GE Fanuc IC697BEM735 远程 I/O 扫描程序

【产品详情】

GE Fanuc IC697BEM735远程 I/O 扫描仪是 GE IC697 系列 90-70 PLC 系统的智能 I/O 扫描仪模块。该模块设计用于将标准IC697 I/O模块和其他模拟扩展器模块、PCM和总线发送器连接到IC66总线系统。IC697BEM735远程I/O扫描仪设计简单，由一块电路板组成，上面覆盖着一个铰链式透明门，用作面板。它有 3 个 LED 指示灯，通过透明铰链门亮起，扫描仪模块的后端是一个 9 针公头 D 型连接器、一个 15 针母头 D 型 RS-422/485 串行连接器和 16 个可拆卸的 IC66 总线端子。IC697BEM735远程I/O扫描仪通过使用IC66 Genius手持监视器或MS-DOS编程软件配置功能进行配置。

 GE Fanuc IC697BEM735远程 I/O 扫描仪只需将其插入 GE IC697 机架中的兼容连接插槽，即可轻松安装和部署在任何标准工业应用过程中。接线端接由位于扫查器正面下侧的相应螺钉制成。有关需要使用的接线类型的规格，请参见制造商随附的用户手册。编程和通信连接接口的选项包括一个 9 针手持连接器和一个 RS-422/485 串行端口。当正确安装在定期接受适当维护的受保护外壳内时，GE Fanuc IC697BEM735远程I/O扫描仪旨在承受大多数类型工业环境中存在的所有条件。

GE IC697BEM735远程I / O扫描仪可以支持距离主机PLC最远7,500英尺（2,275米）的连接，还可以支持离散和模拟输入和输出的混合，总共多达1024个离散输入/输出，或64个模拟输入/输出。除了标准的IC697 PLC系统外，IC697BEM735远程I/O扫描仪模块还支持各种IC66主机设备，如QBIM，PCIM，带PCIM的主机PC，IC660 PLC，IC655 PLC或基于GENI的第三方接口设备。远程 I/O 扫描仪（如 IC697BEM735 或 IC697BEM733 扫描仪）和 I/O 模块的连接构成了 IC66 总线上的远程压降。单个 IC66 总线最多可容纳 30 个远程分支，单个远程分支最多可以包含 8 个设备，具有 5 插槽 IC697 机架、9 插槽 IC697 机架或两者的混合，最大距离为 15 米。

GE Fanuc IC697BEM735 远程 I/O 扫描程序

【英文介绍】

The GE Fanuc IC697BEM735 Remote I/O scanner is an intelligent I/O scanner module for the GE IC697 series 90-70 PLC system. The module is designed to connect the standard IC697 I/O module and other analog extender modules, PCM and bus transmitters to the IC66 bus system. The IC697BEM735 remote I/O scanner is a simple design consisting of a circuit board covered with a hinged transparent door that serves as a panel. It has 3 LED indicators that light up through a transparent hinged door, and the back end of the scanner module is a 9-pin male type D connector, a 15-pin female type D RS-422/485 serial connector, and 16 detachable IC66 bus terminals. The IC697BEM735 remote I/O scanner is configured using the IC66 Genius handheld Monitor or MS-DOS programming software configuration function.

The GE Fanuc IC697BEM735 Remote I/O scanner can be easily installed and deployed in any standard industrial application process by simply plugging it into a compatible connection slot in the GE IC697 rack. Terminal connections are made of corresponding screws located on the lower side of the front face of the scanner. Refer to the manufacturer's accompanying user manual for specifications on the type of wiring you need to use. Options for programming and communication connection interfaces include a 9-pin handheld connector and an RS-422/485 serial port. When properly installed in a protected housing that receives proper maintenance on a regular basis, the GE Fanuc IC697BEM735 remote I/O scanner is designed to withstand all the conditions that exist in most types of industrial environments.

The GE IC697BEM735 remote I/O scanner can support connections up to 7,500 feet (2,275 m) from the host PLC, and can also support a mix of discrete and analog inputs and outputs, up to 1024 discrete inputs/outputs in total, or 64 analog inputs/outputs. In addition to the standard IC697 PLC system, the IC697BEM735 remote I/O scanner module also supports various IC66 host devices such as QBIM, PCIM, host PC with PCIM, IC660 PLC, IC655 PLC or GENI based third-party interface devices. The connection of a remote I/O scanner (such as the IC697BEM735 or IC697BEM733 scanner) and the I/O module constitutes the remote voltage drop on the IC66 bus. A single IC66 bus can accommodate up to 30 remote branches, and a single remote branch can contain up to eight devices with 5-slot IC697 racks, 9-slot IC697 racks, or a mixture of both, at a maximum distance of 15 meters.

GE Fanuc IC697BEM735 远程 I/O 扫描程序

【其他型号推荐】