GE IC693CHS392  I/O 总线扩展底板

【产品详情】

产品描述

IC25CHS10,693 针 D 型 392 插槽 I/O 总线扩展底板有多种用途。它基本上用作 PLC 本地机箱，但也可用于将 I/O 扩展到附近相距不超过 50 英尺（15 米）的其他位置（称为本地 I/O 扩展）。本地 I/O 扩展允许用户增加 PLC 的 I/O，并在单个处理器的监控下增强控制。底板上没有 CPU。对于 I/O 靠近本地机箱的小型 PLC 系统，本地 I/O 扩展是一个不错的选择。

IC693CHS392扩展底板有一个 25 针 D 型母头 I/O 总线扩展连接器，安装在其右端。 此连接器用于连接到其他底板。它有 10 个插槽，从 1 到 10 串行标记。底板不能独立。它必须安装在具有 CPU 的系统的 CPU 底板上，无论是在 PLC 中还是在具有个人计算机接口 （PCI） 卡的个人计算机中。第一个扩展基板通过一根短的并行电缆连接到 CPU 的底板，该电缆在 CPU 基板和本地扩展的 I/O 底板之间提供无缝并行数据传输。CPU 的类型决定了系统中可以安装的最大扩展底板数。CPU 331、340 和 341 最多允许 4 个基板，而 CPU 350 及更高版本最多允许 7 个基板。必须向扩展底板供电，并且必须根据底板的模块以及将放置在每个底板电源上的本地负载进行计算。

IC693CH392具有机架号选择 DIP 开关，必须连接到公共接地，并且不支持以下智能选件模块：PCM、ADC、BEM330 和 CMM311。这些模块必须安装在 CPU 底板上，而所有其他 I/O 和选件模块可以安装在任何类型的机架中。

技术规格

模块类型： 扩展 I/O 底座

底板选项： 扩张

距离： 长达 50 英尺

插槽数量： 10

尺寸： 17.44 x 5.12 x 5.59 英寸（宽 x 高 x 深）

使用的内部电源： 150 毫安 @ 5 伏直流

IC693CHS392底板是GE Fanuc的扩展底板。它与90-30系列GE PLC系统兼容。它是一个 PLC 机箱，但它也可以用作位于不同位置的其他 I/O 的扩展。底板与PLC系统一起使用，或将其与使用PCI卡的个人计算机连接。它一次最多可以连接 7 个 CPU，具体取决于 CPU 型号。底板的额定电压为 5 伏直流电。它的额定电流为 150 毫安。底板长443毫米，宽142毫米，高130毫米。IC693CHS392底板右侧配有 25 针 D 型母头 I/O 扩展连接器，可与其他底板高效连接。

IC693CHS392底板具有电源端口、CPU 插槽和非 CPU 插槽。它可以很容易地安装在90-30系列PLC系统中。底板上还存在一个 DIP 开关以及所有插槽。IC693CHS392底板采用开放式架构，在安装和更换过程中可以轻松访问。它只能用于室内应用，并且应彻底防止水溅。底板应远离所有灰尘和热源。扩展槽支持许多设备，但不支持 PCM、ADC 和 CMM 设备等智能选件模块。在安装过程中，互连扩展底板与CPU底板之间的距离不应超过15米。

GE Fanuc IC693CHS392 系列 90-30 扩展 I/O 底座是一款固态可编程逻辑控制器 （PLC） 背板，旨在为需要易于安装的设备托管解决方案的工业应用提供多达 10 个额外的 I/O 模块连接插槽。GE Fanuc IC693CHS392扩展 I/O 底座为用户提供了扩展其控制架构的可能性，方法是在距离 PLC 中主处理器 50 英尺（15.24 米）的距离内添加更多 I/O 模块。扩展 I/O 基座和主 PLC 之间的数据传输通过专为此应用设计的 25 针 D 型母头 I/O 总线扩展连接进行。没有CPU直接连接到此扩展底座，因为它必须通过PCI卡连接到主PLC或个人计算机。

GE Fanuc IC693CHS392扩展 I/O 底座设计用于室内，环保等级为 IP 20，工作温度范围为 -25 至 70 摄氏度（-13 至 158 华氏度）。GE Fanuc IC693CHS392扩展I/O底座出厂时尺寸为17.44 x 5.12 x 5.59英寸。在给定应用程序中可以安装的附加扩展 I/O 基础的最大数量将根据主要 CPU 规格而有所不同。来自 331、340 和 341 系列的 GE Fanuc CPU 最多允许 4 个额外的 I/O 扩展底座，而来自 350 和更新系列的 CPU 最多可以使用 7 个基板。只有经过适当培训的技术人员才能对IC693CHS392扩展 I/O 基座执行维护或维修工作，因为它对 ESD 高度敏感。

GE IC693CHS392  I/O 总线扩展底板

【英文介绍】

Product description

The IC25CHS10, 693-pin Type D 392 slot I/O bus expansion backboard has a variety of uses. It is basically used as a PLC local chassis, but can also be used to expand I/O to other nearby locations that are no more than 50 feet (15 meters) apart (called local I/O expansion). Local I/O scaling allows users to increase the I/O of the PLC and enhance control under the supervision of a single processor. There is no CPU on the mainboard. For small PLC systems where I/O is close to the local chassis, local I/O expansion is a good choice.

The IC693CHS392 expansion baseplate has a 25-pin type D female I/O bus expansion connector mounted on its right end. This connector is used to connect to other baseboards. It has 10 slots, marked serial from 1 to 10. The base plate cannot be independent. It must be installed on the CPU baseboard of a system with a CPU, either in a PLC or in a personal computer with a Personal computer interface (PCI) card. The first expansion substrate is connected to the CPU's backboard via a short parallel cable that provides seamless parallel data transfer between the CPU baseboard and the locally extended I/O backboard. The type of CPU determines the maximum number of expansion boards that can be installed in the system. Cpus 331, 340, and 341 allow up to four substrates, while cpus 350 and later allow up to seven substrates. Power must be supplied to the expansion baseboard, and calculations must be made based on the modules of the baseboard and the local load that will be placed on each baseboard power supply.

The IC693CH392 has a rack number selector DIP switch, must be connected to common ground, and does not support the following smart option modules: PCM, ADC, BEM330, and CMM311. These modules must be mounted on the CPU backboard, while all other I/O and option modules can be mounted in any type of rack.

Technical specification

Module type: Expansion I/O base

Baseboard option: Expand

Distance: Up to 50 feet

Number of slots: 10

Dimensions: 17.44 x 5.12 x 5.59 inches (W x H x D)

Internal power supply used: 150 MA @ 5 V DC

The IC693CHS392 baseboard is an extension baseboard of GE Fanuc. It is compatible with the 90-30 series GE PLC systems. It is a PLC chassis, but it can also be used as an extension for other I/ OS located in different locations. The backboard is used with a PLC system or connected to a personal computer using a PCI card. It can connect up to seven cpus at a time, depending on the CPU model. The rated voltage of the base plate is 5 volts DC. It has a rated current of 150 mA. The base plate is 443 mm long, 142 mm wide and 130 mm high. The IC693CHS392 is equipped with a 25-pin D-female I/O expansion connector on the right side of the chassis for efficient connection with other baseboards.

The IC693CHS392 baseboard has a power port, CPU slot, and non-CPU slot. It can be easily installed in the 90-30 series PLC system. There is also a DIP switch and all slots on the baseboard. The IC693CHS392 backboard has an open architecture that allows easy access during installation and replacement. It should only be used in indoor applications and should be thoroughly protected against water splashing. The bottom plate should be free from all dust and heat sources. Expansion slots support many devices, but not smart option modules such as PCM, ADC, and CMM devices. During installation, the distance between the interconnect expansion backboard and the CPU backboard should not exceed 15 meters.

GE Fanuc IC693CHS392 Series 90-30 Extended I/O Dock is a solid-state Programmable logic controller (PLC) backplane designed to provide up to 10 additional I/O module connection slots for industrial applications requiring an easy-to-install device hosting solution. The GE Fanuc IC693CHS392 Extended I/O Dock offers users the possibility to expand their control architecture by adding more I/O modules within 50 feet (15.24 m) of the main processor in the PLC. Data transfer between the extended I/O base and the main PLC is performed via a 25-pin D-female I/O bus expansion connection designed for this application. No CPU is directly connected to this expansion dock, as it must be connected to the main PLC or personal computer via a PCI card.

The GE Fanuc IC693CHS392 Extended I/O base is designed for indoor use with an environmental rating of IP 20 and an operating temperature range of -25 to 70 degrees Celsius (-13 to 158 degrees Fahrenheit). The GE Fanuc IC693CHS392 Extended I/O base measures 17.44 x 5.12 x 5.59 inches at the factory. The maximum number of additional extended I/O bases that can be installed in a given application will vary based on major CPU specifications. GE Fanuc cpus from the 331, 340, and 341 series allow up to four additional I/O expansion docks, while cpus from the 350 and newer series can use up to seven baseboards. Only properly trained technicians can perform maintenance or repair work on the IC693CHS392 Extended I/O base, as it is highly sensitive to ESD.

GE IC693CHS392  I/O 总线扩展底板

【其他型号推荐】