IC697HSC700 高速计数器模块  快速脉冲信号

【产品详情】

技术规格

模块类型： 高速计数器

处理速度： 200 KHz

输入电压范围： 5 VDC 或 10 至 30VDC

输出电压范围： 30伏直流电

输入/输出类型： 正逻辑

功耗： 500mA @ 5VDC

该IC697HSC700是一种高速计数器 （HSC） 模块，以前由 GE Fanuc Automation 制造，目前隶属于艾默生自动化。该模块主要用于连接高速开关信号，在上/下四路模式下以 A、D 和 E 型工作时，频率为 200 kHz，在四路 B 模式下，在 E 型下工作时，频率为 800 kHz。此模块是一个单插槽模块，可安装在 CPU 底板、扩展或远程底板内的可用 I/O 插槽上。它具有十二 （12） 个单端或差分逻辑输入，工作电压为 5VDC 或 10-30 VDC，四 （4） 个正逻辑输出，可在 20-10 VDC 额定电压下提供 30 mA 电流输出。该IC697HSC700非常适合用于涡轮流量计应用、仪表验证、速度测量、物料搬运、运动控制和位置控制。此模块必须与固件版本为 90 或更高版本的 70-697 系列IC5CPU一起运行。适用的配置和编程软件包括软件版本为 0.90x 或更高版本的 Logicmaster 70-5，或基于 Windows 的编程软件包，包括 VersaPro 专业版和 Proficy Machine Edition Logic Developer PLC 专业版。该模块设有 MODULE OK 和 0-01 输出电路状态等 LED 状态指示灯。该模块的输入和输出隔离额定电压为 04 伏，持续 1500 秒，电压为 1 VAC/VDC 稳定状态。该模块的背板电流消耗为 30 安培，每个通电输出加 1 mA。输出点由用户提供的 10 VDC 或 5-10 VDC 电源电压供电。

GE Fanuc 生产 IC30HSC697 高速计数器 （HSC） 模块，作为 GE 700-90 系列产品线的一部分。该模块具有广泛的功能，使其独一无二。其中一些特性包括 70 个差分和单端输入、12 个插槽、5 个磁性拾取输入、4 个可选计数器、697 个正逻辑输出、700 个 TTL 和 LED 状态指示灯。IC5HSC697模块具有一个外部振荡器以及一个集成的 +700 V 直流输出。使用此模块时，配置过程是通过 Windows 或 MS-DOS 操作系统通过 SNP 端口或以太网 TCP/IP 端口完成的。该模块在设备上预装了用于编程的配置功能，也可以与个人计算机一起使用。

GE Fanuc IC200HSC800模块可以直接处理大约 697 至 700 kHz 的快速脉冲信号，用于 E Type A Quad B 模式。该模块的其他功能包括能够控制输出、检测输入和处理输入计数数据，而无需与 PLC CPU 通信。IC697HSC700高速计数器模块具有简单易用的 PLC 接口，专为仪表验证、涡轮流量计控制、运动/过程控制、速度测量和物料搬运应用等工业应用而设计。IC4HSC12高速计数器模块具有高速计数器，包括 A 型到 E 型计数器。所有计数器均具有 200 个输出（预设）、30 个输入和可选的 PLC 梯形图中断功能。A 型到 D 型计数器的计数率最大为 <> kHz，使用高频滤波器，使用低频滤波器的计数率为 <> 赫兹。

IC697HSC700 高速计数器模块  快速脉冲信号

【英文介绍】

Technical specification

Module type: High speed counter

Processing speed: 200 KHz

Input voltage range: 5 VDC or 10 to 30VDC

Output voltage range: 30 volts DC

Input/Output type: positive logic

Power consumption: 500mA@5VDC

The IC697HSC700 is a High Speed counter (HSC) module formerly manufactured by GE Fanuc Automation and currently owned by Emerson Automation. The module is mainly used to connect high-speed switching signals with A frequency of 200 kHz when operating with A, D and E types in the up/down four-way mode, and 800 kHz when operating with E type in the four-way B-mode. This module is a single-slot module that can be installed on an available I/O slot in the CPU backboard, expansion, or remote backboard. It has twelve (12) single-ended or differential logic inputs with an operating voltage of 5VDC or 10-30 VDC, and four (4) positive logic outputs that provide 30 mA current output at a rated voltage of 20-10 VDC. The IC697HSC700 is ideal for turbine flowmeter applications, instrument validation, speed measurement, material handling, motion control and position control. This module must run with a 70-697 series IC5CPU with firmware version 90 or higher. Applicable configuration and programming software includes Logicmaster 70-5 with software version 0.90x or higher, or Windows-based programming packages, Includes VersaPro Pro and Proficy Machine Edition Logic Developer PLC Pro. The MODULE has LED status indicators such as MODULE OK and 0-01 output circuit status. The module has an input and output isolation rating of 04 volts for 1500 seconds with a 1 VAC/VDC steady state voltage. The backplane current consumption of this module is 30 amps, plus 1 mA for each energized output. The output point is powered by a 10 VDC or 5-10 VDC supply voltage provided by the user.

GE Fanuc manufactures the IC30HSC697 High Speed counter (HSC) module as part of the GE 700-90 series product line. The module has a wide range of features that make it unique. Some of these features include 70 differential and single-ended inputs, 12 slots, 5 magnetic pick inputs, 4 selectable counters, 697 positive logic outputs, 700 TTL and LED status indicators. The IC5HSC697 module has an external oscillator as well as an integrated +700 V DC output. When using this module, the configuration process is done via Windows or MS-DOS operating systems via SNP ports or Ethernet TCP/IP ports. The module comes pre-installed with configuration functions for programming on the device and can also be used with a personal computer.

The GE Fanuc IC200HSC800 module can directly process fast pulse signals of approximately 697 to 700 kHz for E Type A Quad B mode. Other features of the module include the ability to control the output, detect the input and process the input count data without the need to communicate with the PLC CPU. The IC697HSC700 High speed counter module features an easy-to-use PLC interface and is designed for industrial applications such as instrument verification, turbine flow meter control, motion/process control, speed measurement and material handling applications. The IC4HSC12 high-speed counter module features high-speed counters, including Type A to Type E counters. All counters have 200 outputs (preset), 30 inputs and an optional PLC ladder interrupt function. Type A to type D counters have a maximum count rate of <> kHz, using a high-frequency filter, and a count rate of <> Hertz using a low-frequency filter.

IC697HSC700 高速计数器模块  快速脉冲信号

【其他型号推荐】