 GE Fanuc IC07ACC7MNT 附件套件用于原始电缆因日常操作而退化或为了获得确保安全操作的新连接器。电源连接器具有 24 伏直流接口。整个系统的环境工作温度额定值高达50摄氏度。必须避免过热。该套件可以从 GE Fanuc 订购，部件号为“IC755ACC07MNT”。

GE IC755ACC07MNT 电源连接器 串行端口连接器

【英文介绍】

The GE Fanuc IC755ACC07MNT kit is an accessory kit for 7-inch Quickpanel+ terminals. It comes with a power connector, serial port connector, and replacement mounting clip.

The IC755ACC07MNT kit is an accessory kit for the GE Fanuc 7-inch Quickpanel+ terminal. The kit was designed by GE Fanuc and is included in the Quickpanel+ series. The kit includes replacement mounting clips for properly mounting the module and securing the power and serial port connectors. The port connector consists of a 5-pin connector for the RS-232 UART interface. The connector is a European terminal consisting of a Tyco Electronics 284539-5 connector with a pairing connector of a Tyco Electronics 284510 or equivalent connector. The GE Fanuc IC07ACC7MNT accessory kit for 755 "Quickpanel+ terminals also has a power connector. The connector is equipped with screw clips and mounting clips.

To install the GE Fanuc IC07ACC7MNT attachment Kit for the 755 "Quickpanel+ terminals, be sure that the device is first fully powered off and disconnected. The power cable needs to be fixed on the matching connector, pay attention to the polarity, and tighten the screw clamp. Once the power connector is connected to the device, DC power can be applied. The GE Fanuc IC07ACC7MNT accessory kit for 755 "Quickpanel+ terminals is used when the original cable is degraded due to routine operation or in order to obtain a new connector that ensures safe operation. The power connector has a 24 volt DC interface. The ambient operating temperature of the entire system is rated up to 50 degrees Celsius. Overheating must be avoided. The kit can be ordered from GE Fanuc with the part number "IC755ACC07MNT".

GE IC755ACC07MNT 电源连接器 串行端口连接器

【其他型号推荐】