GE Fanuc  IC697MDL651 分立式输入模块 控制器单元

【产品详情】

IC697MDL651模块是一种分立式输入模块，适用于工业系统，由各种在高电平上运行的组件构成。该模块由 GE Fanuc 生产，旨在与 90-70 系列的可编程控制器单元一起使用。IC697MDL651模块具有完全独立的TTL兼容输入点，并配有滤波器选项。用户可以根据应用要求选择值为 1 毫秒或 10 毫秒的滤波器。除此之外，输入端具有不需要电源的上拉电阻器，并且模块具有 LED 状态指示灯。每个模块有 32 个输入可用，使用的电缆最大长度为 30 米（98.4 英尺）。

技术规格

额定电压： 5 伏直流电

输入数量： 32 个输入（一组）

输入电流： 额定电压下为 1.7 mA

所需电流： 0.53 安培

输入电压范围： -3 至 +7 伏直流电

直流电源： 是的

IC697MDL651模块需要 5 伏直流电的电压，其电压范围为 -3 至 7 伏直流电。除此之外，该模块的输入特性包括 5.9 千欧的阻抗和正负 5% 的偏差，以及 -3 至 0.5 伏的导通电压范围。关断状态电压为 2 至 7 伏。IC697MDL651模块在额定电压下的典型导通电流为 1.7 毫安，最大关断电流为 1.1 毫安。该模块需要 0.53 安培的电流，来自 5 伏母线电压，并且根据 VME 标准 （C.1） 设计。IC697MDL651模块的配置可以通过在 Windows 或 MS-DOS 操作系统上运行的软件来实现。配置是通过以太网 TCP/IP 或 SNP 端口完成的。

GE Fanuc  IC697MDL651 分立式输入模块 控制器单元

【英文介绍】

The IC697MDL651 module is a discrete input module for industrial systems, consisting of various components operating at high levels. The module is produced by GE Fanuc and is intended for use with programmable controller units in the 90-70 series. The IC697MDL651 module has a fully independent TTL-compatible input point with filter options. The user can select a filter with a value of 1 millisecond or 10 millisecond depending on the application requirements. In addition to this, the input has a pull-up resistor that does not require power, and the module has an LED status indicator. Each module has 32 inputs available and uses a maximum cable length of 30 meters (98.4 feet).

Technical specification

Rated voltage: 5 volts DC

Number of inputs: 32 inputs (one set)

Input current: 1.7 mA at rated voltage

Required current: 0.53 amps

Input voltage range: -3 to +7 volts DC

Dc power supply: Yes

The IC697MDL651 module requires a voltage of 5 volts DC, which ranges from -3 to 7 volts DC. Among other things, the input characteristics of the module include an impedance of 5.9 kiloohm and a deviation of plus or minus 5%, as well as an on-off voltage range of -3 to 0.5 volts. The off state voltage is 2 to 7 volts. The typical conduction current of the IC697MDL651 module at rated voltage is 1.7 MA and the maximum turn-off current is 1.1 mA. The module requires a current of 0.53 amps from a 5 volt bus voltage and is designed according to the VME standard (C.1). The configuration of the IC697MDL651 module can be achieved by software running on Windows or MS-DOS operating systems. Configuration is done over Ethernet TCP/IP or SNP ports.

GE Fanuc  IC697MDL651 分立式输入模块 控制器单元

【其他型号推荐】