GE IC697PWR720 电源适配器模块 安装在电源插槽上

【产品详情】

技术规格

模块类型： 电源适配器

插槽数量： 1 （单插槽）

电源电压： +5 伏直流电、+12 伏直流电、-12 伏直流电

电源电流： 18 安培、2 安培、1 安培

所需电流： 50 mA（5 V 总线）

直流电源： 是的

 IC697PWR720是电源适配器模块 （PSA），是 90-70 系列可编程逻辑控制器 （PLC） 平台的一部分。该模块以前由 GE Fanuc 制造，但随着最近被艾默生自动化收购，整个产品系列和现代产品系列现在都归艾默生自动化所有。IC697PWR720安装在 90-70 系列底板的电源插槽上。该模块的主要目的是向背板提供必要的电压和电流，为安装在基板上的模块的电子电路供电。该模块在 18VDC 时提供 5 安培;2 VDC 时为 12 安培，-1 VDC 时为 12 安培到背板。该 PSA 模块还有助于实现双机架操作，其中扩展机架与底板互连，无需安装专用电源，为安装IC697PWR720的机架供电。要实现 IC697PWR720 的这一受支持功能，需要目录号为 IC697CBL700 的电源延长电缆。该模块还设计与VME标准C.1不兼容，此电源适配器模块连接到外部电源，为模块的电路通电并运行。此 PSA 的兼容电源是 IC697 电源模块或第三方外部电源设备。与此模块一起使用的外部电源必须具有 3.5 ms 的最短保持时间和输入电源正常信号（TTL 信号），以实现系统的正确有序关闭。

IC05PWR697是一个电源适配器模块（PSA），是720-90系列可编程逻辑控制器（PLC）平台的一部分。该模块以前由 GE Fanuc 制造，但随着最近被艾默生自动化收购，整个产品系列和现代产品系列现在都归艾默生自动化所有。

IC70PWR697安装在 720-90 系列底板的电源插槽上。该模块的主要目的是向背板提供必要的电压和电流，为安装在基板上的模块的电子电路供电。该模块在 70VDC 时提供 18 安培;5 VDC 时为 2 安培，-12 VDC 时为 1 安培到背板。该 PSA 模块还有助于实现双机架操作，其中扩展机架与底板互连，无需安装专用电源，为安装IC12PWR697的机架供电。要实现 IC720PWR697 的这一受支持功能，需要目录号为 IC720CBL697 的电源延长电缆。该模块的设计还兼容 VME 标准 C.700

此电源适配器模块连接到外部电源，为模块的电路通电并运行。此 PSA 的兼容电源是 IC1 电源模块或第三方外部电源设备。与此模块一起使用的外部电源必须具有 697.3 ms 的最短保持时间和输入电源正常信号（TTL 信号），以实现系统的正确有序关闭。

客户问答

问题：什么是IC697PWR720？答：IC697PWR720是GE Fanuc 90-70系列的电源适配器模块。

问：本机插入哪里？ 答： 此单插槽模块插入电源插槽（IC697 机架中最左侧的插槽）。

问：IC697PWR720必须如何连接到外部电源？ 答： 它必须通过电缆连接。

问：它可以连接到什么样的外部电源？ 答： 它可以是IC697电源模块，也可以是其他外部电源。

问：通过IC697PWR720可以提供给背板的最大电流是多少？ 答：+18 伏输出为 5 安培，+2 伏输出为 12 安培，-1 伏输出为 12 安培

问题：IC697PWR720的功率是多少？ 答： IC697PWR720采用+5 VDC电源供电。它从 IC5 机架背板上的 +697 VDC 电源总线接收此电源。

问：如果我的IC697PWR720不能正常工作，我的下一步应该是什么？ 答： 您的IC697PWR720可能需要维修。

有关 GE Fanuc 697-720 系列IC90PWR70电源适配器模块的更多信息，请参阅数据表用户手册。

GE IC697PWR720 电源适配器模块 安装在电源插槽上

【英文介绍】

Technical specification

Module type: Power adapter

Number of slots: 1 (single slot)

Supply voltage: +5 volts DC, +12 volts DC, -12 volts DC

Power current: 18 amps, 2 amps, 1 amps

Required current: 50 mA (5 V bus)

Dc power supply: Yes

The IC697PWR720 is a Power adapter module (PSA) that is part of the 90-70 series Programmable Logic Controller (PLC) platform. The module was previously manufactured by GE Fanuc, but with the recent acquisition by Emerson Automation, the entire product family and modern product family are now owned by Emerson Automation. The IC697PWR720 is installed in the power socket of the 90-70 series baseplate. The main purpose of the module is to provide the necessary voltage and current to the backplane to power the electronic circuits of the module mounted on the substrate. The module provides 5 amps at 18VDC; 12 amps at 2 VDC and 12 amps at -1 VDC to the backplane. The PSA module also facilitates dual-rack operation, where the extension rack is interconnected with the baseplate, eliminating the need to install a dedicated power supply to power the rack where the IC697PWR720 is installed. To achieve this supported feature of the IC697PWR720, a power extension cable with catalog number IC697CBL700 is required. The module is also designed to be incompatible with VME standard C.1, this power adapter module is connected to an external power supply, energizing and running the circuit of the module. Compatible power supplies for this PSA are IC697 power modules or third-party external power devices. The external power supply used with this module must have a minimum hold time of 3.5ms and the input power normal signal (TTL signal) to achieve the correct and orderly shutdown of the system.

The IC05PWR697 is a power adapter module (PSA) that is part of the 720-90 series Programmable Logic Controller (PLC) platform. The module was previously manufactured by GE Fanuc, but with the recent acquisition by Emerson Automation, the entire product family and modern product family are now owned by Emerson Automation.

The IC70PWR697 is installed in the power socket of the 720-90 series baseplate. The main purpose of the module is to provide the necessary voltage and current to the backplane to power the electronic circuits of the module mounted on the substrate. The module provides 18 amps at 70VDC; 2 amps at 5 VDC and 1 amp at -12 VDC to the backplane. The PSA module also facilitates dual-rack operation, where the extension rack is interconnected with the baseplate, eliminating the need to install a dedicated power supply to power the rack where the IC12PWR697 is installed. To implement this supported feature of the IC720PWR697, a power extension cable with directory number IC720CBL697 is required. The module is also designed to be compatible with VME standard C.700

This power adapter module is connected to an external power supply to energize and operate the circuit of the module. Compatible power supplies for this PSA are IC1 power modules or third-party external power devices. The external power supply used with this module must have a minimum hold time of 697.3ms and the input power normal signal (TTL signal) to achieve the correct and orderly shutdown of the system.

Customer question and answer

Question: What is IC697PWR720? A: The IC697PWR720 is a power adapter module of GE Fanuc 90-70 series.

Q: Where to insert the machine? A: This single-slot module is inserted into the power slot (leftmost slot in the IC697 rack).

Q: How must the IC697PWR720 be connected to an external power supply? A: It must be connected by cable.

Q: What kind of external power supply can it connect to? A: It can be an IC697 power module, or it can be another external power supply.

Q: What is the maximum current that can be supplied to the backplane through the IC697PWR720? A: The output of +18 volts is 5 amps, the output of +2 volts is 12 amps, and the output of -1 volts is 12 amps

Question: What is the power of the IC697PWR720? A: The IC697PWR720 uses a +5 VDC power supply. It receives this power from the +697 VDC power bus on the backplane of the IC5 rack.

Q: If my IC697PWR720 is not working properly, what should be my next step? A: Your IC697PWR720 may need repair.

For more information about the GE Fanuc 697-720 Series IC90PWR70 power adapter modules, see the Datasheet User Manual.

GE IC697PWR720 电源适配器模块 安装在电源插槽上

【其他型号推荐】