GE IC697ACC624 机架风扇组件 滚珠轴承

【产品详情】

IC697ACC624是一个机架风扇组件，每个组件提供两个风扇，安装非常容易。安装所需的唯一工具是#2十字头螺丝刀。这种特殊的机架风扇可与 5 插槽 90-70 系列机架或 9 插槽 PACSystems RX7i 机架一起使用。IC697ACC624风扇组件为可能存在热量积聚问题的安装提供了额外的机架冷却。

低噪音水平将是任何完整组件的受欢迎补充，因为这是通过使用滚珠轴承延长使用寿命来实现的。根据制造商的说法，建议将风扇连接到与 PLC 相同的电源，以确保风扇在 PLC 处于活动状态时正常工作。两个风扇中的每一个都通过使用电缆组件并联连接。电缆组件随套件一起提供，并插入位于背面的风扇接线连接器。剥线端可用于连接 120 或 240 VAC 电源适配器，由用户选择。

IC697ACC624 与以下机架类型兼容：IC697CHS750、IC697CHS109 和IC698CHS009。如果从背面查看机架风扇组件，接线连接器位于任一风扇外壳的右侧。风扇的位置允许冷空气从底部向上流动，以保持整个装置的冷却。卸下和更换每个风扇时，机架之间至少需要 28 英寸。风扇上的过滤器可以根据需要通过提起位于塑料固定器所有四个侧面的卡舌来清洁或更换。该组件的工作温度在 -60 至 +<> 摄氏度之间。

IC697ACC624风扇组件是由GE Fanuc Automation制造的风扇组件。这些风扇主要用于经常积聚热量的工业环境。在这些类型的环境中，过热会对电子元件造成多重损坏，或者作为安全测量导致机器操作突然停止，这是需要像IC697ACC624风扇组件这样的风扇组件的主要原因。它可以冷却连接和整个主机系统，而不会影响其正常运行。这种类型的设备还有助于应用程序流程顺利运行。GE Fanuc自动化IC697ACC624风扇组件包括2个不同的风扇。这些风扇还配备了低噪音机构，并且还采用滚珠轴承，有助于它们具有更长的使用寿命。

GE Fanuc Automation Series 90-70 IC697ACC624风扇组件中的每个风扇的输入额定功率为 16 至 20 瓦，线路电流额定值为 0.09 至 0.14 安培，它们的工作电压额定值为 240 伏交流电。每个风扇的标称气流不带过滤器高达 108 CFM。该组件配有聚氨酯泡沫过滤器，额定孔数为每平方英寸 30 个孔。GE Fanuc自动化IC697ACC624风扇组件可以承受-28至70摄氏度的工作温度范围，并配有UL94V-0塑料固定器。由于此风扇组件带有 2 个风扇，因此它与 5 插槽 90-70 系列机架和 9 插槽 RX7i 机架兼容。整个组件的重量约为 4 磅。

GE IC697ACC624 机架风扇组件 滚珠轴承

【英文介绍】

The IC697ACC624 is a rack fan assembly that provides two fans per assembly and is very easy to install. The only tool required for installation is the #2 crosshead screwdriver. This special rack fan can be used with a 5-slot 90-70 series rack or a 9-slot PACSystems RX7i rack. The IC697ACC624 fan assembly provides additional rack cooling for installations where heat buildup may be an issue.

Low noise levels would be a welcome addition to any complete assembly, as this is achieved through the use of ball bearings for extended service life. According to the manufacturer, it is recommended to connect the fan to the same power supply as the PLC to ensure that the fan works properly when the PLC is active. Each of the two fans is connected in parallel by using a cable assembly. The cable assembly is supplied with the kit and plugs into the fan wiring connector located on the back. The strip end can be used to connect a 120 or 240 VAC power adapter, at the user's choice.

The IC697ACC624 is compatible with the following rack types: IC697CHS750, IC697CHS109, and IC698CHS009. If viewing the rack fan assembly from the rear, the wiring connector is located on the right side of either fan housing. The fan is positioned to allow cold air to flow up from the bottom to keep the entire unit cool. When removing and replacing each fan, you need at least 28 inches between the racks. The filter on the fan can be cleaned or replaced as needed by lifting the latch located on all four sides of the plastic holder. The component operates at temperatures between -60 and +<> degrees Celsius.

The IC697ACC624 fan assembly is a fan assembly manufactured by GE Fanuc Automation. These fans are mainly used in industrial environments where heat often accumulates. In these types of environments, overheating can cause multiple damage to electronic components, or as a safety measurement cause a sudden stop in machine operation, which is the main reason for the need for fan assemblies like the IC697ACC624 fan assembly. It can cool the connection and the entire host system without affecting its normal operation. This type of device also helps the application process run smoothly. GE Fanuc Automation IC697ACC624 Fan assembly consists of 2 different fans. These fans are also equipped with a low noise mechanism and also feature ball bearings, helping them to have a longer service life.

Each fan in the GE Fanuc Automation Series 90-70 IC697ACC624 fan assembly has an input power rating of 16 to 20 watts, a line current rating of 0.09 to 0.14 amps, and their operating voltage rating is 240 volts AC. Nominal airflow per fan up to 108 CFM without filter. The unit is equipped with a polyurethane foam filter with a rating of 30 holes per square inch. The GE Fanuc Automation IC697ACC624 fan assembly can withstand an operating temperature range of -28 to 70 degrees Celsius and is equipped with an UL94V-0 plastic holder. Since this fan assembly comes with 2 fans, it is compatible with 5-slot 90-70 series racks and 9-slot RX7i racks. The entire assembly weighs about 4 pounds.

GE IC697ACC624 机架风扇组件 滚珠轴承

【其他型号推荐】