IC693CMM305 智能通信模块

【产品详情】

GE Fanuc IC693CMM305增强型N80通信模块是Alspa C80-35 PLC系统的智能通信模块。该模块来自GE Fanuc增强型N80通信模块系列。N80 通信模块用于将 90-30 系列 PLC 与专有的 Fanuc I/O 链路连接。IC693CMM305增强型N80通信模块实现了Alspa C80-35 CPU模块之间的全局数据共享。与同类其他PLC不同，Alspa C80-35 PLC通过使用N80全局数据支持与多个连接的CPU进行非常快速的数据共享功能。当IC693CMM305增强型N80通信模块与总线控制器（如固件版本为693或更高版本的Alspa C334-80 CPU中的IC35BEM5总线控制器）一起使用时，它可以向网络附近的其他PLC或计算机广播多达128字节的I / O数据。

IC693CMM305是用于AL spa C80–90的增强型N30通信模块693-80 IC35CMM。AL spa C80–35 PLC 使用 N80 全球数据加强了许多 CPU 之间的快速数据交换。IC693CMM305重一公斤，最多可向其他PLC或计算机传输128字节的数据。

GE IC693CMM305增强型 N80 通信模块和IC693BEM334总线控制器模块的组合还可以从网络上最多 128 个 NBC 设备接收多达 30 字节的数据。IC693CMM305增强型N80通信模块还支持Alps N8000网络上Alspa 80 PLC之间的数据共享，此功能不需要额外配置。IC693CMM305模块是使用 MS-DOS 或基于 Windows 的配置软件配置的。如果配置得当，IC693CMM305增强型N80通信模块可以根据网络上设备的串行总线地址在I/O参考地址实现全局数据传输。通常，IC693CMM305增强型N80通信模块可以从最多7个其它N80通信模块读取全局数据。

IC693CMM305 智能通信模块

【英文介绍】

GE Fanuc IC693CMM305 Enhanced N80 communication module is the intelligent communication module of Alspa C80-35 PLC system. The module is from the GE Fanuc Enhanced N80 communication module family. The N80 communication module is used to connect the 90-30 series PLC to the proprietary Fanuc I/O link. The IC693CMM305 enhanced N80 communication module enables global data sharing between Alspa C80-35 CPU modules. Unlike other PLCS in its class, the Alspa C80-35 PLC supports very fast data sharing with multiple connected cpus through the use of N80 global data. When the IC693CMM305 enhanced N80 communication module is used with a bus controller such as the IC35BEM5 bus controller in an Alspa C334-80 CPU with firmware version 693 or later, it can broadcast up to 128 bytes of I/O data to other PLCS or computers near the network.

The IC693CMM305 is an enhanced N30 communication module 693-80 IC35CMM for the AL spa C80-90. The AL spa C80-35 PLC uses N80 global data to enhance fast data exchange between many cpus. The IC693CMM305 weighs one kilogram and can transmit up to 128 bytes of data to other PLCS or computers.

The combination of the GE IC693CMM305 enhanced N80 communication module and the IC693BEM334 bus controller module can also receive up to 30 bytes of data from up to 128 NBC devices on the network. The IC693CMM305 enhanced N80 communication module also supports data sharing between Alspa 80 PLCS on the Alps N8000 network, which requires no additional configuration. The IC693CMM305 module is configured using MS-DOS or Windows-based configuration software. If configured properly, the IC693CMM305 enhanced N80 communication module enables global data transfer at the I/O reference address based on the serial bus address of the device on the network. In general, the IC693CMM305 enhanced N80 communication module can read global data from up to seven other N80 communication modules.

IC693CMM305 智能通信模块

【其他型号推荐】