GE IC697PWR724 电源模块 提供不同的电压

【产品详情】

技术规格

额定电压： 24 伏直流电

输入电压范围： 18 至 32 VDC

输入功率： 满载时 160 瓦

输出功率 90 瓦

底板上的位置： 最左边的插槽

直流输出： +5VDC、+12 VDC、-12 VDC

IC697PWR724模块是由GE Fanuc Automation设计、制造和分销的电源模块。该电源模块可在 24 伏直流电压和 90 瓦的输出功率下运行。该模块的设计使其能够插入机架，特别是在其最左侧的插槽上。该模块通过机架上的 48 针背板安装连接器连接。该电源模块提供不同的电压，以适应操作和逻辑电平排序信号。GE Fanuc Automation IC697PWR724电源模块可以在单个机架应用中运行，并且可以同时为 2 个机架供电。总负载必须在额定规格范围内，并且通过电缆与第二个机架互连。

GE Fanuc Automation IC697PWR724 电源模块的额定电压为 24 伏直流电，可接受 18 至 32 伏直流电的输入电压范围。该模块还具有过压和过流保护功能。如果模块在温度高于 60 摄氏度的环境中使用，则可能需要对其进行降级。GE Fanuc Automation IC697PWR724电源模块的额定输入功率为 160 瓦，输入浪涌能量额定值最大为 22 焦耳。它还具有 10 毫秒的穿越时间，在 20 伏直流电下。输出电压可以是 5、12 或 -12 伏直流电，特定额定电流分别为 26、4 或 2 安培。此电源模块可与 VME 集成机架一起使用。

客户问答

问题：什么是IC697PWR724？答：IC697PWR724是GE Fanuc 24-90系列的90 VDC、70W电源模块。

问：本机插入哪里？ 答： 此机架安装单元可直接插入机架最左侧插槽中的 48 针背板安装连接器。

问题：它提供什么功能？ 答： 它提供 +5 V、+12 V 和 -12 V 电源（以及向背板提供逻辑电平排序信号）。

问：此装置能否仅为单个机架应用供电？ 答： 不。是的，该装置可以为单个机架应用供电，但也可用于为第二个机架供电（只要总负载在额定电源范围内）。

问：与第二个机架的互连是通过什么？ 答： 它是通过预先接线的电缆（如IC697CBL700）。

问：IC697PWR724 提供了哪些功能？ 答：

在 24 VDC 下运行

3 种输出电压（总计 90W）：+5 VDC 输出高达 18 安培，+12 VDC 输出高达 1.5 安培，-12 VDC 输出高达 1 安培

滑入式机架安装结构

在 5 V 总线上提供电子短路过流保护

2 个机架操作，采用单个电源

问题：如果我的IC697PWR724无法正常工作，我的下一步应该是什么？ 答： 您的IC697PWR724可能需要维修。

有关 GE Fanuc 697-724 系列的 IC24PWR90 90 VDC、70W 电源模块的更多信息，请参阅数据表用户手册。

GE IC697PWR724 电源模块 提供不同的电压

【英文介绍】

Technical specification

Rated voltage: 24 volts DC

Input voltage range: 18 to 32 VDC

Input power: 160 watts at full load

The output power is 90 watts

Location on the bottom plate: leftmost slot

Dc output: +5VDC, +12 VDC, -12 VDC

The IC697PWR724 module is a power module designed, manufactured and distributed by GE Fanuc Automation. The power module can operate at 24 volts DC and 90 watts of output power. The module is designed so that it can be inserted into the rack, especially on its leftmost slot. The module is connected via a 48-pin backplane mounting connector on the rack. The power supply module offers different voltages to accommodate operational and logic level sequencing signals. The GE Fanuc Automation IC697PWR724 power module can operate in a single rack application and can power 2 racks at the same time. The total load must be within the rated specification and connected to the second rack by cable.

GE Fanuc Automation IC697PWR724 Power supply modules are rated at 24 volts DC and can accept input voltage ranges from 18 to 32 volts DC. The module also has overvoltage and overcurrent protection functions. If the module is used in an environment with temperatures higher than 60 degrees Celsius, it may need to be degraded. The GE Fanuc Automation IC697PWR724 power module has a rated input power of 160 watts and an input surge energy rating of up to 22 joules. It also has a 10 millisecond crossing time at 20 volts direct current. The output voltage can be 5, 12 or -12 volts DC, with specific current ratings of 26, 4 or 2 amps, respectively. This power module can be used with the VME integrated rack.

Customer question and answer

Question: What is IC697PWR724? A: The IC697PWR724 is a 90 VDC, 70W power module of the GE Fanuc 24-90 series.

Q: Where to insert the machine? A: The rack mounting unit plugs directly into the 48-pin backplane mounting connector in the left-most slot of the rack.

Q: What does it offer? A: It provides +5 V, +12 V, and -12 V power supplies (as well as a logic level ordering signal to the backplane).

Q: Can this unit power only a single rack application? A: No. Yes, the unit can power a single rack application, but it can also be used to power a second rack (as long as the total load is within the rated power supply range).

Q: What is the interconnect with the second rack? A: It is via a pre-wired cable (e.g. IC697CBL700).

Q: What features does the IC697PWR724 provide? A:

Operates at 24 VDC

3 output voltages (total 90W) : +5 VDC output up to 18 amps, +12 VDC output up to 1.5 amps, and -12 VDC output up to 1 amp

Slide-in rack mount structure

Provides electronic short-circuit overcurrent protection on the 5 V bus

2 rack operation with a single power supply

Question: If my IC697PWR724 is not working properly, what should be my next step? A: Your IC697PWR724 may need repair.

For more information about the GE Fanuc 697-724 series IC24PWR90 90 VDC, 70W power supply module, please refer to the Datasheet User manual.

GE IC697PWR724 电源模块 提供不同的电压

【其他型号推荐】