GE IC693CHS393 远程底板 具有内置隔离功能

【产品详情】

产品描述

GE Fanuc IC693CHS393是一个 10 插槽远程底板。 该组件专为GE系列90-30 PLC系统而设计。在操作任何应用程序时，用户应了解有关本机的一些事项。首先，在任何使用远程底板的系统中，连接所有底板的电缆总量必须小于 700 英尺。此外，远程底板不能是独立单元。相反，它必须连接到具有 CPU 的系统。该 CPU 可能位于可编程逻辑控制器 （PLC） 中，也可能位于 PC 中。但是，PC 必须配备个人计算机接口卡。

远程底板具有内置隔离功能。这是位于远程基板中的 I/O 模块使用的 +5 V 逻辑电源与接口电路的电源（与 I/O 总线扩展接口相关联）之间的电源。不平衡的地面条件会导致问题，因此隔离以解决这些问题非常重要。系统中的 CPU 类型将决定可以使用的远程底板的数量。CPU 4、331 和 340 的最大值为 341。对于编号为 350 及更高的所有 CPU，可以使用的最大数量为 7。

远程背板不支持一些智能选件模块 - PCM、CMM、ADC 和 BEM330。要使用这些模块，用户必须将它们安装在 CPU 底板上。所有其他 I/O 模块和选件模块都可以安装在任何类型的底板上。与扩展底板类似，远程底板使用相同类型的电源，并支持相同的 I/O 模块和选件模块。它们也是相同的物理尺寸。在每个远程底板的右端都有一个 25 针 D 型母扩展连接器。这是为了连接到其他底板。每个远程底板还具有机架编号选择 DIP 开关。

技术规格

模块类型： 扩展 I/O 底座

底板选项： 扩张

距离： 高达 700 英尺

插槽数量： 10

尺寸： 17.44 x 5.12 x 5.59 英寸（宽 x 高 x 深）

使用的内部电源： 460 毫安 @ 5 伏直流

GE Fanuc IC693CHS393底板是GE 10-90系列PLC系统的30插槽底板。它使用 460 毫安电流以及 5 伏直流电的逻辑电压额定值。它可以轻松连接 700 英尺距离内的所有底板。它的尺寸为宽 17.44 英寸、高 5.12 英寸和深 5.59 英寸。它不是一个独立的单元。相反，它与整个PLC系统或计算机一起使用。这种扩展IC693CHS393底板上设有个人计算机接口卡。此卡可帮助它连接到个人计算机并与计算机高效运行。它一次最多可支持 4 个 90-30 系列 CPU。对于部件号高于 90 的 30-350 系列 CPU，底板最多可支持 7 个 CPU。底板具有内置隔离功能。隔离有助于解决由于不平衡的地面条件而可能出现的问题。

GE 90-30系列IC693CHS393底板支持远程操作功能。系统支持的最大远程底板数取决于所使用的一个或多个 CPU 类型。底板配有一个 25 针 D 型母扩展连接器，该连接器位于底板的右边缘，用于与另一个底板连接。IC693CHS393底板在底板右侧同时具有 CPU 插槽和非 CPU 插槽以及扩展插槽。除插槽外，底板还配有机架编号 DIP 开关。出于安全原因，在安装过程中，PLC设备必须与主电源完全断开。底板应防止来自各个方向的喷水，以免损坏水。

IC693CHS393底板是一个10插槽远程底板，由GE Fanuc Automation设计用于90-30系列PLC。该底板非常适合用于设备相距较远的应用。此扩展底板可用于与 CPU 的最大电缆距离达 213 米。底板是远程底板类型，带有 10 个插槽，可与不同的模块和设备一起使用。将GE Fanuc自动化IC693CHS393 10插槽远程底板与应用中其余设备连接的电缆需要100%屏蔽，以便数据不会丢失或受到沿途其他信号的影响。如果现有电缆没有屏蔽，则有一种方法可以屏蔽它们，以便它们可以在此连接中工作。

有必要对GE Fanuc自动化IC693CHS393 10插槽远程底板引脚进行修改，以便配接电缆正确插入基板上，以满足其应用的需求。这种修改需要对工厂制造的星形电缆进行，特别是需要插入底板的电缆的公端。GE Fanuc自动化IC693CHS393 10插槽远程底板电缆由塑料外壳盖制成，需要按照手册的规定进行接线。建议让有执照的技术人员执行这种安装，因为它有些复杂。该基板工作在 5 伏直流标称电压下，需要 460 毫安的背板电流。它由安装在其金属表面的电路板和塑料盖组成.它带有插入式模块和 4 个安装孔。

GE IC693CHS393 远程底板 具有内置隔离功能

【英文介绍】

Product description

The GE Fanuc IC693CHS393 is a 10-slot remote baseboard. This module is designed for GE series 90-30 PLC systems. When operating any application, the user should know a few things about the machine. First, in any system that uses remote baseboards, the total amount of cable connecting all baseboards must be less than 700 feet. In addition, the remote backplane cannot be a stand-alone unit. Instead, it must be connected to a system with a CPU. The CPU may be located in a programmable logic controller (PLC), or it may be located in a PC. However, the PC must be equipped with a PC interface card.

Remote baseboard with built-in isolation. This is the power supply between the +5 V logic power supply used by the I/O module located in the remote substrate and the power supply of the interface circuit (associated with the I/O bus expansion interface). Unbalanced ground conditions can cause problems, so isolation to address these issues is important. The type of CPU in your system will determine the number of remote backboards that can be used. Cpus 4, 331, and 340 have a maximum value of 341. For all cpus numbered 350 and higher, the maximum number that can be used is 7.

The remote backplane does not support some smart option modules - PCM, CMM, ADC and BEM330. To use these modules, the user must install them on the CPU backboard. All other I/O modules and option modules can be mounted on any type of backboard. Similar to expansion backboards, remote backboards use the same type of power supply and support the same I/O modules and option modules. They are also the same physical size. There is a 25-pin D-type female expansion connector at the right end of each remote baseplate. This is for connection to other baseboards. Each remote baseboard also has a rack number select DIP switch.

Technical specification

Module type: Expansion I/O base

Baseboard option: Expand

Distance: Up to 700 feet

Number of slots: 10

Dimensions: 17.44 x 5.12 x 5.59 inches (W x H x D)

Internal power supply used: 460 mah @ 5 V DC

GE Fanuc IC693CHS393 baseboard is a 30-slot baseboard for GE 10-90 series PLC systems. It uses 460 milliamps of current and a logical voltage rating of 5 volts DC. It can easily connect all baseboards within a distance of 700 feet. Its dimensions are 17.44 inches wide, 5.12 inches high and 5.59 inches deep. It's not a separate unit. Instead, it is used with an entire PLC system or computer. This extension IC693CHS393 has a personal computer interface card on the backboard. This card helps it connect to a personal computer and run efficiently with the computer. It supports up to four 90-30 series cpus at a time. For 30-350 series cpus with part numbers higher than 90, the baseboard can support up to seven cpus. Baseplate has built-in isolation function. Isolation helps solve problems that may arise due to unbalanced ground conditions.

GE 90-30 series IC693CHS393 mainboard supports the remote operation function. The maximum number of remote backboards supported by the system depends on one or more CPU types used. The base plate is equipped with a 25-pin D-type female expansion connector, which is located on the right edge of the base plate for connection to the other base plate. IC693CHS393 Mainboard The IC693CHS393 mainboard has a CPU slot, a non-CPU slot, and an expansion slot on the right side of the mainboard. In addition to the slots, the baseplate is equipped with rack number DIP switches. For safety reasons, the PLC equipment must be completely disconnected from the main power supply during installation. The bottom plate should be prevented from spraying water from all directions to avoid damaging the water.

The IC693CHS393 backboard is a 10-slot remote backboard designed by GE Fanuc Automation for use in the 90-30 series PLC. The backboard is ideal for applications where devices are located far apart. This expansion backboard can be used for a maximum cable distance from the CPU up to 213 meters. The backboard is a remote backboard type with 10 slots that can be used with different modules and devices. The cable connecting the GE Fanuc Automation IC693CHS393 10-slot remote backboard to the rest of the device in the application needs to be 100% shielded so that data is not lost or affected by other signals along the way. If existing cables are not shielded, there is a way to shield them so that they can work in this connection.

It is necessary to modify the GE Fanuc automation IC693CHS393 10 slot remote backboard pin so that the wiring cable is correctly inserted into the substrate to meet the needs of its application. This modification is required for factory-made star-shaped cables, especially the male end of the cable that needs to be plugged into the base plate. GE Fanuc Automation IC693CHS393 10-slot remote baseboard cable is made of plastic housing cover and needs to be wired according to the manual. Having a licensed technician perform this installation is recommended, as it is somewhat complex. The substrate operates at a nominal voltage of 5 volts DC and requires 460 mA of backplane current. It consists of a circuit board and a plastic cover mounted on its metal surface. It comes with a plug-in module and 4 mounting holes.

GE IC693CHS393 远程底板 具有内置隔离功能

【其他型号推荐】