GE IC754VSL06CTD 彩色触摸屏终端 操作系统

【产品详情】

IC754VSL06CTD是由GE（通用电气）制造的操作界面。它是作为 QuickPanel+ 系列的一部分构建的。它是一款基于一体机的7英寸宽屏TFT彩色触摸屏终端。屏幕采用800 x 480像素WVGA分辨率设计，并具有LED背光显示屏。

IC754VSL06CTD是由GE（通用电气）制造的操作界面。它是作为 QuickPanel+ 系列的一部分构建的。它是一款基于一体机的7英寸宽屏TFT彩色触摸屏终端。屏幕采用800 x 480像素WVGA分辨率设计，并具有LED背光显示屏。它是投射电容式触摸屏。IC754VSL06CTD HMI（人机界面）用作工业控制系统的接口。它非常灵活，具有高级通信选项。在面板上运行整个系统的微处理器是ARM 1GHz Cortex A8 - Freescale i.MX535。这款小型面板的内存容量为 512MB RAM 内存、512 KB SRAM 内存（带备用电池）和 256MB ROM 内存。

GE IC754VSL06CTD终端安装了Microsoft Windows 7 Embedded Compact（32位）操作系统。要对要在面板上使用的应用程序进行编程，用户必须获得 Proficy View Machine Edition 软件（Proficy Machine Edition 的一部分）。要连接程序下载，请使用 RS232/RS485 通信端口和 HMI-CAB 通信电缆。用户还可以通过闪存卡端口（SD 卡）访问面板进行编程。将程序复制到 SD 卡上，然后将卡放入 SD 卡插槽并重新启动设备。当IC754CBL06CTD连接到 15 伏直流电源时，它的最大功耗为 24 瓦。输入电压在 24V DC ±20% 范围内是可接受的。位于输入端子旁边，有 USB、以太网和 RS-232 连接器。该终端安装在 IP65 等级的外壳中，尺寸为 7.56 × 5.39 × 1.42 英寸（192 × 137 × 36 毫米）。该商品的重量约为 0.800 千克（1.76 磅）。此 HMI 应在 0 至 50 摄氏度的温度下使用。

GE IC754VSL06CTD 彩色触摸屏终端 操作系统

【英文介绍】

The IC754VSL06CTD is an operating interface manufactured by GE (General Electric). It is built as part of the QuickPanel+ series. It is an all-in-one 7-inch widescreen TFT color touch screen terminal. The screen is designed with 800 x 480 pixel WVGA resolution and features an LED-backlit display.

The IC754VSL06CTD is an operating interface manufactured by GE (General Electric). It is built as part of the QuickPanel+ series. It is an all-in-one 7-inch widescreen TFT color touch screen terminal. The screen is designed with 800 x 480 pixel WVGA resolution and features an LED-backlit display. It is projected capacitive touch screen. IC754VSL06CTD HMI (Human Machine Interface) is used as an interface for industrial control systems. It is very flexible with advanced communication options. The microprocessor that runs the entire system on the panel is the ARM 1GHz Cortex A8-Freescale i.MX535. The small panel comes with 512MB RAM, 512KB SRAM (with a spare battery), and 256MB ROM.

The GE IC754VSL06CTD terminal is installed with the Microsoft Windows 7 Embedded Compact (32-bit) operating system. To program the application to be used on the panel, the user must obtain the Proficy View Machine Edition software (part of Proficy Machine Edition). To connect the program download, use the RS232/RS485 communication port and the HMI-CAB communication cable. Users can also access the panel for programming through the flash memory card port (SD card). Copy the program to the SD card, then put the card into the SD card slot and restart the device. When the IC754CBL06CTD is connected to a 15-volt DC supply, it has a maximum power consumption of 24 watts. The input voltage is acceptable in the range of 24V DC ±20%. Located next to the input terminals, USB, Ethernet, and RS-232 connectors are available. The terminal is housed in an IP65-rated housing and measures 7.56 x 5.39 x 1.42 inches (192 x 137 x 36 mm). The product weighs about 0.800 kilograms (1.76 pounds). This HMI should be used at temperatures between 0 and 50 degrees Celsius.

GE IC754VSL06CTD 彩色触摸屏终端 操作系统

【其他型号推荐】