GE IC697BEM741  FIP 总线控制器 双通道总线控制器

【产品详情】

IC697BEM741 FIP 总线控制器是用于 GE 发那科 90-70 系列 FIP 总线控制器系统的双通道总线控制器。该FIP总线控制器允许GE IC697 PLC连接到1.0兆位FIP或WorldFIP （EN50170）现场总线网络。IC697BEM741 FIP 总线控制器最多可容纳 128 个现场设备，包括现场控制 I/O 模块（使用 FIP 总线接口单元）、FIP 现场总线网络接口 90-70 系列和 90-30 系列 PLC、90-30 系列 I/O 机架（使用 FIP 远程 I/O 扫描仪模块）和通用设备，如总线接口通用计算机（使用 FIP 接口模块）。IC697BEM741总线控制器可以串行扫描 FIP 总线上的 I/O 设备，并在每次完成迭代扫描时将 I/O 数据传输到 CPU。在扫描过程中，IC697BEM741总线控制器独立搜索任何连接的远程设备，将PLC的输出数据广播到连接的设备，允许从现场设备传输与时间相关的消息，并从连接的现场设备接收诊断消息。

GE Fanuc IC697BEM741 FIP 总线控制器占用 GE IC697 PLC VME 集成器机架（IC697CHS782或IC697CHS783机架）中的单个插槽。IC697BEM741 FIP 总线控制器可以使用基于 Windows 的 Logicmaster 系列 90-70 编程软件或 CIMPLICITY Control 90 编程软件进行配置。IC697BEM741总线控制器在前面板上带有 6 个 LED 指示灯。顶部 2 个 LED 指示灯（“模块正常”和“运行”LED）显示模块的运行状态，而底部 4 个 LED 指示设备上的通信状态。IC697BEM741总线控制器还直接在 LED 指示灯下方有一个按钮，用于本地复位。它带有一个 15 针串行连接器，可连接到 PC 以升级操作固件，它还具有 2 个 FIP 总线 9 针连接器（通道 1 和 2），用于连接 2 个 FIP 总线。

IC697BEM741是由GE Fanuc制造的FIP总线控制器（FBC）。 该器件允许IC697 PLC连接到1 Mbit FIP或WorldFIP现场总线网络。它可以扫描来自 IC693 FIP 远程 I/O 扫描仪、FIP IC670 模块以及与 GE Fanuc 90-70 IC697BEM741相关的通用 FIP 设备的 FIP I/O。

该IC697BEM741的亮点包括一个 2 通道总线控制器，该控制器占用标准或 VME 集成商机架中的单个插槽。FBC 配置了 Logicmaster 90-70 或控制编程软件配置功能。总线控制器同时扫描 FIP 总线上的 I/O 设备，每次扫描一次将 I/O 数据传输到 CPU。IC31 PLC系统中最多可以包含697个不同的总线控制器。其中，四个可以是 FIP 总线控制器。

FIP 总线可以为远程丢弃提供服务（也称为 IC693 I/O 机架，通过远程 I/O 扫描仪模块连接到总线）。每个远程丢弃可以由任何分立和模拟 I/O 模块组成;现场控制站（又名现场控制 I/O 模块，通过 FIP 总线接口单元连接到总线）;和通用设备，包括通过第三方 FIP 模块连接到总线的计算机。FIP 总线主要用于 I/O 控制，可用于将配置数据存储到远程设备并报告故障。

GE IC697BEM741  FIP 总线控制器 双通道总线控制器

【英文介绍】

The IC697BEM741 FIP bus controller is a dual-channel bus controller for GE Fanuc 90-70 series FIP bus controller systems. The FIP bus controller allows the GE IC697 PLC to connect to a 1.0 megabit FIP or WorldFIP (EN50170) fieldbus network. The IC697BEM741 FIP Bus controller can accommodate up to 128 field devices, Includes field control I/O modules (using FIP bus interface units), FIP Field Bus network interface series 90-70 and series 90-30 PLCS, Series 90-30 I/O racks (using FIP remote I/O scanner modules) and general equipment, Such as bus interface general purpose computer (using FIP interface module). The IC697BEM741 bus controller can scan I/O devices on the FIP bus in serial and transfer I/O data to the CPU each time an iterative scan is completed. During scanning, the IC697BEM741 bus controller independently searches for any connected remote device, broadcasts the output data from the PLC to the connected device, allows time-related messages to be transmitted from the field device, and receives diagnostic messages from the connected field device.

The GE Fanuc IC697BEM741 FIP bus controller occupies a single slot in the GE IC697 PLC VME integrator rack (IC697CHS782 or IC697CHS783 rack). The IC697BEM741 FIP bus controller can be configured using the Windows-based Logicmaster Series 90-70 programming software or the CIMPLICITY Control 90 programming software. The IC697BEM741 bus controller has 6 LED indicators on the front panel. The top 2 leds (" Module Normal "and" Running "leds) show the operating status of the module, while the bottom 4 leds indicate the communication status on the device. The IC697BEM741 bus controller also has a button directly below the LED indicator for local reset. It comes with a 15-pin serial connector that connects to a PC to upgrade the operating firmware, and it also has 2 FIP bus 9-pin connectors (channels 1 and 2) for connecting 2 FIP buses.

The IC697BEM741 is a FIP bus controller (FBC) manufactured by GE Fanuc. This device allows the IC697 PLC to connect to a 1 Mbit FIP or WorldFIP fieldbus network. It can scan FIP I/O from the IC693 FIP Remote I/O scanner, the FIP IC670 module, and generic FIP devices related to the GE Fanuc 90-70 IC697BEM741.

Highlights of the IC697BEM741 include a 2-channel bus controller that occupies a single slot in a standard or VME integrator rack. FBC configures the Logicmaster 90-70 or control programming software configuration function. The bus controller simultaneously scans the I/O devices on the FIP bus, transferring the I/O data to the CPU once per scan. The IC31 PLC system can contain up to 697 different bus controllers. Of these, four can be FIP bus controllers.

The FIP bus can provide services for remote discard (also known as the IC693 I/O rack, which is connected to the bus via the remote I/O scanner module). Each remote drop can consist of any discrete and analog I/O module; Field control station (aka field control I/O module, connected to bus via FIP bus interface unit); And generic devices, including computers connected to the bus through third-party FIP modules. The FIP bus is primarily used for I/O control and can be used to store configuration data to remote devices and report faults.

【其他型号推荐】