IC697MDL254 分立式输入模块 输入模块

【产品详情】

技术规格

额定电压： 48 伏交流电

输入数量： 32 个输入（4 个隔离组，每组 8 个）

输入电流： 4.7毫安

所需电流： 0.30 安培

频率： 47 至 63 赫兹

直流电源： 不

 IC697MDL254模块是GE Fanuc为90-70系列产品线制造的分立式输入模块。该模块的额定电压为 48 伏交流电，将 32 个点分为 4 个不同的组，每组 8 个点，这意味着每组 8 个点可用于交流电源的单独相位。它具有具有 IEC 标准电流-电压类型 1 特性的电阻输入，可与各种接近开关完美匹配。该模块需要 0 伏背板总线的 3.5 安培电流功率。GE Fanuc IC697MDL254 输入模块具有 LED 指示灯，可显示每个输入点的开/关状态。该模块还具有机械键控功能，可确保正确完成相应模块类型的更换。其他值得注意的特性包括用户可配置的输入和输出基准，不需要 DIP 开关或跳线。

GE Fanuc IC697MDL254输入模块的配置可以通过使用 MS-DOS 配置功能或 Windows 操作系统编程软件来完成。编程软件的配置功能安装在用于编程的设备上。IC697MDL254输入模块与各种限位开关、按钮、选择开关、限位开关以及 2 线或 3 线电子开关兼容。输入电路提供强大的电流，使开关器件能够在导通状态下以约 10 毫安的输入电流提供可靠的操作，并且在关断状态下允许高达 2 毫安的泄漏电流，而无需将其导通。IC697MDL254输入模块的机械键功能可防止未经授权更换特定插槽中的单个模块类型。

IC697MDL254 分立式输入模块 输入模块

【英文介绍】

Technical specification

Rated voltage: 48 volts AC

Number of inputs: 32 inputs (4 isolation groups, 8 per group)

Input current: 4.7 MA

Required current: 0.30 amps

Frequency: 47 to 63 Hz

Dc power supply: No

The IC697MDL254 module is a discrete input module manufactured by GE Fanuc for the 90-70 series product line. The module has a rated voltage of 48 volts AC and divides 32 points into 4 different groups of 8 points each, meaning that each group of 8 points can be used for a separate phase of the AC power supply. It has a resistive input with IEC standard current-voltage type 1 characteristics that perfectly matches a wide range of proximity switches. The module requires 3.5 amps of current power from the 0 volt backplane bus. The GE Fanuc IC697MDL254 input module has an LED indicator that shows the on/off status of each input point. The module also has a mechanical keying function to ensure that the replacement of the corresponding module type is completed correctly. Other notable features include user-configurable input and output benchmarks that do not require DIP switches or jumpers.

The configuration of the GE Fanuc IC697MDL254 input module can be done by using the MS-DOS configuration function or the Windows operating system programming software. The configuration function of programming software is installed on the device used for programming. The IC697MDL254 input module is compatible with a wide range of limit switches, buttons, selectors, limit switches, and 2-wire or 3-wire electronic switches. The input circuit provides a strong current that enables the switching device to provide reliable operation with an input current of about 10 mA in the on state, and to allow leakage currents of up to 2 mA in the off state without having to turn it on. The mechanical key function of the IC697MDL254 input module prevents unauthorized replacement of a single module type in a specific slot.

IC697MDL254 分立式输入模块 输入模块

【其他型号推荐】