GE IC754VBF12CTD 电阻式触摸屏界面

【产品详情】

 通用电气 （GE） FANUC IC754VBF12CTD 是一款 QuickPanel View/Control 操作终端，配备 12 英寸彩色薄膜晶体管 （TFT） 屏幕和电阻式触摸屏界面。它带有 65k 色，每像素 16 位，分辨率为 800 x 600。该终端还具有不可更换的冷阴极荧光 （CCFL） 背光，额定半衰期为 50,000 小时，亮度为 400 尼特，触摸屏附近有 LED 状态指示灯。

通用电气 （GE） FANUC IC754VBF12CTD 是一款 QuickPanel View/Control 操作终端，配备 12 英寸彩色薄膜晶体管 （TFT） 屏幕和电阻式触摸屏界面。它带有 65k 色，每像素 16 位，分辨率为 800 x 600。该终端还具有不可更换的冷阴极荧光 （CCFL） 背光，额定半衰期为 50,000 小时，亮度为 400 尼特，触摸屏附近有 LED 状态指示灯。IC754VBF12CTD使用时钟速度为 400 MHz 的 XScale 处理器，可以使用 Proficy View-Machine Edition 软件进行配置。

IC754VBF12CTD终端上的存储器由64 MB的板载闪存、64 MB的DRAM、512 KB的SRAM和512 KB的引导加载程序ROM组成。如需额外的内存，建议使用目录号为 IC512ACC754MEM 的可选 0512 MB CompactFlash 卡，因为 CompactFlash 内存插槽是可同时支持 3.3V 和 5V 卡的 I/II 型插槽。IC754VBF12CTD终端上的其他端口包括 2 个 USB 1.1 端口、1 个 RS-232 端口、1 个 RS-485 端口和 1 个 10/100 以太网端口。请注意，此终端上使用的操作系统是 Microsoft Windows CE，它是 32 位操作系统。IC754VBF12CTD端子的输入电压为 12 至 24V DC，在 30 ms 时具有 -10% 的标称输入电压功率压降容差。它还具有 NEMA 4/4X 型外壳等级，应在温度范围为 0 至 50 °C 的位置运行，并在 -20 至 70 °C 的室温下储存。大约运输重量和尺寸分别为 10 磅和 16 x 14 x 8 英寸。

GE IC754VBF12CTD 电阻式触摸屏界面

【英文介绍】

The General Electric (GE) FANUC IC754VBF12CTD is a QuickPanel View/Control operator terminal with a 12-inch color thin-film transistor (TFT) screen and a resistive touchscreen interface. It comes with 65k colors, 16 bits per pixel, and a resolution of 800 x 600. The terminal also features a non-replaceable cold cathode fluorescence (CCFL) backlight with a rated half-life of 50,000 hours, a brightness of 400 nits, and an LED status indicator near the touch screen.

The General Electric (GE) FANUC IC754VBF12CTD is a QuickPanel View/Control operator terminal with a 12-inch color thin-film transistor (TFT) screen and a resistive touchscreen interface. It comes with 65k colors, 16 bits per pixel, and a resolution of 800 x 600. The terminal also features a non-replaceable cold cathode fluorescence (CCFL) backlight with a rated half-life of 50,000 hours, a brightness of 400 nits, and an LED status indicator near the touch screen. The IC754VBF12CTD uses an XScale processor with a clock speed of 400 MHz and can be configured using Proficy View-Machine Edition software.

The memory on the IC754VBF12CTD terminal consists of 64 MB of on-board flash memory, 64 MB of DRAM, 512 KB of SRAM, and 512 KB of boot loader ROM. For additional memory, the optional 0512 MB CompactFlash card with directory number IC512ACC754MEM is recommended, as the CompactFlash memory slot is a type I/II slot that can support both 3.3V and 5V cards. Other ports on the IC754VBF12CTD terminal include two USB 1.1 ports, one RS-232 port, one RS-485 port, and one 10/100 Ethernet port. Please note that the operating system used on this terminal is Microsoft Windows CE, which is a 32-bit operating system. The IC754VBF12CTD terminal has an input voltage of 12 to 24V DC with a nominal input voltage power drop tolerance of -10% at 30 ms. It also has a NEMA type 4/4X housing grade and should operate in a temperature range of 0 to 50 °C and be stored at room temperature of -20 to 70 °C. Approximate shipping weight and dimensions are 10 pounds and 16 x 14 x 8 inches, respectively.

GE IC754VBF12CTD 电阻式触摸屏界面

【其他型号推荐】