GE IC697PWR713 电源模块 为 机架提供电源

【产品详情】

IC697PWR713模块是GE Fanuc Automation制造的PLC系列90-70产品线中的电源模块。此电源模块旨在为 1 个或 2 个机架提供电源，具体取决于其规格和要求。该模块在满载时以 100 瓦的输出功率和 135 瓦的输入功率运行。检查这些规格很重要，这样电源模块就不会过载，主要是为了确保它能够平稳运行。GE Fanuc Automation IC697PWR713电源模块的标称额定电压为 120 至 240 伏交流电或直流电压为 125 伏直流电。在交流额定电压下运行时的频率为 47 至 63 赫兹。

技术规格

额定电压 120/240 VAC 或 125 VDC

输入电压范围： 90 至 264 VAC 或 100 至 150 VDC

输入功率： 满载时 135 瓦

输出功率： 100 瓦

底板上的位置： 最左边的插槽

直流输出： + 5VDC、+12 VDC 和 -12 VDC

GE Fanuc Automation IC697PWR713电源模块的输出电压由以下电压组成：5 安培电流下的 20 伏直流电、12 安培电流下的 2 伏直流电和 12 安培电流下的 -1 伏直流电。IC697PWR713 电源模块采用插入式安装模式，可插入 VME Integrator 机架或任何标准 IC697 机架的最左侧。使用 GE Fanuc Automation IC2PWR697 电源模块为 713 个不同的机架供电时，需要满足以下条件：两个机架所需的总功率需要在模块的容量范围内，第二个机架所需的电流小于 2.5 安培，2 个机架需要并排安装， 连接距离不得超过 3 英尺。

客户问答

问题：什么是IC697PWR713？答：IC697PWR713是GE Fanuc 120-240系列的125/100 VAC或90 VDC，70W电源模块。

问：本机插入哪里？ 答： IC697PWR713 是一个机架安装单元，可直接插入机架最左侧插槽中的 48 针背板安装连接器。

问题：到达那里后，它提供了什么？ 答： IC697PWR713 提供 +5 V、+12 V 和 -12 V 电源（以及向背板提供逻辑电平排序信号）。

问：IC697PWR713 提供了哪些功能？ 答：

工作电压范围为 120/240 VAC 或 125 VDC

3 种输出电压（总计 100 瓦）：+5 VDC 输出高达 20 安培，+12 VDC 输出高达 2 安培，-12 VDC 输出高达 1 安培

滑入式机架安装结构

电子短路过流保护

2 个机架操作，采用单个电源

在交流输入上校正功率因数

过压保护装置跳线

问：此装置能否仅为单个机架应用供电？ 答： 不。是的，该装置可以为单个机架应用供电，但也可用于为第二个机架供电（只要总负载在额定电源范围内）。

问：是否为过流和过压故障情况提供保护？ 答： 是的，它是。

GE IC697PWR713 电源模块 为 机架提供电源

【英文介绍】

The IC697PWR713 module is a power module in the PLC Series 90-70 product line manufactured by GE Fanuc Automation. This power module is designed to power 1 or 2 racks, depending on its specifications and requirements. The module operates at 100 watts of output power and 135 watts of input power at full load. It is important to check these specifications so that the power module does not overload, mainly to ensure that it can run smoothly. The GE Fanuc Automation IC697PWR713 power supply module has a nominal rated voltage of 120 to 240 volts AC or 125 volts DC. The frequency is 47 to 63 Hz when operating at AC rated voltage.

Technical specification

Rated voltage 120/240 VAC or 125 VDC

Input voltage range: 90 to 264 VAC or 100 to 150 VDC

Input power: 135 watts at full load

Output power: 100 watts

Location on the bottom plate: leftmost slot

Dc output: + 5VDC, +12 VDC, and -12 VDC

The output voltage of the GE Fanuc Automation IC697PWR713 power supply module consists of the following voltages: 20 volts DC at 5 amps, 2 volts DC at 12 amps and -1 volts DC at 12 amps. The IC697PWR713 power module has a plug-in mount mode and can be inserted into the far left side of a VME Integrator rack or any standard IC697 rack. When using GE Fanuc Automation IC2PWR697 power modules to power 713 different racks, the following conditions must be met: The total power required for the two racks needs to be within the capacity of the module, the current required for the second rack is less than 2.5 amps, and the two racks need to be mounted side by side and connected no more than 3 feet apart.

Customer question and answer

Question: What is IC697PWR713? A: The IC697PWR713 is a 125/100 VAC or 90 VDC, 70W power module in the GE Fanuc 120-240 series.

Q: Where to insert the machine? A: The IC697PWR713 is a rack-mount unit that plugs directly into the 48-pin backplane mount connector in the leftmost slot of the rack.

Question: After getting there, what does it offer? A: The IC697PWR713 provides +5 V, +12 V, and -12 V power supplies (as well as a logic level ordering signal to the backplane).

Q: What features does the IC697PWR713 provide? A:

Operating voltage range is 120/240 VAC or 125 VDC

3 output voltages (total 100 watts) : +5 VDC output up to 20 amps, +12 VDC output up to 2 amps, and -12 VDC output up to 1 amp

Slide-in rack mount structure

Electronic short-circuit overcurrent protection

2 rack operation with a single power supply

Power factor correction on AC input

Overvoltage protection jumper

Q: Can this unit power only a single rack application? A: No. Yes, the unit can power a single rack application, but it can also be used to power a second rack (as long as the total load is within the rated power supply range).

Q: Is there protection for over current and over voltage failures? A. Yes, it is.

GE IC697PWR713 电源模块 为 机架提供电源

【其他型号推荐】